Discrete element modelling of large soil deformations under heavy vehicles

This paper addresses the challenges of creating realistic models of soil for simulations of heavy vehicles on weak terrain. We modelled dense soils using the discrete element method with variable parameters for surface friction, normal cohesion, and rolling resistance. To find out what type of soils can be represented, we measured the internal friction and bulk cohesion of over 100 different virtual samples. To test the model, we simulated rut formation from a heavy vehicle with different loads and soil strengths. We conclude that the relevant space of dense frictional and frictional-cohesive soils can be represented and that the model is applicable for simulation of large deformations induced by heavy vehicles on weak terrain.     

Compact ellipse shaped patch with ground slotted broadband monopole patch antenna for head imaging applications

This paper represents an ellipse-shaped patch with a ground slotted broadband patch antenna for microwave head imaging systems. The proposed antenna constructs with a simple ellipse shaped square patch and modified slotted plane. The proposed design is very simple to fabricate and is enclosed in a microwave imaging system. The slotted patch, and the partial ground plane improves the antenna's efficiency, operating frequency range, and gain. The size of the proposed antenna is 70 × 60 × 1.5 mm³ with the electrical dimension being 0.277λ × 0.238λ × 0.006λ at a lower frequency of 1.19 GHz and connected to a 50Ω microstrip feeding line. This antenna is printed onto a low-cost FR-4 substrate whose relative permittivity is 4.4, and whose thickness is 1.5 mm. CST and HFSS software have been used for simulation and thereafter successful completion of the measurements and the fabrication. The comprehensive simulation exhibits that this design provides a bandwidth of 2.37 GHz (1.19 – 3.56 GHz) and 100% of the fractional bandwidths (% BW) with the reflection coefficient of <-10 dB. This antenna on FR-4 can produce an average gain of around 3.63 dBi with 5.95 dBi peak gain at whole operation frequencies. The prototype has a peak radiation efficiency of approximately 97% across the active frequency spectrum with 93% of average. The antenna does have an improved fidelity-factor (> 90 %) with a shorter group-delay. Several design modifications have been performed to get perfect, effective, and suitable results for microwave imaging applications. A 3D-realist Hugo head model is fitted with a single antenna and a 9-antenna array component to verify the performance of both the single antenna, and the configured array antenna. The antenna penetrates the brain human tissues satisfactorily. Across the operational range, the specific absorption rate (SAR) attains a limit of <1 W/kg. The analysis of both numeric and experimental evidence clearly indicates that the suggested antenna is ideal for microwave head-imaging implementations.     

Pyridine solvated dioxouranium complex with salen ligand: Synthesis,characterization and luminescence properties

A new derivative of dioxouranium(VI) salen complex, [UO2(L)(pyridine)], where [L = N,N′-Bis(2-hydroxybenzylidene)-2,2-dimethyl-1,3-propanediamine] is synthesized and characterized by elemental analysis (C, H, N), FT-IR, ESI-MS spectrometry, UV/Vis, fluorescence, ¹H and ¹³C NMR spectroscopy and thermal gravimetric (TG) study. Furthermore, the single crystal X-ray diffraction measurements of the complex were carried out at 100 and 273 K. The crystal structure measurements revealed that the complex has distorted pentagonal bipyramidal geometry with uranium atom located at the centre and bonded to two phenoxy oxygen and two azomethine nitrogen in tetradenate fashion and one nitrogen from pyridine making it seven coordinated. In addition, the photoluminescence property of the complex was also recorded.     

Modeling the drying of ultrasound and glucose pretreated sweet potatoes: The impact on phytochemical and functional groups

The influence of ultrasonic frequency (20 kHz) and glucose pretreatments either alone or in combination on the drying of sweet potato slices (3 mm) using a hot-air dryer at 60 °C was tested to study the kinetics modeling, phytochemicals, antioxidant activities, and functional and textural changes of the final dried product. The results indicated that total phenolic content and total flavonoid content were significantly higher in glucose-pretreated samples while antioxidant activities were higher in ultrasound- and glucose-pretreated samples. For vitamin C, much degradation occurred in the glucose-pretreated samples when compared with the other pretreated samples apart from the control. Enzymatic browning made a minor contribution to the ultrasound/glucose-pretreated samples, while no significant differences were noted in the glucose-pretreated samples. A modified Henderson and Pabis (MHP) model, followed by the two-term and Hii models, fitted best among the 15 selected mathematical models. Fourier Transform Infrared Spectroscopy (FTIR) analysis revealed the presence of glucose, phenols, and flavonols in all samples. Microstructural analysis confirmed the hardness (N) in the final glucose-pretreated samples due to glucose layers and less cell damage.     

Nanoscale detection of faint machinery vibration using the NV center in diamond

We propose a novel method for detection of the faint machinery vibration at the nanometer resolution based on the spin magnetic resonant effect. A suspension magnet acts as a vibration sensor to transfer the vibration signals as the magnetic field fluctuation to excite the spin magnetic resonance. Due to the high sensitivity of the magnetic field of the nitrogen-vacancy center in diamond, the theoretical detection limit of mechanical vibration is as high as 5.7 nm, and the actual measurement resolution reached 12.8 nm, and proved the potential for further improvement to ∼pm resolution. The feasibility of this method is verified by dynamic tests. This method provides a novel approach for the detection of micro-mechanical vibrations.     

Development of a capillary electrophoretic method for determination of plasma clearance of iohexol in dogs and cats

Renal function can be monitored by estimation of the glomerular filtration rate (GFR), for example, through measurement of the plasma clearance of a marker that is freely filtrated through the kidney without reabsorption. It has been proposed that iohexol is the most accurate marker for GFR determination in cats and dogs. However, there is a need for a validated capillary electrophoretic method that covers the concentration range for a full curve clearance estimate of iohexol. In the final method, the plasma samples were protein precipitated and the supernatant was analyzed in a background electrolyte containing borate buffer (0.06 m , pH 10.0). The method developed was proved to be linear (concentration range 18– 2900 mg/L) and had a good precision (e.g. 2.3–2.9% at 88 mg/L) and accuracy (e.g. 101–105% at 88 mg/L). Finally, the method was compared with a previously published and validated HPLC‐UV method by parallel analysis of clinical plasma samples from dogs and cats administered Omnipaque®. This comparison showed excellent agreement between the two methods and no proportional or systematic error was observed. The proposed method is simple and has a low cost per sample, which makes it applicable for routine analysis. Copyright © 2014 John Wiley & Sons, Ltd.