2-[5-(3-羟基苯甲酰氨基)-1,3,4-噻二唑]基乙酸乙酯的合成

以丙二酸二乙酯为起始原料,经选择性皂化、酸化、氯化、环合和酰胺化反应合成了2-[5-(3-羟基苯甲酰氨基)-1,3,4-噻二唑]基乙酸乙酯(1),总收率37.2%,其结构经1H NMR,13C NMR,IR和LC-MS(ESI)确证。采用正交实验法[L_9(3~4)]优化了酰胺化反应的条件。结果表明:在最优反应条件{n[2-(5-氨基-[1,3,4]-噻二唑)基乙酸乙酯]∶n(三乙胺)∶n(间羟基苯甲酰氯)=1∶2∶3,于20℃反应8 h}下,1收率75.5%。     

Voltammetric Anion Sensors based on Redox‐active Ferrocene‐bearing Macrocyclic Amides

Reactions between 5‐ferrocenylisophthalic dichloride and 1,2‐bis(o‐aminophenoxy)ethane yield 1:1‐ and 2:2‐cyclization products with amide linkages, which are marked as L1 and L2 , respectively. The crystal structure of the 2:2‐macrocycle L2 is determined by X‐ray single crystal structure analysis. Interestingly, L2 affords a folded conformation due to the intermolecular π–π interaction between two isophthaloyl groups, so as to stabilize the marcocylic conformation. The electrochemical anion sensing studies of L1 and L2 show that they have a good ability to recognize H₂PO₄^–, and the 2:2‐cyclization products ( L2 ) with two ferrocene groups, more anion binding sites, and larger cavities, give better electrochemical anion recognition results than L1 .     

Effect of water on the retention on diol and amide columns in hydrophilic interaction liquid chromatography

The amount of water adsorbed on polar columns plays important role in hydrophilic interaction liquid chromatography. It may strongly differ for the individual types of polar columns used in this separation mode. We measured adsorption isotherms of water on an amide and three diol‐bonded stationary phases that differ in the chemistry of the bonded ligands and properties of the silica gel support. We studied the effects of the adsorbed water on the retention of aromatic carboxylic acids, flavonoids, benzoic acid derivatives, nucleic bases, and nucleosides in aqueous‐acetonitrile mobile phases over the full composition range. The graphs of the retention factors versus the volume fraction of water in mobile phase show “U‐profile” characteristic of a dual hydrophilic interaction–reversed phase retention mechanism. The minimum on the graph that marks the changing retention mechanism depends on the amount of adsorbed water. The linear solvation energy relationship model suggests that the retention in the hydrophilic interaction liquid chromatography mode is controlled mainly by proton–donor interactions in the stationary phase, depending on the column type. Finally, the accuracy of hydrophilic interaction liquid chromatography gradient prediction improves for columns that show a high water adsorption.     

Preparation and Application of Solid,Salt‐Stabilized Zinc Amide Enolates with Enhanced Air and Moisture Stability

The treatment of various N‐morpholino amides with TMPZnCl⋅LiCl (TMP=2,2,6,6‐tetramethylpiperidyl) and Mg(OPiv)₂ in THF at 25 °C provides solid zinc enolates with enhanced air and moisture stability (t _1/2 in air: 1–3 h) after solvent evaporation. These enolates undergo Pd‐ and Cu‐catalyzed cross‐couplings with (hetero)aryl bromides as well as allylic and benzylic halides. The arylated N‐morpholino amides were converted into various ketones by LaCl₃⋅2 LiCl mediated acylation with Grignard reagents. The new, solid enolates were used to prepare a potent anti‐breast‐cancer drug candidate in six steps and 23 % overall yield.     

