Application of the photon's intrinsic flux to the 1s‐2p and 2p‐3d excitonic transitions in nanostructures

We have applied our two recent results [depending on its helicity photon carries a quantum flux of ± Φ ₀ = ± hc/e and the quantized magnetic fluxes through the electronic orbits of the Dirac hydrogen atom are given by: Φ (n,l,m_j) = (n‐l‐m_j)Φ₀) ] to the 1s‐2p and 2p‐3d excitonic transitions in nanostructures. It is shown that the flux changes for the non‐zero matrix elements in the 1s‐2p and 2p‐3d excitonic transitions is either ± Φ₀ or zero. The present result supports the previous results stated above. It is also shown that spin flip is possible in the 1s‐2p and 2p‐3d excitonic transitions.     

Comparison of adjustable permanent magnetic field sources

A permanent magnet assembly in which the flux density can be altered by a mechanical operation is often significantly smaller than comparable electromagnets and also requires no electrical power to operate. In this paper five permanent magnet designs in which the magnetic flux density can be altered are analyzed using numerical simulations, and compared based on the generated magnetic flux density in a sample volume and the amount of magnet material used. The designs are the concentric Halbach cylinder, the two half Halbach cylinders, the two linear Halbach arrays and the four and six rod mangle. The concentric Halbach cylinder design is found to be the best performing design, i.e. the design that provides the most magnetic flux density using the least amount of magnet material. A concentric Halbach cylinder has been constructed and the magnetic flux density, the homogeneity and the direction of the magnetic field are measured and compared with numerical simulation and a good agrement is found.     

微型高温超导磁通泵的研制

本文给出了一种用高温超导体制作的微型磁通泵,对其工作原理进行了仔细分析研究.依照设计研制了磁通泵装置,并对其工作性能进行了初步测试.结果表明,该微型高温超导磁通泵有希望为电阻在1μΩ以内的高温超导闭合环路进行供电.切实克服高温超导接头性能不佳、n指数低等缺陷,有助于Bi系等高温超导带材在超导磁体闭环系统的应用.     

A new approach in modeling of constant temperature boundary condition in thermal lattice‐Boltzmann method

The lattice‐Boltzmann method is being applied to a diversity of fluid flow and heat transfer problems nowadays. Because of its microscale nature, strict attention should be paid when introducing macroscopic inputs to the model. One of the challenging issues dealing with macroscale and microscale treatment is the implementation of boundary conditions. In this regard constant‐temperature boundaries are frequently used in energy transfer problems. Such boundaries are simply modeled in Navier–Stokes based solvers, but they are not so harnessed in lattice‐Boltzmann models. One of the problems is that the calculated tangential heat flux is not zero along such boundaries in most of the previous models. In the present paper, a model has been developed, which has the capability of controlling tangential heat flux along the constant‐temperature boundaries. It aims to set the heat flux nearly zero along the boundary in midplane grid schemes. Copyright © 2012 John Wiley & Sons, Ltd.     

Combining the independent pixel and point-spread function approaches to simulate the actinic radiation field in moderately inhomogeneous 3D cloudy media

A fast method is presented for gaining 3D actinic flux density fields, F_act, in clouds employing the Independent Pixel Approximation (IPA) with a parameterized horizontal photon transport to imitate radiative smoothing effects. For 3D clouds the IPA is an efficient method to simulate radiative transfer, but it suffers from the neglect of horizontal photon fluxes leading to significant errors (up to locally 30% in the present study). Consequently, the resulting actinic flux density fields exhibit an unrealistically rough and rugged structure. In this study, the radiative smoothing is approximated by applying a physically based smoothing algorithm to the calculated IPA actinic flux field.     

Towards understanding the critical heat flux for industrial applications

Understanding CHF is of an upmost importance in many industries, especially in the design and operation of boilers, nuclear power plants, cryogenic systems, etc. Due to safety issues related to the nuclear power plants, and the adaptation of CHF as the limiting criterion of power generation, it is important to understand the mechanisms of CHF relevant to nuclear systems operation. Moreover, CHF is expected to occur during transients than steady-state conditions. Therefore, knowledge of transient CHF is of great importance for the safety evaluation of nuclear reactors under transient condition. In this paper, the existing CHF experimental and modeling studies are discussed in order to understand the phenomena leading to CHF. Also, the effect of transient conditions on CHF for nuclear fuels has been evaluated.     

