光伏太阳能电池生产过程中的污染问题

日益壮大的光伏产业正在为人类发展作出积极的贡献.采用光伏发电来代替传统的发电技术,将会减少89%的空气污染.然而,在这个倡导绿色环境的时代,光伏器件生产引起的环境、健康和安全（EHS）问题也日益引起社会各界的广泛关注.认清光伏产品在生产过程中污染的真相对维持光伏产业的可持续发展有着相当重要的意义.本文综述了常见太阳能电池的EHS问题,并提出了可以减少污染的有效途径;采用生命周期评估（LCA）方法进一步比较了各种太阳能电池生产过程中污染物的排放量数据.     

Natural deep eutectic solvents as new potential media for green technology

Developing new green solvents is one of the key subjects in Green Chemistry. Ionic liquids (ILs) and deep eutectic solvents, thus, have been paid great attention to replace current harsh organic solvents and have been applied to many chemical processing such as extraction and synthesis. However, current ionic liquids and deep eutectic solvents have still limitations to be applied to a real chemical industry due to toxicity against human and environment and high cost of ILs and solid state of most deep eutectic solvents at room temperature. Recently we discovered that many plant abundant primary metabolites changed their state from solid to liquid when they were mixed in proper ratio. This finding made us hypothesize that natural deep eutectic solvents (NADES) play a role as alternative media to water in living organisms and tested a wide range of natural products, which resulted in discovery of over 100 NADES from nature. In order to prove deep eutectic feature the interaction between the molecules was investigated by nuclear magnetic resonance spectroscopy. All the tested NADES show clear hydrogen bonding between components. As next step physical properties of NADES such as water activity, density, viscosity, polarity and thermal properties were measured as well as the effect of water on the physical properties. In the last stage the novel NADES were applied to the solubilization of wide range of biomolecules such as non-water soluble bioactive natural products, gluten, starch, and DNA. In most cases the solubility of the biomolecules evaluated in this study was greatly higher than water. Based on the results the novel NADES may be expected as potential green solvents at room temperature in diverse fields of chemistry.     

Biparametric potentiometric analytical microsystem for nitrate and potassium monitoring in water recycling processes for manned space missions

The construction and evaluation of a Low Temperature Co-fired Ceramics (LTCC)-based continuous flow potentiometric microanalyzer prototype to simultaneously monitor the presence of two ions (potassium and nitrate) in samples from the water recycling process for future manned space missions is presented. The microsystem integrates microfluidics and the detection system in a single substrate and it is smaller than a credit card. The detection system is based on two ion-selective electrodes (ISEs), which are built using all-solid state nitrate and potassium polymeric membranes, and a screen-printed Ag/AgCl reference electrode. The obtained analytical features after the optimization of the microfluidic design and hydrodynamics are a linear range from 10 to 1000 mg L⁻¹ and from 1.9 to 155 mg L⁻¹ and a detection limit of 9.56 mg L⁻¹ and 0.81 mg L⁻¹ for nitrate and potassium ions respectively.     

3D打印技术制备生物医用高分子材料的研究进展

3D打印技术能够根据不同患者需要,快速精确制备适合不同患者的个性化生物医用高分子材料,并能同时对材料的微观结构进行精确控制.因此,这种新兴的医用高分子材料制备技术在未来生物医学应用(尤其是组织工程应用)中具有独特的优势.近年来,对于3D打印技术制备生物医用高分子材料的研究开发受到了越来越多的关注.不同的生物相容高分子原料被应用于3D打印技术,而这些3D成型高分子材料被用于体外细胞培养,或动物模型的软组织或硬组织修复中.本文主要介绍了近年来3D打印技术在生物医用高分子材料制备中的研究进展,并对该领域的未来应用和挑战进行了展望.     

pH响应性P(MMA-co-MAA-co-HEMA)微凝胶的制备及其性能

利用预乳化乳液法制备了不同单体配比的聚(甲基丙烯酸甲酯-co-甲基丙烯酸-co-甲基丙烯酸羟乙酯)(P(MMA-co-MAA-co-HEMA))微凝胶分散液;采用透射电子显微镜、动态光散射仪研究了微凝胶的微观形态、粒径大小及其溶胀率;利用试管倒转法对微凝胶分散液的凝胶化相转变行为进行了研究,借助椎板流变仪考察了所形成胶态凝胶的储能模量与单体配比、微凝胶分散液浓度和温度的关系.结果表明,所制备的微凝胶的数均粒径为90 nm左右,当MMA与MAA的投料质量不变时,随着HEMA含量的增加,分散液凝胶化所需的临界最小浓度增大,临界最大pH值减小,胶态凝胶的储能模量增加.当保持单体MMA与HEMA的投料质量不变时,随着单体MAA投料质量的增多,微凝胶的数均粒径和溶胀率增大,胶态凝胶的储能模量先升高后降低;当MAA占单体总摩尔数的25%时,浓度为15 wt%的微凝胶分散液在扫描频率为100 rad/s时,胶态凝胶的储能模量最高可达2×104Pa.这类微凝胶分散液在组织工程支架材料方面有潜在的应用价值.     