Protein‐Templated Formation of an Inhibitor of the Blood Coagulation Factor Xa through a Background‐Free Amidation Reaction

Protein‐templated reactions enable the target‐guided formation of protein ligands from reactive fragments, ideally with no background reaction. Herein, we investigate the templated formation of amides. A nucleophilic fragment that binds to the coagulation factor Xa was incubated with the protein and thirteen differentially activated dipeptides. The protein induced a non‐catalytic templated reaction for the phenyl and trifluoroethyl esters; the latter was shown to be a completely background‐free reaction. Starting from two fragments with millimolar affinity, a 29 nm superadditive inhibitor of factor Xa was obtained. The fragment ligation reaction was detected with high sensitivity by an enzyme activity assay and by mass spectrometry. The reaction progress and autoinhibition of the templated reaction by the formed ligation product were determined, and the structure of the protein–inhibitor complex was elucidated.     

Transamidation of Amides and Amidation of Esters by Selective N–C(O)/O–C(O) Cleavage Mediated by Air- and Moisture-Stable Half-Sandwich Nickel(II)–NHC Complexes

The formation of amide bonds represents one of the most fundamental processes in organic synthesis. Transition-metal-catalyzed activation of acyclic twisted amides has emerged as an increasingly powerful platform in synthesis. Herein, we report the transamidation of N-activated twisted amides by selective N–C(O) cleavage mediated by air- and moisture-stable half-sandwich Ni(II)–NHC (NHC = N-heterocyclic carbenes) complexes. We demonstrate that the readily available cyclopentadienyl complex, [CpNi(IPr)Cl] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), promotes highly selective transamidation of the N–C(O) bond in twisted N-Boc amides with non-nucleophilic anilines. The reaction provides access to secondary anilides via the non-conventional amide bond-forming pathway. Furthermore, the amidation of activated phenolic and unactivated methyl esters mediated by [CpNi(IPr)Cl] is reported. This study sets the stage for the broad utilization of well-defined, air- and moisture-stable Ni(II)–NHC complexes in catalytic amide bond-forming protocols by unconventional C(acyl)–N and C(acyl)–O bond cleavage reactions.     

Synthesis of 2-Oxazolines from Ring Opening Isomerization of 3-Amido-2-Phenyl Azetidines

Chiral 2-oxazolines are valuable building blocks and famous ligands for asymmetric catalysis. The most common synthesis involves the reaction of an amino alcohol with a carboxylic acid. In this paper, an efficient synthesis of 2-oxazolines has been achieved via the stereospecific isomerization of 3-amido-2-phenyl azetidines. The reactions were studied in the presence of both Brønsted and Lewis acids, and Cu(OTf)₂ was found to be the most effective.     

几种酰胺类化合物作为添加剂对钢—钢和钢—铝摩擦副摩擦学性能的影响

采用四球摩擦磨损试验机和SRV摩擦磨损试验机考察了 4种酰胺化合物对钢 -钢和钢 -铝摩擦副摩擦磨损性能的影响 ,用X射线光电子能谱 (XPS)分析了丙烯酰胺润滑下铝合金磨斑表面元素的化学状态 .结果表明 :对钢 -钢摩擦副 ,酰胺类化合物表现出一定的抗磨减摩作用 ,对钢 -铝摩擦副 ,丙烯酰胺和乙酰胺表现出良好的抗磨减摩性能 .XPS分析结果显示 ,铝合金磨斑表面存在 3种价态的氮的化合物及 2种价态的铝 ,表明其磨损表面生成了复杂的反应膜     

Preparation of Polystyrene-supported N-phenyl-N-acyl Sulfonamide Resin and its Application in Solution-phase Synthesis of Amides

Polystyrene-supported N-phenyl-N-acyl sulfonamide resin was prepared by reacting polystyrene sulfonyl chloride resin with aniline and acylating in pyridine with either acid chlorides or anhydrides. Then, this resin was utilized as a new type of acyl transfer reagent to synthesize the amide library. It was approved to be a more effective acyl transfer reagent with higher amide yields than the polystyrene-supported N-methyl-N-acyl sulfonamide resin and N-benzyl-N-acyl sulfonamide resin. When the phenyl group bonded to the N atom on N-phenyl-N-acyl sulfonamide resin was substituted by the electron withdrawing group or electron donating group, a decreasing amide yield was obtained. N-phenyl-N-acyl sulfonamide resin could be regenerated many times.