煤矿粉尘影响三种典型荒漠植被生长的高光谱指数研究

以新疆典型露天煤矿准东五彩湾开采区为研究区,选定并测定干旱煤矿区三种典型植物： 梭梭、假木贼和琵琶柴的冠层光谱,分析植被对煤炭粉尘的波谱响应,旨在研究露天煤炭开采引起的煤炭粉尘扩散对植被生长的影响.研究基于植被冠层实测光谱,提取19种常用的植物色素指数和水分指数,通过不同指数同煤炭粉尘降尘量的相关性的研究,探讨植被生长受损的关键参数及对煤炭粉尘影响敏感的指示性植被,为干旱煤矿区植被受损监测提供评价依据。结果表明： 在干旱露天煤矿区植被受到煤炭粉尘污染的过程中,从植被指数的角度可以间接确定,随着煤炭粉尘量的增加,叶绿素以及水分的含量会减少,而类胡萝卜素的含量会增加;植被体内的水分和叶绿素含量对煤炭粉尘量的响应较为敏感;在指示叶绿素(包括叶绿素a、叶绿素b和叶绿素)的指数中色素归一化指数b(PSNDb)敏感性较强;在指示类胡萝卜素的指数中结构不敏感色素指数(SIPI)敏感性较强;在指示水分的指数中植被水分指数(PWI)敏感性较强;三种植物中梭梭对煤炭粉尘量的增加较为敏感。     

Flux Limiter Lattice Boltzmann Scheme Approach to Compressible Flows with Flexible Specific-Heat Ratio and Prandtl Number

We further develop the lattice Boltzmann (LB) model [Physica A 382 (2007) 502] for compressible flows from two aspects. Firstly, we modify the Bhatnagar--Gross-Krook (BGK) collision term in the LB equation, which makes the model suitable for simulating flows with different Prandtl numbers. Secondly, the flux limiter finite difference (FLFD) scheme is employed to calculate the convection term of the LB equation, which makes the unphysical oscillations at
discontinuities be effectively suppressed and the numerical dissipations be significantly diminished. The proposed model is validated by recovering results of some well-known benchmarks, including (i) The thermal Couette flow; (ii) One- and two-dimensional Riemann problems. Good agreements are obtained
between LB results and the exact ones or previously reported solutions. The flexibility, together with the high accuracy of the new model, endows the proposed model considerable potential for tracking some long-standing problems and for investigating nonlinear nonequilibrium complex systems.     

MgF2对Mn4+掺杂锗酸盐红色荧光粉发光的影响

3.5MgO·0.5MgF₂·GeO₂：Mn⁴⁺作为优异热稳定性和良好发光性能的红色荧光粉而被市场应用,然而,该粉体中MgF₂的作用影响机理尚不明晰,阻碍其性能进一步优化和发展。采用高温固相法制备了系列Mn⁴⁺激活的锗酸盐荧光粉,通过对比加入MgF₂、H₃BO₃（助熔剂）,研究了该粉体的结构、形貌、发光性能等变化规律,阐明了MgF₂的发光影响作用。研究表明,加入MgF₂、H₃BO₃和不加任何助熔剂时的样品,其最佳烧结温度分别为1 150、1 250和1 350 ℃,上述温度下发光强度均为最佳值,其中加入MgF₂、H₃BO₃的样品在最佳温度处生成了纯相。MgF₂的添加,一方面同H₃BO₃一样作为助熔剂对生成纯相、提高样品结晶度起了积极的作用;另一方面,通过研究分析,确认F^-离子成功掺杂进入晶格,促使样品生成的晶体结构为Mg₁₄Ge₅（O, F）₂₄。加入MgF₂、H₃BO₃在最佳烧结温度的样品的荧光寿命分别为0.93和0.75 ms。     

Radiation energy flux of Dirac field of static spherically symmetric black holes

By the statistical entropy of the Dirac field of the static spherically symmetric black hole, the result is obtained that the radiation energy flux of the black hole is proportional to the quartic of the temperature of its event horizon. That is, the thermal radiation of the black hole always satisfies the generalised Stenfan--Boltzmann law. The derived generalised Stenfan--Boltzmann coefficient is no longer a constant. When the cut-off distance and the thin film thickness are both fixed, it is a proportional coefficient related to the space--time metric near the event horizon and the average radial effusion velocity of the radiation particles from the thin film. Finally, the radiation energy fluxes and the radiation powers of the Schwarzschild black hole and the Reissner--Nordstrõm black hole are derived, separately.