一种基于二氢吩嗪的三维共价有机框架的合成、 结构与表征

二氢吩嗪衍生物由于其独特的氧化还原活性而备受关注. 本文先设计合成了一种含有二氢吩嗪基团的单体5,10-二(4-甲酰基苯基)-5,10-二氢吩嗪(M1), 再采用溶剂热法, 通过亚胺缩合反应制备了一种新型三维共价有机框架(3D COF, 3D-PN-2). 通过粉末X射线衍射(PXRD)、 氮气吸附-脱附、 傅里叶变换红外光谱(FTIR)和固体碳核磁共振波谱(¹³C CP/MAS NMR)等表征方法, 并结合理论模拟对其结构信息进行了研究, 得出3D-PN-2是具有十一重穿插金刚石(dia)拓扑结构的3D COF. 采用扫描电子显微镜(SEM)和透射电子显微镜(TEM)对其形貌进行了表征. 稳定性研究结果表明, 3D-PN-2具有较好的热稳定性和化学稳定性. 通过固体紫外-可见漫反射光谱研究了3D-PN-2的光吸收性能, 结果表明, 其在紫外和可见光区具有较宽的吸收范围(吸收边为 630 nm), 且具有较窄的能带间隙(2.11 eV). 通过循环伏安法研究了其氧化还原性能, 并计算得出其最高占有轨道能级(E_HOMO)为-4.50 eV, 最低空轨道能级(E_LUMO)为-2.39 eV.     

基于扩散强化的Pickering界面生物催化系统构建及CO2矿化过程研究

CO₂的有效利用有助于解决环境和生态问题.碳酸酐酶(CA)等酶分子可精准活化CO₂分子以降低反应能垒,为CO₂的高效和高选择性转化提供了一种有前景的途径.然而,酶离开生物体后易失活,且难以重复利用.目前,包埋型固定化酶是常用且有效的提高酶稳定性与回用率的方法之一,但载体的存在会造成反应物CO₂内扩散阻力增加,降低反应活性.此外,CO₂酶促转化是一个气-液-固三相反应过程,反应体系中CO₂的外扩散性能也需要加强.金属有机骨架(MOFs),特别是咪唑酯骨架(ZIFs),常被用作酶固定化的载体.ZIFs的拓扑结构可被设计成不同形貌,进而通过ZIFs的结构工程来加强分子向其中的内扩散.Pickering乳液是指以固体颗粒代替常规表面活性剂而稳定的乳液.当固体颗粒具有催化活性时,催化剂颗粒会扩大液-液-固或气-液-固三相接触面积,从而有效协调反应物在不同相中的扩散时间.如果酶被用作这些颗粒的活性中心,所制备的Pickering乳液也可能具备类似的特性,可加强底物分子向酶的外扩散.本文选择两种具有不同结构的ZIFs(ZIF-L和ZIF-8),原位包埋CA后形成CA@ZIFs颗粒以稳定Pickeirng乳液.ZIF-L和CA@ZIF-L颗粒显示出独特的二维层状堆叠结构.ZIF-8和CA@ZIF-8颗粒呈棱角清晰的十二面体结构.与CA@ZIF-8颗粒相比,CA@ZIF-L颗粒显示出更大的孔径和更宽的孔径分布,这有助于CO₂从CA@ZIF-L颗粒表面扩散至酶活性中心.利用酶活测试来研究内扩散是否通过结构工程得到了加强,发现CA@ZIF-L颗粒的活性比CA@ZIF-8颗粒高22.3%,推测这是由于CA@ZIF-L颗粒特殊的十字花状结构会缩短CO₂从颗粒表面扩散至酶活性中心的距离.同时,十字花状结构可暴露更多的酶活性位点(CA@ZIF-L颗粒的暴露面积是CA@ZIF-8颗粒的~8倍),从而提升了反应物浓度并显示出更高的催化活性.本文还设计了吸附实验来进一步验证上述假设,发现BSA@ZIF-L颗粒对香豆素的吸附率远高于BSA@ZIF-8颗粒,说明与ZIF-8相比,酶包埋于ZIF-L具有更强的捕获小分子的能力,表明CO₂分子向CA@ZIF-L的扩散速度更快,即CA@ZIF-L的十字花状结构可强化系统的内扩散过程.进一步比较了PIBS和游离多酶体系的催化活性,将CO₂通入每个系统,在反应前20 min,PIBS的pH值下降速度比游离体系快得多,说明PIBS通过在气相和液相间构建更大的界面,缩短了CO₂向CA的扩散距离,从而提高了催化效率,促进了CO₂转化.上述假设也通过扩散动力学的计算得到了验证.为进一步研究PIBS的CO₂矿化能力,本文开展了CaCO₃矿化反应,发现PIBS的CaCO₃产量远高于游离多酶体系,表明构建的PIBS在强化内外扩散方面具有显著优势.最后,评估了PIBS在工业应用中的性能,由CA@ZIF-L和CA@ZIF-8颗粒构建的PIBS显示出较好的可回收性,在第8个循环后,PIBS仍可保持8.9 mg/5 min的CaCO₃产量.综上,PIBS可为CO₂的酶促转化和框架提供一个新方法和新平台.     

