高纯氧化镝电感耦合等离子体原子发射光谱法摄谱分析时光谱干扰校正方法的研究

本文建立了高纯氧化镝样品ICP摄谱分析时干扰系数法校正光谱干扰的方法。测定了镝基体对14种稀土杂质元素20条灵敏分析线的干扰系数(KCT)。并有效地校正了镝基体造成的光谱干扰,获得满意的结果。     

毛细管电泳-激光干涉检测法测定饮料中蔗糖含量

本文将毛细管电泳-激光干涉检测法用于饮料中蔗糖的定量测定.结果表明,在样品浓度低于10mg/mL时,检测信号与样品浓度成正比.样品不需衍生化处理直接进行测定,分析结果较为满意.     

Radiation: Waves or particles? A quantized approach to time

A fundamental difficulty in theoretical physics is the dual and apparently incompatible interpretations of radiation as showing both continuous and extensive wave properties but also those of discrete atomic or smaller individual particles. Some of these contradictions are outlined. The explanation offered is of a quantized nature of time; units t_o=h/m_oc² for a particle at rest, and of similar interval unit s_o when in relative motion, with conventional relativistic corrections.

For many purposes this form of quantization replaces the need for a wave concept which then appears as a mathematical approach, chosen to avoid the physical concept of an intrinsicc time for any particle, just as we have for its intrinsic mass, spin and electrical charge. t_o and s_o are directly related to its frequency, energy and mass. The uncertainty principle and interference relations follow directly from this model, without any physical wave concept.     

Resolving the copper interference effect on the stripping chronopotentiometric response of lead(II) obtained at bismuth film screen-printed electrode

As copper(II) is a common ion in a variety of analytical samples, its effect on the stripping response of lead(II) at bismuth film screen-printed carbon electrode (BFSPCE) was investigated. The study was conducted using a screen-printed three-electrode system (working, counter and reference electrodes), with the carbon-working electrode plated in situ with bismuth film. Copper present at significant concentration level in samples was found to affect the sensitivity of the electrode by reducing the constant current stripping chronopotentiometric (CCSCP) response of lead(II). Recovery of the lead stripping response at the BFSPCE in the presence of copper was obtained when 0.1 mM ferricyanide was added to the test solution. The ferricyanide added circumvents the detrimental effect of copper(II) by selectively masking the copper ions by forming a complex. The analytical utility of the procedure is illustrated by the stripping chronopotentiometric determinations of lead(II) in soil extracts.     

Removal of humic matter interference in the determination of Cr(VI) in soil extracts by the diphenylcarbazide method

Alkaline digestion of soil samples, which is recommended for minimizing Cr(III)–Cr(VI) interconversions during the extraction of Cr(VI), may also solubilize humic matter (HM). The latter is responsible for both positive and negative interference in the analysis of Cr(VI) in the extract by the diphenylcarbazide (DPC) method. Humic compounds indeed absorb light at 540 nm as the Cr-DPC product and are also able to rapidly reduce Cr(VI) under the pH conditions of the standard DPC method. To prevent any risk of interference and make the DPC method applicable to soil extracts, a new protocol is proposed. This consists of three successive steps: (1) extraction of Cr(VI) by the U.S.EPA method 3060A in the presence of Mg²⁺; (2) batch removal of solubilised HM by the XAD-7 sorbent at pH 3.0 ± 0.1 with 3–5 min contact time; (3) analysis of Cr(VI) with the DPC method at pH 3.0 ± 0.1. The application of this new protocol to the soil product SQC-012 Lot 4 certified by R.T. Corporation (RTC, USA) gave significantly lower Cr(VI) concentrations and smaller variability compared to certified values (46.5 ± 2.3 instead of 153 ± 32.6 mg/kg). The new protocol was validated by Cr(VI) and Cr(III) spikes either to the soil/extractant suspension or to the exctract. Cr(VI) results in the wide range of acceptance limits (104–202 mg/kg) reported by RTC were only obtained when the U.S.EPA method 3060A without the addition of Mg²⁺ and DPC analysis at pH 1.0 were applied. The latter procedure appears questionable since it leads to largely variable results which reflect the complex role played by humic matter in the determination of Cr(VI) and the instability of Cr(III) during the extraction.     

