Potentiostatic and cyclic voltammetric deposition of nanostructured manganese oxide for supercapacitor applications

Nanostructured manganese oxide was produced by potentiostatic and cyclic voltammetric deposition techniques from aqueous KMnO₄ solutions. Scanning electron microscopy (SEM) and X-ray diffraction were used to study the morphology and crystal structure of the deposited films. The electrochemical properties of deposited films, that obtained by two techniques, were investigated via performing the cyclic voltammetric tests. The results showed the higher specific capacitances of the nanostructured manganese oxide electrodes which have been produced via cyclic voltammetric deposition. The good retention was obtained for all synthesized electrode materials.     

Synthesis of Iridium Oxide Nanotubes by Electrodeposition into Polycarbonate Template: Fabrication of Chromium(III) and Arsenic(III) Electrochemical Sensor

For the first time iridium oxide (IrO₂) nanotubes are synthesized by electrodeposition in a polycarbonate (PC) template. Potential cycling (90 cycles) between 0.0 and 0.9 V is used for the preparation of IrO_x nanotubes onto the PC template with a pore diameter of 100 nm. Field‐emission scanning electron microscopy (FESEM) images show, that IrO₂ nanotubes with uniform diameters of 110±10 nm and an estimated length of 1–3 µm are formed. The electrochemical properties and the electrocatalytic activity of a glassy carbon‐IrO_x nanotube modified electrode toward Cr³⁺ and As³⁺ oxidation are investigated. Finally, the modified electrode is used for micromolar detection of the proposed analytes using differential pulse voltammetry.     

BiPO4/石墨烯光电极的制备及其光电催化性能（英文）

光电催化(PEC)氧化法是一种使用半导体电极材料在光和电的共同作用下处理水中有机污染的有效方法.在PEC工艺中,施加偏压不仅可以利用电催化对有机污染物进行降解,而且在偏压作用下,光生电子-空穴对能够得到有效的分离和传输,从而大大提高了机物污染物的去除速率.尽管PEC技术已经取得了许多重要的突破,但是能量转换效率仍然无法满足实际应用.因此,开发具有优异性能,良好稳定性和低成本的光电极材料是一项具有挑战性的研究工作.本文采用两步电沉积法制备了BiPO4纳米棒/还原氧化石墨烯/FTO复合光电极(BiPO4/r GO/FTO).电镜结果表明,电沉积制得的纳米棒状磷酸铋均匀负载在石墨烯纳米片层表面.采用甲基橙为模型体系,考察了复合光电极的光电催化活性.BiPO4/r GO/FTO复合电极的光电催化降解速率是BiPO4/FTO光电极的2.8倍,显示出优良的光电催化活性.实验进一步研究了工作电压和BiPO4沉积时间对甲基橙光电降解性能的影响.最佳的BiPO4沉积时间为45 min,最佳工作电压为1.2 V.捕获实验和ESR实验表明羟基自由基(·OH)和超氧化物自由基(·O2-)是该电极的主要活性物种.BiPO4/r GO/FTO复合电极经过四次循环实验后其降解甲基橙效率保持不变,显示出高稳定性,采用光电流,交流阻抗及其荧光测试对其光催化机理进行推测.结果表明该复合光电极具有高PEC活性的主要原因是:石墨烯的引入加快了BiPO4的电子空穴的分离,拓宽了石墨烯的可见光吸收范围;同时,石墨烯诱导产生的BiPO4混合相也进一步促进了光生电子空穴的分离,提高了光电降解活性.     

Co3O4纳米片的制备及对H2O2电还原反应的催化性能简

通过恒电势电沉积和加热处理在泡沫镍基体上制备了Co3O4纳米片. 利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)和X射线光电子能谱(XPS)等手段对纳米片的形貌和结构进行了表征. 采用线性伏安扫描和计时电流技术研究了Co3O4纳米片电极对H2O2的电还原性能. 结果表明,在3.0 mol/L KOH 和 0.4 mol/L H2O2溶液中,当电压为-0.4 V(vs. Ag/AgCl)时,线性伏安扫描电流密度达到-0.386 A/cm2,在1000 s 测试时间内,计时电流密度衰减很小,表明Co3O4纳米片电极对H2O2具有很高的活性和稳定性.     

电沉积－退火工艺制备铜铟硒太阳能电池薄膜及表征

利用电沉积硒气氛下后续退火的工艺制备出了高结晶质量的铜铟硒薄膜．通过X射线衍射、扫描电子显微镜、拉曼光谱、紫外-可见-近红外光谱和阻抗谱技术对退火后的铜铟硒薄膜进行表征,结果表明530 oC硒化退火后的铜铟硒薄膜具有四方的黄铜矿晶体结构,晶粒尺寸达到微米量级,光学带隙为0.98 eV,经过KCN溶液去除表面高导电性的铜硒化合物后铜铟硒薄膜的载流子浓度在10¹⁶ cm^-3量级．利用硒化退火的铜铟硒薄膜作为光吸收层制备了结构为AZO/i-ZnO/CdS/CIS/Mo/glass的太阳能电池,在AM1.5光照条件下对其电流-电压特性测试后发现面积为0.2 cm²的电池可以达到0.96％的能量转换效率,并对限制电池效率的原因做出了初步的分析和讨论.     