基于ARM11的热力站远程水质监控系统设计

为实现对循环水水质的远程监测,设计并开发了一种基于嵌入式技术的热力站远程水质监测系统的监测终端。监测终端由水质传感器、GPRS模块、通信转换模块及嵌入式开发板组成。嵌入式开发板以ARM11系列的Tiny6410为硬件基础,并嵌入WinCE系统作为软件平台,同时加入SQLite数据库以实现将水质传感器采集到的氯离子、PH值、溶解氧等参数的本地存储、查询及图表显示。最后监测终端通过GPRS模块与数据中心建立无线连接,接收数据中心的配置命令,并将现场测得数据发送到远端数据中心。调试结果表明：远程监测终端实现了循环水水质远程监测的功能要求,对于实现水质自动化监测具有一定的理论意义和实用价值。     

Toward rapid preparation of capillary columns for electrochromatography use

CEC is a high performance electrodriving liquid phase separation technique. It does not need complex and sophisticated high pressure instrumentation for nanoflow driving. This is attractive for parallel multicolumn analysis. To this end, high throughput methods for column preparation are needed to support the use of multiple columns. In this study, we directly used CEC mobile phase solution as the packing solvent, and realized rapid preparation of capillary columns based on a single particle fritting technology. The method presented high preparation throughput compared with other reported methods based on various fritting technologies. The single particle fritting approach promoted column preparation throughput to 1 column/h, including all the fritting, packing and conditioning steps. The rapidly prepared columns showed consistently high efficiency of up to 150 000 plates per meter, and usefulness in reversed phase CEC of neutral, charged and biomolecules. With standard peptides as the sample, excellent long term reproducibility (better than 0.8%RSD, ten days, for retention times) was observed.     

RD496微热量计的研制及其应用

简要回顾了热导式微热量计的建立和发展,着重介绍了RD496微热量计的研制历程.归纳并介绍了RD496微热量计在化学和材料研究中的应用,包括物质晶型转化温度和转化热、溶解热和混合热、生成反应焓的测定,化学反应热动力学、稀释结晶动力学的研究,比热容和固体材料导热系数的测定,材料原位生长的量热研究和材料的微量吸附量热研究等;另外,对于其在高分子化学及物理、生物化学及农业科学等方面的应用进行了叙述.     

利用三维虚拟技术突破物质结构教学*——从演示型工具到探索型工具的转变

针对物质结构教学的抽象性,开发了一套基于三维虚拟技术的物质结构教学软件,可对结构模型进行旋转、平移、缩放、切割、镜像、插入或删除原子(团)及启停预先设置的动画等操作,强大的交互功能不仅能对分子或晶体结构如构造异构、立体异构、晶体的堆积方式、晶胞的划分、配位数、晶体结构中的空隙及空间利用率等问题进行效果极佳的可视化教学,另一方面,通过对B₁₂与C₆₀分子空间构型转变的探究揭示数学构型的重要性,通过对六方晶胞占有原子个数的探究修正晶胞模型,通过对金属晶体的4种基本堆积方式成因的探究提出“半密置层”概念来完善紧密堆积规律等案例,展示出三维虚拟技术在微观结构探索发现方面的巨大潜力。     

酸性电解水过程中氧析出反应的机理及铱基催化剂的研究进展北大核心CSCD

可持续能源的迅速发展,使绿色清洁的氢能源成为热点。质子交换膜(PEM)水电解是一项很有前途的技术,可高效生产高纯度氢气。IrO_(2)作为质子交换膜(PEM)水电解槽阳极氧析出反应(OER)的商用电催化剂,既能在强酸性、高强度腐蚀条件下保持稳定,又表现出优异的催化性能。然而,由于Ir的稀缺性和昂贵的价格,提高Ir基催化剂的OER活性,开发低Ir催化剂就显得至关重要。对其反应机理的认知是当前的研究热点之一,也是设计优异的OER催化剂的关键所在。因此,首先从OER机理出发,对目前被广泛认可的吸附物逸出机理(AEM)和晶格氧逸出机理(LOER)两种反应机理进行了研究。随后,根据所提出的这两种机理,介绍了OER催化剂设计的基本准则,即调控Ir基催化剂的电子结构,改善反应中间物种在催化活性位点上的吸附能,从而提高OER催化活性。并从催化剂的结构设计、形貌控制、载体材料3个方面简单概述了最近OER催化剂的研究进展。最后,在已有研究的基础上,提出了目前OER催化剂面临的困难与挑战,这为以后相关的研究指明了方向。