电磁轴承低偏置控制方式的实现

介绍了电磁轴承的基本组成，通过对电磁力的力学方程进行分析，提出了低偏置磁通控制的思想，并从功放的角度出发分析了低偏置电流工作的优点。经过仿真及实验，结果表明，这种方法对于减少功耗损失、获得满意的动态响应和高频动态性能方面是行之有效的。     

Radiative and Thermal Dispersion Effects on Non-Darcy Natural Convection with Lateral Mass Flux for Non-Newtonian Fluid from a Vertical Flat Plate in a Saturated Porous Medium

The problem of natural convective heat transfer for a non-Newtonian fluid from an impermeable vertical plate embedded in a fluid-saturated porous medium has been analyzed. Non-Darcian, radiative and thermal dispersion effects have been considered in the present analysis. The governing boundary layer equations and boundary conditions are cast into a dimensionless form and simplified by using a similarity transformation. The resulting system of equations is solved by using a double shooting Runge–Kutta method. The effect of viscosity index n, the conduction–radiation parameter R, the non-Darcy parameter Gr*, the thermal dispersion parameter Ds and the suction/injection parameter f_w on the fluid velocities, temperatures and the local Nusselt number are discussed.     

Pulsatile flow between permeable beds

Pulsatile flow of a viscous fluid between two permeable beds is analyzed. The flow between and through the permeable beds are governed by the Navier-Stokes equations and Darcy's law, respectively. The velocity field and the volume flux are obtained for several cases and discussed. Further, when the permeability parameter k→0, the results agree with those of Wang (J. Appl. Mech. 38 (1971) 553).     

Analysis and Modeling of the Turbulent Diffusion of Turbulent Kinetic Energy in Natural Convection

Buoyant flows often contain regions with unstable and stable thermal stratification from which counter gradient turbulent fluxes are resulting, e.g. fluxes of heat or of any turbulence quantity. Basing on investigations in meteorology an improvement in the standard gradient-diffusion model for turbulent diffusion of turbulent kinetic energy is discussed. The two closure terms of the turbulent diffusion, the velocity-fluctuation triple correlation and the velocity-pressure fluctuation correlation, are investigated based on Direct Numerical Simulation (DNS) data for an internally heated fluid layer and for Rayleigh–Bénard convection. As a result it is decided to extend the standard gradient-diffusion model for the turbulent energy diffusion by modeling its closure terms separately. Coupling of two models leads to an extended RANS model for the turbulent energy diffusion. The involved closure term, the turbulent diffusion of heat flux, is studied based on its transport equation. This results in a buoyancy-extended version of the Daly and Harlow model. The models for all closure terms and for the turbulent energy diffusion are validated with the help of DNS data for internally heated fluid layers with Prandtl number Pr = 7 and for Rayleigh–Bénard convection with Pr = 0.71. It is found that the buoyancy-extended diffusion model which involves also a transport equation for the variance of the vertical velocity fluctuation gives improved turbulent energy diffusion data for the combined case with local stable and unstable stratification and that it allows for the required counter gradient energy flux.     

受电子束辐照的硬铝靶的喷射冲量耦合系数随能通量的变化规律

采用通光式传感法和直接测量特定时间间隔的探头原理，在闪光２号装置上进行了电子束辐照硬铝靶产生的喷射冲量耦合系数与能通量关系的研究。结果表明:在能通量为１１５～２４０Ｊ／ｃｍ２范围内，喷射冲量和亏损质量面密度都随能通量近似线性变化，而喷射冲量耦合系数随能通量增大而缓慢递增，并趋于一渐近值；硬铝产生喷射冲量的能通量阈值为４０Ｊ／ｃｍ２左右；喷射冲量值为８１～２１８Ｐａｓ，亏损质量面密度为３．１ １０－２～８．６１０－２ｇ／ｃｍ２，喷射冲量耦合系数为０．７０～０．９８Ｐａｓ／（Ｊ／ｃｍ　２）。     

An explicit algebraic Reynolds stress and heat flux model for incompressible turbulence: Part I Non-isothermal flow

Tensor representation theory is used to derive an explicit algebraic model that consists of an explicit algebraic stress model (EASM) and an explicit algebraic heat flux model (EAHFM) for two-dimensional (2-D) incompressible non-isothermal turbulent flows. The representation methodology used for the heat flux vector is adapted from that used for the polynomial representation of the Reynolds stress anisotropy tensor. Since the methodology is based on the formation of invariants from either vector or tensor basis sets, it is possible to derive explicit polynomial vector expansions for the heat flux vector. The resulting EAHFM is necessarily coupled with the turbulent velocity field through an EASM for the Reynolds stress anisotropy. An EASM has previously been derived by Jongen and Gatski [10]. Therefore, it is used in conjunction with the derived EAHFM to form the explicit algebraic model for incompressible 2-D flows. This explicit algebraic model is analyzed and compared with previous formulations including its ability to approximate the commonly accepted value for the turbulent Prandtl number. The effect of pressure-scrambling vector model calibration on predictive performance is also assessed. Finally, the explicit algebraic model is validated against a 2-D homogeneous shear flow with a variety of thermal gradients. Dedicated to the memory of the late Professor Charles G. Speziale of Boston University     

An experimental technique for measuringtransient natural/forced convective heatfluxes in a vertical channel

A series of systematic experiments for measuring transient natural andforced convected heat fluxes in a one-sided heated vertical channel have beenconducted. The total heat input in transient natural and forced experiments iscomposed of four kinds modes: radiative heat loss, conductiveheat lossm, thermal capacity of the plate, and convective heat transfer in thetest channel. In the transient periods, the generalized correlations for estimatingtransient convective heat flux are proposed in natural and forced convectionexperiments. By using the proposed q_c^″ distributions, satisfactory agreementsare achieved between the transient Nu_x predictions and experimentaldata.     

三嵌段两亲性聚乳酸共聚物的合成及其PVDF共混膜的制备

利用原子转移自由基聚合法(ATRP)合成三嵌段两亲性聚乳酸共聚物聚乙烯吡咯烷酮-聚乳酸-聚乙烯吡咯烷酮(PVP-b-PLA b-PVP),然后将其与聚偏氟乙烯(PVDF)进行其混,制备PVP-b-PLA-b-PVP/PVDF共混膜.结果表明:PVDF膜表面致密,膜断面中指状大孔和海绵状孔同时存在,而共混膜表面多孔,指状大孔贯穿整个断面;与PVDF膜相比,共混膜的孔隙率和孔径增大,水通量提高了158.87％,接触角下降了16.70％,抗污染指标下降了64.7％.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

Consistency check on the fundamental and alternative flux operators in loop quantum gravity

There are different constructions of the flux of triad in loop quantum gravity, namely the fundamental and alternative flux operators. In parallel to the consistency check on the two versions of operator by the algebraic calculus in the literature, we check their consistency by the graphical calculus. Our calculation based on the original Brink graphical method is obviously simpler than the algebraic calculation. It turns out that our consistency check fixes the regulating factor κreg of the Ashtekar-Lewandowski volume operator as1/2, which corrects its previous value in the literature.