Synthesis,Aromaticity, and Application of peri-Pentacenopentacene: Localized Representation of Benzenoid Aromatic Compounds

We report the synthesis and optoelectronic properties of TIPS-peri-pentacenopentacene ( TIPS-PPP ), a vertical extension of TIPS-pentacene ( TIPS-PEN ) and a low-band-gap material with remarkable stability. We found the synthetic conditions to avoid the competition between 1,2- and 1,4-addition of lithium acetylide on the large aromatic dione. The high stability of TIPS-PPP is due to the peri-fusion which increases the aromaticity by generating two localized aromatic sextets that are flanked with 2 diene fragments, similar to two fused-anthracenes. Like TIPS-PEN , TIPS-PPP shows the archetypal 2D brickwall motif in crystals with a larger transfer integral and smaller reorganization energy. The high mobility of up to 1 cm² V^?1 s^?1 was obtained in an organic field-effect transistor fabricated by a wet process. Also, TIPS-PPP was used as a near-infrared (NIR) emitter for NIR organic-light-emitting-diode devices resulting in a high external quantum efficiency at 800 nm.     

A two-point calibration method for quantifying organic binary mixtures using secondary ion mass spectrometry in the presence of matrix effects

Quantification of the composition of binary mixtures in secondary ion mass spectrometry (SIMS) is required in the analyses of technological materials from organic electronics to drug delivery systems. In some instances, it is found that there is a linear dependence between the composition, expressed as a ratio of component volumes, and the secondary ion intensities, expressed as a ratio of intensities of ions from each component. However, this ideal relationship fails in the presence of matrix effects and linearity is observed only over small compositional ranges, particularly in the dilute limits. In this paper, we assess an empirical method, which introduces a power law dependence between the intensity ratio and the volume fraction ratio. A previously published physical model of the organic matrix effect is employed to test the limits of the method and a mixed system of 3,3′-bis(9-carbazolyl) biphenyl and tris(2-phenylpyridinato)iridium (III) is used to demonstrate the method. This paper introduces a two-point calibration, which determines both the exponent in the power law and the sensitivity factor for the conversion of ion intensity ratio into volume fraction ratio. We demonstrate that this provides significantly improved accuracy, compared with a one-point calibration, over a wide compositional range in SIMS quantification and with a weak dependence on matrix effects. Because the method enables the use of clearly identifiable secondary ions for quantitative purposes and mitigates commonly observed matrix effects in organic materials, the two-point calibration method could be of significant benefit to SIMS analysts.     

Interpretation of TOF-SIMS data based on information entropy of spectra

Time-of-flight secondary ion mass spectrometry (TOF-SIMS), when used for the analysis of complex material samples, typically provides data that are complicated and challenging to understand. Therefore, additional data analysis techniques, such as multivariate analysis, are often required to facilitate the interpretation of TOF-SIMS data. In this study, a new method based on the information entropy (Shannon entropy) is proposed as an indicator of the outline characteristics of an unknown sample, such as changes in the material within the sample and mixing conditions. The Shannon entropy values are calculated using the relative intensity of every secondary ion normalized to the total ion count and reflect the diversity of secondary ions in the spectrum. Mixed samples containing two organic electroluminescence materials of different ratios, multilayers of Irganox 1010, and other organic materials were employed to evaluate the utility of Shannon entropy in the analysis of TOF-SIMS data. The findings demonstrate that the Shannon entropy of a spectrum indicates differences in materials and changes in the conditions of a material in a sample without the need for peak identification or the knowledge of specific peaks corresponding to the materials in the sample.     

机械球磨制备三苯胺基PAF-106s及C2烃吸附性质

以三苯胺为单体, 无水三氯化铁为催化剂, 二甲醇缩甲醛为外交联剂, 通过机械球磨不同比例的三苯胺、 三氯化铁和二甲醇缩甲醛, 合成了PAF-106s(PAF-106a~PAF-106c, PAF: porous aromatic framework). 红外光谱、 元素分析、 X射线光电子能谱和固体核磁共振波谱等表征结果证明发生了聚合反应. 氮气吸附结果表明, 三苯胺、 三氯化铁和二甲醇缩甲醛的比例影响PAF-106s的多孔性能. 三氯化铁和三苯胺摩尔比从3∶1增加到12∶1时, PAF-106c的BET比表面积从PAF-106a的135 m²/g增加到280 m²/g. 引入二甲醇缩甲醛后, PAF- 106d~PAF-106g的BET比表面积随三氯化铁和二甲醇缩甲醛摩尔比的增加而逐渐降低. 在273和298 K下, 测试了PAF-106c的C2烃吸附性能, 并采用理想吸附溶液理论计算了C₂H₂/C₂H₄和C₂H₆/C₂H₄分离比.     

