可溶性聚苯胺的合成及研究

本文报道了可溶性聚苯胺(PAn)的合成方法。通过对比可溶和不可溶PAn的导电性、电化学行为及IR光谱,说明它们的分子链基本结构相同。并测得了PAn在DMF-d_7中的~13C-NMR 谱。     

用CR传输线模型研究涂层/金属体系阻抗谱

根据CR传输线模型和QR电路之间的关系,建立了拟合其初值的计算方法,借助Z-View软件,可求得各元件精确值.根据电容（Ci）和电阻（Ri）随特征频率（f*）的分布,推导了元件相对增量与恒相位角元件（Q）指数参数n的关系. 结果表明, 当n小于0.5时,Ci比Ri增加得更快,从新的角度说明了n的物理意义及其和界面脱层之间的关系.作为应用实例,拟合了不同特征的电化学阻抗谱,分析了有机涂层/金属腐蚀体系阻抗变化的具体过程,区分了点蚀和脱层因素对阻抗谱的影响,从高阻抗体系同时得到了与不同空隙率有关的涂层电容和电阻值,并根据涂层体系的不均匀特征探讨了模型结构的物理意义.     

Determination of Azidothymidine – an Antiproliferative and Virostatic Drug by Square‐Wave Voltammetry

The 3′‐azido‐3′‐deoxythymidine (AZT, Zidovudine) is an antiproliferative and virostatic drug widely used in human immunodeficiency virus type 1 (HIV‐1) infection treatment. With respect to side effects of high doses and a short half‐life of AZT, a fast and simple detection method for this agent could be helpful. The aim of our study was to determine AZT levels in natural samples (urine, serum, whole blood, and cell cultures, such as the HaCaT line of keratinocytes) without their mineralization and/or purification, by means of electrochemical methods using hanging mercury drop electrode (HMDE). On this electrode, AZT undergoes irreversible reduction at the peak potential near E_p?1.1 V (vs. Ag/AgCl/3 M KCl). Reduction AZT signals were measured by cyclic voltammetry (CV), differential pulse voltammetry (DPV), square‐wave voltammetry (SWV), and constant current chronopotentiometric stripping analysis (CPSA). In phosphate buffer (pH 8) the SWV yielded the best AZT signal with the detection limit of 1 nM. The determination of AZT concentration in biological materials is affected by electroactive components, such as proteins and DNA. For monitoring the influence of these compounds, AZT reduction was performed in the presence of 10 μg/mL calf thymus ssDNA and/or 100 μg/mL bovine serum albumin. In these cases, the detection limit increased to 0.25 μM. Also studied was the AZT concentration in keratinocyte cells (HaCaT line) during cell cultivation. It has been shown that the SWV may be considered as a useful tool for the determination of AZT concentration in cell cultures, and for monitoring AZT pharmacokinetics.     

MTT法测定稀土离子对BEL-7402及K562细胞的毒性及增殖毒性

用MTT法测定稀土离子在不同浓度、不同培养液中,与BEL 7402和K562细胞作用不同时间,对细胞的毒性和增殖毒性。结果表明,在含10%小牛血清培养液中,仅个别稀土离子在较高浓度时对BEL 7402细胞增殖有较弱的抑制作用;对于K562细胞,稀土离子在低浓度时对细胞增殖即表现出较强的抑制作用(P<0.05)。当培养液不含小牛血清时,较低浓度的稀土离子即可抑制BEL 7402细胞的增殖(P<0 05)。     

汽车制造商分时租赁模式采用及产品线策略研究

考虑自有平台和第三方平台两种分时租赁方式,将汽车质量划分为性能质量和环境质量,构建销售模式、纯分时租赁模式和混合模式下的产品线策略模型,研究制造商产品线策略与商业模式之间的相互作用。研究发现,同品牌产品间竞争和合并效应是分时租赁模式影响产品线策略的两个关键因素。同品牌产品间竞争的加剧和合并效应的增大都会激励企业选择性能更好的车型而忽略其环境表现。分时租赁模式能同时改进利润与产品环境表现,但存在条件:当消费者价格敏感性较低时,使用成本高且合并效应小是实现同时改进的条件;当消费者价格敏感较高时,使用成本低且合并效应小则是同时改进的条件。     

修正PRP共轭梯度方法求解无约束最优化问题

基于著名的PRP共轭梯度方法,利用CG_DESCENT共轭梯度方法的结构,本文提出了一种求解大规模无约束最优化问题的修正PRP共轭梯度方法。该方法在每一步迭代中均能够产生一个充分下降的搜索方向,且独立于任何线搜索条件。在标准Wolfe线搜索条件下,证明了修正PRP共轭梯度方法的全局收敛性和线性收敛速度。数值结果展示了修正PRP方法对给定的测试问题是非常有效的。     

第II类双边拆卸线平衡问题建模与优化

报废汽车体积大,废弃物污染大,拆卸过程复杂,将作业任务均衡分配难。为此,本文对工作站数量确定的双边拆卸线平衡问题进行研究,建立问题数学模型,设计一种变邻域蛙跳算法。所提算法在寻优过程中采用变邻域搜索提高族群局部搜索效率;引入个体学习机制加快精英个体进化速度;提出基于二分法的节拍时间调整策略加快对最优节拍的搜索。最后,通过算例对算法性能进行验证并通过实例说明任务在拆卸线上平衡分配的重要性。     

关于电子自旋的实验验证和理论思考

本文从斯特恩──盖拉赫实验证实电子具有自旋入手,用电子“自旋──轨道耦合”直观地解释了光谱线精细结构的双重线。     

The effect of interface deformation due to gravity on line tension measurement by the capillary rise in a conical tube

Much research has been done on line tension measurement and interpretation, and attempts have also been made to measure line tension with simple, cheap and reliable methods that do not require excessive sophistication. Of particular interest is the method of determining line tensions of solid–liquid–vapor systems from the capillary rise in a conical tube. This simple and relatively inexpensive method gives line tension values comparable to those reported in the literature obtained via highly sophisticated instruments or techniques such as the well known axisymmetric drop shape analysis technique. The absolute value of line tension obtained using the conical tube method and assuming a spherical liquid–vapor interface is larger but of the same order of magnitude (1 μJ m⁻¹) as that reported in the literature. A theoretical analysis presented herein shows that by including the deformation of the liquid–vapor interface due to gravity in the conical capillary analysis, the line tension value inferred from the experimental data is reduced by approximately 50% and compares better with values in the literature obtained using other sophisticated methods. Thus a relatively simple, cheap, accurate and reliable method of line tension measurement has been advanced.     

Hole Burning and Fluorescence Spectra of Sol-Gel Derived Sm2+-Doped Glasses

Sm2+-doped glasses in the system of Al2O3-SiO2 were prepared by sol-gel processing of metal alkoxides and reacting with H2 gas at 800°C. The hole burning properties of these glasses were investigated. The holes were burned in the 7F0 5D0 line of the Sm2+ ions using a DCM dye laser at 77 K. The hole depth increased with increasing the laser irradiation time, reaching up to 15% of the total intensity within a few hundred seconds. The hole width was 3 cm–1 full width at half maximum. Fluorescence line narrowing spectra of the 5D0 7 F1 transition were analyzed to study the local structure surrounding the Sm2+ ion. It is concluded that the Sm2+ ions are closely coordinated with nine oxygens of the AlO6 group in aluminosilicate glasses and that the addition of Al3+ ions into glass induces an increase in the coordination number of the Sm2+.