Composition and spectral studies of polyaniline salts

Five different polyaniline salts have been prepared by chemical polymerization of aniline in aqueous solution of different acids. The polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Electron paramagnetic, electronic absorption, infrared spectral and conductivity measurements have been performed on the polyaniline salts and polyaniline bases. This composition and the extent of dopant in polyaniline salt systems have been determined. There is no definite correlation between the conductivity and the stoichiometric ratio between the polyaniline base and the acid, and also the spin concentration.     

Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

Total Synthesis of Several 8, 8",-Biflavones

8,8"-Biflavonoidsareantw0rtantclass0fbiflavonoids.Asasystematicresearchofthe8,8"-biflav0noids,wehavepreviouslyreportedthestudyonthereactionof2'-hydroxychaloneswithl2-H2SO4-DMSOsystem.'InthispaPer,thesynthesisof5,5",7,7',-tetTameth0xy-8,8"-biflavonela2,4,4",7,7"-tetramethoxy-8,8"-biflavone1b',4',4",,5,5,',7,7"-hexamethoxy-8,8"-biflav0ne1c4and4,4"-dibenZyl0xy-5,5",7,7"-tetramothoxy-8,8"-biflavoneldisreported.ThesyntheticmethodisshownintheSchemebelow.2-Hydroxyacet0phenonescondensedwithsubsti…     

Dirhodium(II)-catalyzed carbonyl ylide generation. Stereoelectronic control in dioxolane formation

The combination of ethyl diazoacetate with aryl aldehydes in the presence of copper(I) or rhodium(II) catalysts results in the formation of 1,3-dioxolane products in moderate to good yields. These reactions occur through a pathway that involves ylide intermediates. Catalyst-dependent diastereocontrol is observed and suggests that metal-associated ylides are involved in the product-determining step. The influence of aryl aldehyde substituents has been determined. Current address. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 961–965, May, 1998.     

Synthesis and properties of novel dialkylaminocarbenium salts

Novel dialkylaminocarbenium salts with metallocomplex counter ions were prepared by the reaction of phosgene with either DMF or tetramethylurea in the presence of metal chlorides. Reactions of organosilicon amides with phosgene gave corresponding carbenium salts, while organosilicon ureas yielded aminoiminocarbenium salts. Dialkylaminochlorocarbenium salts were reduced with hydrosilanes to give dialkylaminocarbenium, salts and can be easily hydrolyzed to afford either amides or ureas. Pathways of the reaction with water and alcohols depend on the nature of reagent and the reaction conditions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1035–1040, May 1997.     

C(2×2)S/Fe(001)吸附体系的SCF-Xa-MS研究

采用SCF-X_α-MS方法, 对于C(2×2)S/Fe(001)吸附体系, 选择Fe_5S和Fe_9S两种原子簇模型, 研究了该吸附体系的电子结构、吸附成键特征及其相互作用图象。结果表明, S吸附于Fe(001)单晶表面具有较强的定域性质, S原子与底物Fe原子之间的吸附相互作用主要表现为S(3p)-Fe(4s,3d)之间的轨道相互作用。通过对表面吸附键长的优化, 其结果与X.S.Zhang等的ARPEFS的实验结果一致。     

Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

ToF‐SIMS studies of the oxidation of Fe by D2O vapour: comparison with XPS

The oxidation of iron (Fe) by water (D₂O) vapour at low pressures and room temperature was investigated using time‐of‐flight (ToF) SIMS. The results supported those found previously using XPS and the QUASES^? program in that a duplex oxide structure was found containing a thin outer surface hydroxide (Fe(OD)₂) layer over an inner oxide (FeO) layer. The extraordinary depth resolution of the ToF‐SIMS profiles assisted in identifying the two phases; this resolution was achieved by compensation for surface roughness. A substantial concentration of deuterium was found in the subsurface oxide layer. This observation confirmed previous assessments that the formation of FeO was from the reaction of Fe(OD)₂ with outward‐diffusing Fe, leaving deuterium as a reaction product. Copyright © 2005 John Wiley & Sons, Ltd.     

A new strategy for the synthesis of α,β-diaroylpropionates promoted by samarium metal in DMF

When promoted by samarium in DMF, aroyl chlorides react readily with acrylates to afford α,β-diaroylpropionates in good to excellent yields without pretreating or activating the metallic samarium.     

Density and Speed of Sound for Binary Mixtures of a Cyclic Ether with a Butanol Isomer

Densities and speeds of sound of the binary mixtures 1,3-dioxolane + 1-butanol, 1,3-dioxolane + 2-butanol, 1,4-dioxane + 1-butanol, and 1,4-dioxane + 2-butanol have been measured at 25 and 40°C. The excess molar volumes and excess isentropic compressibility coefficients were calculated from experimental data and fitted to a Redlich–Kister polynomial function. Results were analyzed in terms of molecular interactions and compared with literature data.