纤维素基吸附分离材料研究进展

以纤维素为原料制备吸附分离材料可以减少对石油资源的依赖,并具有成本低、环境友好和生物相容性好等优点。利用纤维素中的羟基基团,通过交联、接枝、引入无机粒子或与聚合物复合,可以制备出微球和薄膜等不同形态的吸附分离材料,广泛应用于生物医学,废水处理、气体分离等领域。本文结合近五年来国内外纤维素及其复合材料在吸附分离领域的研究近况,从水、油、重金属、气体和有机物的应用进行了综述,总结了纤维素基吸附分离材料的研究尚存在的问题,探讨了今后的研究方向。     

高考填空题压轴题的解题策略及思考

作为独立题型,填空题大多是计算型（尤其是推理计算型）和概念性质运用型的试题,解答时必须按规则进行切实的计算与合乎逻辑的推演和判断,但填空题要是考点多、解题长度较长、影响结论的因素较多等,那么即使做到了最后一步才出错,在得分上却和一窍不通的考生是没有任何差别的,尽管他们在水平上存在很大差异,这正是它的缺点,客观上影响了考试的信度与效度．然而,     

约瑟夫森结(阵列)与谐振器的耦合效应研究

利用一种新的电路模型系统研究了约瑟夫森结(阵列)与谐振器的耦合效应.以结的电压自锁定台阶幅度ΔI为目标值,得到了谐振电路的电阻R、谐振频率fr对耦合的影响规律,并给出了合理解释;以结阵列的相位互锁定强度IL为目标,研究了IL对锁定电压VL的依赖关系,同时,通过相关计算将其与通常电路模型下得到的结果进行了比较.     

嵌入到Fabry-Perot谐振腔的双晶约瑟夫森结阵列的阻抗匹配和相位锁定研究

在He等人所做的嵌入到Fabry-Perot谐振腔中约瑟夫森结阵列的微波辐照研究基础上,提出了同时实现约瑟夫森结阵列阻抗匹配和相位锁定的方法,进行了相关的电磁仿真和数值计算.双晶约瑟夫森结阵列被制作在YSZ双晶基片上,同时被嵌入到Fabry-Perot谐振腔内.通过在基片上制作与结阵列集成的串联馈电半波偶极天线阵,并对其结构进行优化实现了结与天线的匹配,数值计算表明结的辐射效率达到94%;利用天线阵辐射场的特征和对模型合理的设计,使Fabry-Perot谐振腔和基片同时谐振在合适的模式下,从而使结阵列与谐 关键词： 约瑟夫森结阵列 阻抗匹配 相位锁定 Fabry-Perot谐振腔     

S波段低温低噪声放大器的研制

介绍了基于ADS仿真的低噪声放大器的设计与制作方法;重点研究了LNA的直流偏置、稳定性分析、匹配设计、版图制作和调试;提出了源级负反馈和栅极加并联阻抗的方法来实现了电路全频段稳定和低温正常工作。采用ATF-34143制作了中心频率在2.25的低噪声放大器,在77K温度下,该放大器带内输入输出驻波比小于1.2,增益达到23dB,噪声系数为0.24dB。     

Primary result of ^236U measurement with accelerator mass spectrometry at CIAE

The rare isotope ^236U has a half-life of 2.342（3）×107 years, and is produced principally by thermal neutron capture on ^235U. The isotopic atom ratio of ^236U/^238U depends on the integral thermal neutron flux received by the material of interest. ^236U is potentially useful as a ＂fingerprint＂ for indicating the presence of neutron-irradiated uranium usually originating from nuclear activity. By extracting negative molecular ion UO^- from the uranium oxide target, simulating the ^236U^16O^- beam transport with ^238U^16O^- and ^208Pb2^16O^- pilot molecular ion beam, transporting the ^236U-containing ion beam with a high resolution injection magnet analyzer and electrostatic analyzer system, and finally identifying and detecting ^236U with a time-of-flight detector （TOF）, a method for AMS （Accelerator Mass Spectrometry） measurement of ^236U was established on the HI-13 Accelerator AMS system at China Institute of Atomic Energy.     

Primary result of ~(236)U measurement with accelerator mass spectrometry at CIAE

The rare isotope 236U has a half-life of 2.342(3)×107 years,and is produced principally by thermal neutron capture on 235U.The isotopic atom ratio of 236U/238U depends on the integral thermal neutron flux received by the material of interest.236U is potentially useful as a fingerprint for indicating the presence of neutron-irradiated uranium usually originating from nuclear activity.By extracting negative molecular ion UO- from the uranium oxide target,simulating the 236U16O- beam transport with 238U16O- an...     

AMS measurement of In-situ produced cosmogenic 10Be in Loess Quartz in Luochuan

Loess is the most important and the most typical continental classic sediments of Quaternary. So the measurement of In-situ produced cosmogenic ¹⁰Be is expected to be used for the Loess stratigraphic age. But the production rate of In-situ produced cosmogenic ¹⁰Be in Loess quartz is very low. It requires very high sensitivity and accuracy of measurement. This work has measured the concentrations of ¹⁰Be of two layers in Loess section of Luochuan including L8, L9 and the concentrations of ¹⁰Be in (of) blank sample with the HI-13 AMS system at China Insitute of Atomic Energy(CIAE), then calculated the content of ¹⁰Be in loess quartz for each layer. The ratio of ¹⁰Be/⁹Be was found in the range of 10^－13. The background of ¹⁰Be/⁹Be was about 3×10^－14.     

Measurements of 79Se with AMS based on extracting molecular negative ions

A new method for measuring selenium-79 with AMS, which is based on extracting molecular negative ions, is described in this paper. According to the experimental results, the extraction ion form SeO₂^－ could depress the interference of Bromine-79 as much as 5 order levels, that is to say, the background of ⁷⁹Br can be deducted to ⁷⁹Br/Se≈10^－10. By the way, the chemical form of sample and preparation flow was also developed. Finally, three ⁷⁹Se AMS calibration standard samples with theoretical ⁷⁹Se/Se ratios of 5.06×10^－7, 6.87×10^－8, 5.40×10^－10 were obtained and the method of ⁷⁹Se measurement was set up, which actualized transmission and detection of ⁷⁹Se. By using our Bragg curve detector, the two isobars ⁷⁹Br and ⁷⁹Se could be partly identified to a certain extent and ⁷⁹Se can be identified from ⁷⁹Br about 1 order level. AMS measurements of the three calibration standard samples above were performed and good linearity was obtained. The sensitivity of the measurement is (5.16±1.80)×10^－11.