烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.     

Effects of Cathode and Anode on Deposition of Trimethylsilane in Glow Discharge

DC cathodic polymerization of trimethylsilane (TMS) was carried out in plasma reactors with and without using anode assembly. In DC cathodic polymerization, the TMS plasma polymers are mainly deposited on the cathode (substrate) surface. As a result, fast deposition of TMS plasma polymers was easily achieved in DC cathodic polymerization as compared with AF or RF plasma polymerization. DC cathodic polymerization without using anode assembly has its advantageous features that the size and number of substrates (as cathodes) are not restricted by the size and the location of anode assembly. It was found that the maximum deposition rate on the cathode surfaces was obtained without anode assembly. The DC cathodic polymerization of TMS was conducted also in a large volume reactor with multiple cathodes (substrates). The same deposition mechanisms for DC cathodic polymerization with a single cathode also apply to the multiple cathodes. Uniform deposition on each cathode could be obtained with appropriate spacing of multiple cathodes and by adjusting the operational parameters, which are based on the current density and the system pressure.     

氧化锌薄膜的电化学沉积和表征

以透明导电玻璃(TCO)为衬底，用硝酸锌水溶液作为电解液，研究了阴极还原沉积ZnO薄膜的反应机理和电化学行为. 通过改变工艺条件来控制ZnO的生长速率， 得到了粒径为10～15 nm的纳米ZnO薄膜. XRD分析显示纳米ZnO薄膜纯度高， 呈纤锌矿结构. 光学测试结果表明，在可见光区其透光度高达90%，禁带宽度为3.37 eV.     

Determination of dissolved manganese in natural waters by differential pulse cathodic stripping voltammetry

A procedure based on differential pulse cathodic stripping voltammetry on the graphite electrode is described for the determination of dissolved manganese in natural waters buffered at pH about 6.5 with acetate solution. In order to avoid interference of iron(II) the addition of fluoride is used. The limit of detection is 3 g/l for a deposition time of 6 min. Acidification and UV-irradiation are recommended for samples containing dissolved organic matter. Results of manganese determination in table mineral waters are reported and the possibility of manganese speciation is discussed.     

普鲁士蓝薄膜的电积法制备及其化学组成

在金属和石墨基底电极上用恒电位沉积法制备出普鲁士蓝(PB)薄膜,研究了影响膜生长的多种因素;观察到PB膜的电化学活性。用红外光谱及电子能谱对膜的化学组成作了分析,结果表明,最初制备的膜为不溶性PB:Fe_4[Fe(CN)_6]_3,在含K~+的电解质溶液中经电化学反应后膜部分转变为可溶性PB:KFeFe(CN)_6,由此确定了PB膜的电化学反应式。     

Accounting for the Adsorption of Anions When Interpreting the Mechanism of Electrodeposition of Metals from Complex Electrolytes: The Reaction Order by the Electrochemically Active Ion

The relationship between the current and the bulk concentration of complex ions during concurrent specific adsorption of an electrochemically active complex ion and a complexing ligand is considered. The effect of parameters that characterize adsorption of such ions and the structure of the electrical double layer on this relationship is analyzed.__________Translated from Elektrokhimiya, Vol. 41, No. 7, 2005, pp. 817–822.Original Russian Text Copyright © 2005 by Rogozhnikov.     

导数阴极溶出方波伏安法测定卡那霉素注射液含量

研究了汞 卡那霉素络合物的电化学行为 ,并建立了导数阴极溶出方波伏安法测定卡那霉素注射液含量的方法。在 pH 4 .7的HOAc NaOAc缓冲溶液中 ,在约 0 .12 6V (vs.SCE)处出现一个汞 卡那霉素络合物的还原峰 ,卡那霉素的浓度在 0 .0 2～ 1.5mg·ml- 1之间与导数方波伏安图的峰高存在良好的线性关系 ,回归方程ip(10 - 4A) =3.6C(mg·ml- 1) + 0 .4 6 ,相关系数为 0 .992 0。方法简便、灵敏、准确 ,可用于卡那霉素注射液含量测定     

硫代乙酰胺体系电沉积法制备CdS纳米膜

The film of surface active agents spread out on the surface of the electrolyte of Thioacetamide and cadmium chloride. CdS nanofilm was deposited at the interface of surface active agents and electrolyt by the method of electrodeposition. The optimal conditions on which the nanofilm was prepared of the least crystals and uniform particles could be attained via analytical results of L₁₆(4⁵) orthogonal experiments. The optimal conditions: castor oil/hexadecanoll 0.06 mL·cm^-2，CdCl₂/CH₃CSNH₂ 4 mmol·L^-1, cell voltage 5 V, electrodeposition temperature 15 ℃. The effects on the grain size of temperature, surface-active agent, electrodyte concentration, cell voltage and pH become smaller in the series. If the temperature was high, the movement of molecules of surface-active agent and electrodyte would be faster, thus the preparation of the film would be difficult. The grain size of thinfilm varied with the surface-active agents, however, when the amount of surface-active agents reached a certain value, the grain size would remain unchanged. The higher the electrodyte concentration, the larger the grain size of nanofilm. The surface forms were changed at the same time. If the pH of the electrodyte was higher or lower, nanofilm could not be prepared successfully, thus the pH range should be is 3～6. SEM image of the nanofilm shows the occurance of dendrite. The sucessful preparation of nanofilm is closely related to the nature of surface activre agent due to the nanofilm growth mechanism.     

Selenium speciation in foods: Preliminary results on potatoes

The present paper deals with the speciation of selenium in potatoes (enriched or not in selenium). The study was carried out by using differential pulse cathodic stripping voltammetry (DPCSV) for quantifying selenium. Results obtained provide evidence that the selenium content in the protein fraction is rather independent from the selenium added to the plants during their growth. On the contrary, the amount of Se in the non-protein fraction (water and starch) in Se-enriched sample is significantly higher than in non-enriched one, suggesting that it is the main selenium-storing site. In this fraction the Se(VI)/Se(IV) ratio seems independent from selenium application but it may be related to the redox conditions. The accumulation of selenium in the non-protein fraction is tentatively ascribed to the “Se–starch interaction” that should be able to modulate both the Se absorption into proteins and, possibly, its toxic effect for the plant itself.