Compact ellipse shaped patch with ground slotted broadband monopole patch antenna for head imaging applications |
| |
| Institution: | 1. Faculty of Computer Science and Engineering, Patuakhali Science and Technology, Patuakhali, Bangladesh;2. Dept. of Physics, University of Chittagong, Chittagong, Bangladesh;3. Dept. of Computer Science and Engineering, Jagannath University, Dhaka, Bangladesh;4. Dept. of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia Selangor, Malaysia |
| |
| Abstract: | This paper represents an ellipse-shaped patch with a ground slotted broadband patch antenna for microwave head imaging systems. The proposed antenna constructs with a simple ellipse shaped square patch and modified slotted plane. The proposed design is very simple to fabricate and is enclosed in a microwave imaging system. The slotted patch, and the partial ground plane improves the antenna's efficiency, operating frequency range, and gain. The size of the proposed antenna is 70 × 60 × 1.5 mm3 with the electrical dimension being 0.277λ × 0.238λ × 0.006λ at a lower frequency of 1.19 GHz and connected to a 50Ω microstrip feeding line. This antenna is printed onto a low-cost FR-4 substrate whose relative permittivity is 4.4, and whose thickness is 1.5 mm. CST and HFSS software have been used for simulation and thereafter successful completion of the measurements and the fabrication. The comprehensive simulation exhibits that this design provides a bandwidth of 2.37 GHz (1.19 – 3.56 GHz) and 100% of the fractional bandwidths (% BW) with the reflection coefficient of <-10 dB. This antenna on FR-4 can produce an average gain of around 3.63 dBi with 5.95 dBi peak gain at whole operation frequencies. The prototype has a peak radiation efficiency of approximately 97% across the active frequency spectrum with 93% of average. The antenna does have an improved fidelity-factor (> 90 %) with a shorter group-delay. Several design modifications have been performed to get perfect, effective, and suitable results for microwave imaging applications. A 3D-realist Hugo head model is fitted with a single antenna and a 9-antenna array component to verify the performance of both the single antenna, and the configured array antenna. The antenna penetrates the brain human tissues satisfactorily. Across the operational range, the specific absorption rate (SAR) attains a limit of <1 W/kg. The analysis of both numeric and experimental evidence clearly indicates that the suggested antenna is ideal for microwave head-imaging implementations. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