刚性衬底上铜铟硒纳米棒阵列的合成与表征

在覆盖有钨电极的硅衬底上利用多孔阳极氧化铝模板为生长掩膜电沉积合成垂直排列的铜铟硒纳米棒阵列. 多孔阳极氧化铝模板由阳极氧化磁控溅射制备的铝膜制成. 扫描电子显微镜结果表明,该纳米棒阵列结构致密,直径约100 nm长度约1μm,纵横比为10. X射线衍射、微区拉曼光谱和高分辨透射电子显微镜结果表明,真空条件下450 oC退火处理的铜铟硒纳米棒是多晶纯相的黄铜矿结构的铜铟硒,在纳米棒轴向方向上有比较大的晶粒尺寸. 能量色散X射线光谱表明,铜铟硒纳米棒的化学组成接近InSe₂的化学计量比,由吸收光谱分析推算铜铟硒纳米棒带隙为0.96 eV.     

Spectroelectrochemical Studies on Silicate Sol‐Gel Matrix‐supported Sub‐10 nm Prussian Blue Nanostructures‐based Electrochromic Device

In this study, spectroelectrochemical (SPE) studies to monitor the electrochromic properties of electrochemically synthesized sub‐10 nm sized Prussian blue (PB) nanostructures (NSs) are employed. At the beginning the dark blue coloured device, shifts reversibly between translucent and dark‐blue while applying an applied bias between +1 to ?1 V with an opposite polarization. Amine functionalized silicate sol‐gel matrix (SSG) is used as a solid support and stabilizer for electrodepositing highly uniform sub‐10 nm PB NSs. The SSG's film thickness is suitably optimized through suitable controlled experiments. It is found that the SPE behaviour of sub‐10 nm sized PB NSs, suitably followed a colour modulation of PB into Prussian white (PW) and vice‐versa. SPE studies are used to investigate the redox switching between the PB and PW and which are responsible for an electrochromic function of a fabricated electrochromic device (ECD). Fabricated ECD has demonstrated an optical modulation at 680 nm with the moderate coloration efficiency of 115.8 cm²/C. Present study validates the SPE feature of sub‐10 nm PB NSs as an active electrochromic nanomaterial and demonstrating the applicability of SPE technique to investigate the variety of electrochromic nanomaterials, with consequences in both spectral and electrochemically active nanomaterials for electrochromic device applications.     

Glucose Electro‐oxidation on Graphite Electrode Modified with Nickel/Chromium Nanoparticles

In this study, an available and inexpensive graphite substrate, was easily modified with Ni/Cr nanoparticles via electrodeposition technique in a very short time (3 min) and used as an electrocatalyst for glucose oxidation in alkaline solution. Graphite electrode modified with Ni/Cr nanoparticles demonstrated an outstanding electrocatalytic performance to glucose oxidation in comparison to examined Ni‐based electrodes or even different materials in other reports. It is noteworthy to mention that adding a little Cr led to a synergistic effect with Ni; accordingly, the presence of Cr not only resulted in a greater adsorption of glucose molecules by chromium oxide but also boosted conductivity of the nickel oxide because of the enhancement of Ni(III) amount. The electrochemical studies were performed by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The morphology and structure of catalyst layer was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and energy dispersive x‐ray spectroscopy (EDS). The linear range of the electrode by cyclic voltammetry was between 2–31 mM with a high sensitivity of 2094 μA cm^?2 mM^?1. The repeatability and reproducibility of the proposed electrode was examined in glucose solution which were 0.3 % and 4.7 %, respectively. According to the low cost, ease and fast preparation, good repeatability and high sensitivity, this electrode can be a good candidate for nonenzymatic glucose oxidation.     

The electrochemical preparation and microwave absorption properties of magnetic carbon fibers coated with Fe3O4 films

Electrodeposition was employed to fabricate magnetite (Fe₃O₄) coated carbon fibers (MCCFs). Temperature and fiber surface pretreatment had a significant influence on the composition and morphology of Fe₃O₄ films. Uniform and compact Fe₃O₄ films were fabricated at 75 °C on both nitric acid treated and untreated carbon fibers, while the films prepared at 60 °C were continuous and rough. Microwave measurements of MCCF/paraffin composites (50 wt.% of MCCFs, pretreated carbon fibers as deposition substrates) were carried out in the 2-18 GHz frequency range. MCCFs prepared at 60 °C obtained a much higher loss factor than that prepared at 75 °C. However, the calculation results of reflection loss were very abnormal that MCCFs prepared at 60 °C almost had no absorption property. While MCCFs prepared at 75 °C exhibited a good absorption property and obtained −10 dB and −20 dB refection loss in wide matching thickness ranges (1.0-6.0 mm and 1.7-6.0 mm range, respectively). A secondary attenuation peak could also be observed when the thickness of MCCF/paraffin composite exceeded 4.0 mm. The minimum reflection loss was lower.