ICP－AES中内标法的应用研究 Ⅲ．用内标法校正基体干扰

通过观测基体对分析元素发射强度的干扰情况，分析干扰机制，从而确定用来校正基体干扰的内标元素与分析元素的匹配条件。实验结果表明，只要选择合适的内标元素，可以校正基体干扰。     

Correction of iron interface in the spectrophotometric flow injection catalytic determination of molybdenum in plants

Iron interference in the spectrophotometric catalytic determination of molybdenum based on the iodide-hydrogen peroxide reaction can be corrected by using sulphosalicylic acid as masking and color-forming reagent. The catalytic influence of iron ions is circumvented to the extent of about 90% and correction of any remaining iron ions is possible by monitoring the colored iron(III)-salicylate complex at 490 nm. In this way, iron is also determined. With the proposed system, molybdenum can be determined in plant and food digests within the 0–100 μg Mo 1⁻¹ range in the presence of up to 25 mg Fe 1⁻¹, at a sampling rate of about 50 determinations h⁻¹. The relative standard deviation of 10 consecutive measurements was estimated as < 2%. Results for samples were comparable with those obtained by graphite furnace atomic absorption spectrometry. In addition, recoveries within the range 94–100% were calculated.     

Spectral and non-spectral interferences in inductively coupled plasma mass-spectrometry

Inductively coupled plasma mass spectrometry of environmental and biological samples is often hampered by spectral and non-spectral interferences. Spectral interferences, caused by the limited resolution of the quadrupole mass spectrometer, can be eliminated in a variety of ways. For their identification inspection of a signal versus carrier gas flowrate is useful. Anion exchange allows the removal of most S and Cl containing compounds, which are at the origin of the majority of spectral interferences. Matrix modification, for example the addition of ethanol and subsequent optimization of the gas flow rates in a number of cases enables the reduction of the interferences to insignificant values. Often a mathematical correction based on isotopic signal ratios can be applied. Non-spectral interferences can be divided in reversible, that is occurring while the sample is being measured, and irreversible matrix effects, that is clogging of the nebulizer and sampling orifices or deposition on the torch or in the ion lens stack. The errors associated with non-spectral interferences can be eliminated by appropriate calibration procedures, adapted sample preparation or limitation of the amount of sample delivered to nebulizer, plasma and sampling devices, for example by the application of flow injection. Applications of all the elimination procedures are described for the analysis of sea-water, estuarine water, soil and sewage extracts, percolate water, urine, serum and wine.     

Potential energy surfaces and nonadiabatic transitions in the asymptotic regions of ICN photodissociation to study the interference effects in the F1 and F2 spin-rotation levels of the CN products

One of the most spectacular yet unsolved problems for the ICN -band photodissociation is the non-statistical spin-rotation F₁ = N + 1/2 and F₂ = N − 1/2 populations for each rotation level N of the CN fragment. The F₁/F₂ population difference function f(N) exhibits strong N and λ dependences with an oscillatory behavior. Such details were found to critically depend on the number of open-channel product states, namely, whether both I (²P_3/2) and I (²P_1/2) are energetically available or not as the dissociation partner. First, in the asymptotic region, the exchange and dipole-quadrupole inter-fragment interactions were studied in detail. Then, as the diabatic basis, we took the appropriate symmetry adapted products of the electronic and rotational wavefunctions for the F₁ and F₂ levels at the dissociation limits. We found that the adiabatic Hamiltonian exhibits Rosen–Zener–Demkov type nonadiabatic transitions reflecting the switch between the exchange interaction and the small but finite spin-rotation interaction within CN at the asymptotic region. This non-crossing type nonadiabatic transition occurs with the probability 1/2, that is, at the diabatic limit through a sudden switch of the quantization axis for CN spin S from the dissociation axis to the CN rotation axis N . We have derived semiclassical formulae for f(N) and the orientation parameters with a two-state model including the 3A′ and 4A′ electronic states, and with a four-state model including the 3A′ through 6A′ electronic states. These two kinds of interfering models explain general features of the F₁ and F₂ level populations observed by Zare's group and Hall's group, respectively. © 2018 Wiley Periodicals, Inc.     

高纯氧化钇中镧、铈、钐、铝、铅和铜的电感耦合等离子体原子发射光谱法测定

本文以纯Y_2O_3中杂质元素的ICP-AES测定为例,研究用数值微分技术解决光谱干扰同题。结果表明,导数光谱法不仅可以有效地消除来自基体的光谱干扰,还能减小谱线干扰对检测能力的影响。当分析物浓度较低时,导数光谱法的加入回收率明显优于离峰分析法,多数情况下也优于在峰法校正光谱干扰时的回收率。