衍射极限储存环物理设计研究进展

总结了国内外在衍射极限储存环(DLSR)物理设计方面的研究进展。为了在合理的周长范围内实现超低束流发射度,DLSR线性束流光学设计普遍采用紧凑型多二极铁消色散结构。在非线性动力学优化中,通常采用相移控制技术、解析和数值优化技术减小由色品六极铁导致的强非线性效应。DLSR束流接受度较小,主要考虑脉冲多极铁偏轴注入和快速冲击磁铁在轴注入两种注入方案。束流集体效应(尤其是束流内部散射和托歇克散射效应)随发射度降低而增强,需要采用束长拉伸、横向反馈等方法提高DLSR中束流的稳定性。     

Optimization parameter design of a circular e+e- Higgs factory

In this paper we will show a general method of how to make an optimized parameter design of a circular e⁺e^- Higgs factory by using analytical expression of maximum beam-beam parameter and beamstrahlung beam lifetime starting from a given design goal and technical limitations. A parameter space has been explored. Based on beam parameters scan and RF parameters scan, a set of optimized parameter designs for 50 km Circular Higgs Factory (CHF) with different RF frequency was proposed.     

Beam-loss driven injection optimization for CSNS/RCS

This paper summarizes the painting injection optimization for the Chinese Spallation Neutron Source （CSNS） ring. This optimization focuses on two main design goals： the lower beam loss and a spacecharge tune shift low enough to avoid strong resonances. Finally, the 3-D particle tracking is performed and we get some important results about the beam properties and beam loss.     

Electron proton instability in the CSNS ring

The electron proton (e-p) instability has been observed in many proton accelerators. It will induce transverse beam size blow-up, cause beam loss and restrict the machine performance. Much research work has been done on the causes, dynamics and cures of this instability. A simulation code is developed to study the e-p instability in the ring of the China Spallation Neutron Source (CSNS).     

Electron Cloud in Various Kinds of Magnetic Field of BEPCⅡ

Electron cloud instability （ECI） may take place in a positron storage ring when the machine is operated with a multl-bunch positron beam. According to the actual shape of the vacuum chamber in the BEPCII, a programme which is different from the other simulation codes has been developed. Because of the distance between dipole magnet and sextupole, the quadrupote magnet of BEPCII is very short, much of the photoelectrons can be produced and can move in magnetic fields. The motion of electrons in various kinds of magnetic fields is studied in detail, especially for the solenoid field which will be wound in the vacuum pipe of BEPCII. Simulation shows that the solenoid field is very effective to confine the electrons to the vicinity of the vacuum chamber wall and to make an electron free region at the vacuum pipe centre.     

Electron proton instability in the CSNS ring

The electron proton (e-p) instability has been observed in many proton accelerators. It will induce transverse beam size blow-up, cause beam loss and restrict the machine performance. Much research work has been done on the causes, dynamics and cures of this instability. A simulation code is developed to study the e-p instability in the ring of the China Spallation Neutron Source (CSNS).     

用条纹相机测量BEPC的束团长度

在北京正负电子对撞机(BEPC)中,正负电子束团的长度及其拉伸是束流性能重要指标之一,它直接影响到物理实验的效率,对BEPC的改进和性能进一步提高也起着关键的作用.由于用条纹相机测束团长度,具有精度高,且直观的特点,因此,近年来条纹相机在加速器束团测量领域得到了广泛的应用.本文将介绍用条纹相机测量BEPC储存环束团长度的原理、方法、系统配置、误差分析及一些典型的测量结果.     

储存环超周期结构共振带的形成机制及应用

将环形加速器磁聚焦结构设计中, 传统的聚焦和散焦磁铁强度空间中的稳定图方法, 应用到更复杂的含有两个以上磁场梯度变量的超周期结构中, 从而更深入地理解结构共振的形成机制和隐含的物理意义. 利用文中给出的方法, 可以指导环形加速器磁聚焦结构的工作点选择. 对于一个给定的磁聚焦结构, 由于结构共振而导致的束流包络函数变化的不对称性, 则是其动力学孔径不对称的一个重要原因. 作为实例, 给出了在实际机器上的具体应用, 同时给出了动力学孔径的模拟计算结果.     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The accelerator of CSNS consists of a low energy linac, a Rapid Cycling Synchrotron (RCS) and two beam transport lines. The overall physics design of CSNS accelerator is described, including the design principle, the choice of the main parameters and design of each part of accelerators. The key problems of the physics design, such as beam loss and control, are also discussed. The interface between the different parts of accelerator, as well as between accelerator and target, are introduced.     

Working principles of the energy measurement system at BEPCⅡ

The proposed beam energy measurement system at BEPCⅡ is composed