Co3O4/UiO-66@α-Al2O3陶瓷膜对VOCs废气的分离催化性能

以α-Al₂O₃为支撑层, UiO-66为分离层, Co₃O₄为催化层, 构建了Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜.对其形貌结构进行了表征, 并研究了其对挥发性有机物(VOCs)的分离催化性能. 结果表明, 该陶瓷膜对喷涂行业废气中苯与吡啶两种主要成分体现出良好的分离性, 透过侧的气体中吡啶与苯的摩尔浓度比值可由给料侧的1提高至17; 体系中引入臭氧后, 给料侧苯的浓度明显降低, 其去除率可达到89%. 透过侧的吡啶去除率仅为27%, 得到了较大程度的保留, 剩余的吡啶经收集后可进行单独的深度处理. Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜在对喷涂行业废气中苯成分高效降解的同时, 能够有效解决喷涂行业废气处理过程中氮氧化物的排放问题, 有望成为喷涂行业废气预处理工艺的理想选择.     

过渡金属催化的1,2,3-三氮唑导向的C—H键官能团化反应研究进展

1,2,3-三氮唑化合物是一类具有重要生理活性的含氮杂环化合物, 其在医药、农药、材料科学等领域都具有广泛的应用. 不断开发基于三氮唑骨架的新型结构, 寻找新型高效的合成三氮唑衍生物的方法具有重要的意义和应用价值. 过渡金属催化的C—H键活化策略具有操作简便、效率高、三废少等优点, 是现代有机合成中高效构筑C—C键和C—X键的强大工具. 近年来, 过渡金属催化的三氮唑导向的C—H官能团化反应受到科学工作者的广泛关注, 该方法以不同结构的1,2,3-三氮唑作为导向基团, 在不同反应条件下通过直接活化C—H键来构建新的C—C键和C—X键, 高效合成复杂的三氮唑衍生物. 综述了近年来1,2,3-三氮唑导向下过渡金属催化的C—H键官能团化反应研究进展, 按照成键类型(碳-碳键、碳-杂键以及环化反应)对这些反应进行了梳理和总结, 并对今后该领域的发展进行了展望.     

Crosslinking Super Yellow to produce super OLEDs: Crosslinking with azides enables improved performance

An increasing number of organic light-emitting diodes (OLEDs) is nowadays based on the use of polymers as the emissive material. For this material class in particular, solution-processing of the OLEDs has gained traction in both research and industry. However, in order to access multilayer material systems, orthogonal solvents must be used to prevent dissolution of previously prepared layers. The use of crosslinkers can facilitate this production method by reducing the number of orthogonal solvents needed since insoluble networks are generated. In this work, a novel bisazide crosslinker is employed to insolubilize Super Yellow, a polyphenylene-vinylene emitter. This allows the use of an additional poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine electron blocking layer (EBL) from the same solvent. Devices including the blocking layer show improved efficacies compared to reference devices without the additional EBL, while also maintaining the emission spectrum. Using the upscalable technique of doctor blading, OLEDs were fabricated which showed a particularly noticeable effect of the blocking layer with a nearly twofold increase in luminance and a 56% increase in current efficacy.     

多组件学习器实现有机分子沸点的精准预测

沸点(BP)是有机分子液体的基本物理化学量, 也是化学工业生产中的重要参数. 有机分子的沸点由分子结构决定, 呈现复杂的结构-沸点关系, 函数法(Function Method)、基团贡献法(Group Contribution Method)等传统方法无法应对复杂多样有机分子结构的预测, 应用范围狭窄, 预测精度低. 本研究中, 我们利用基于人工神经网络(ANN)和支持向量机(SVM)的多组件学习器实现有机分子沸点的精准预测. 我们构建了基于可解释性描述符的ANN、基于相关性描述符的ANN及基于复合分子指纹的SVM三个异质模型, 并通过包含4550个各种类别的有机分子沸点的数据集进行训练得到了三个异质性学习器, 最后集成三个学习器对有机分子沸点进行预测. 相比于传统方法和此前的定量结构性质关系(QSPR)模型, 多组件模型结合了三种模型的优点, 展现出很好的预测精度和泛化能力以及低的过拟合, 实现了对多种类型有机分子的沸点的有效预测.