NETWORK CROWN ETHER POLYMERS WITH CENTRIC FUNCTIONAL GROUP (Ⅳ) SYNTHESIS OF NETWORK CROWN ETHER POLYMER WITH PENDANT DIETHYLAMINO THIAALKYL GROUP AND ITS PLATINUM COMPLEX*

The title polymer was prepared from 5-diethylamino-3-thia-pentyl glycidyl ether anddiethylene glycol bisglycidyl ether via ring-opening copolymerization. It was found that thisreaction could be catalyzed by sodium, but not Lewis acid. The obtained polymer can coordinatewith platinum compound, and the platinum complex is a new kind of catalyst for thehydrosilylation of olefins with triethoxysilane.     

丙烯酸酯接枝炭黑无皂水性涂料的性能研究

旋转粘度计研究了丙烯酸酯接枝炭黑无皂水性涂料的流变性能，并考察了着色涂料的冻融及贮存稳定性。接枝炭黑争散于无皂水性涂料中形成的着色涂料具有良好的综合性能。     

金在微电极上的电沉积研究

本工作利用微循环伏安法和阶跃电位法研究在ＡｕＣｌ３的酸性溶液中金在玻碳和铂微电极上的电沉积行为。结果表明，金在微电极上成核所需的过电位较高，但成核几率也高，在所研究的微电极尺寸范围内，金可形成大量的临界单核，且核的生长速率很快。铂微电极上金电沉积的Ｉ－ｔ曲线符合连续成核的模式。     

Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes

A highly sensitive immunosensor based on immobilization of hepatitis B surface antibody (HBsAb) on platinum electrode (Pt) modified silver colloids and polyvinyl butyral (PVB) as matrixes has been developed for potentiometric immunoanalysis to detect hepatitis B surface antigen (HBsAg) in this study. HBsAb molecules were immobilized successfully on nanometer‐sized silver colloid particles associated with polyvinyl butyral on a platinum electrode surface. The modification procedure was electrochemically monitored by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The HBsAb‐silver‐PVB‐modified electrode exhibited direct electrochemical behavior toward HBsAg. The factors influencing the performance of the resulting immunosensor were studied in detail. More than 94.7% of the results of human serum samples obtained by this method were in agreement with those obtained by enzyme‐linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited a sigmoid curve with log HBsAg concentration, high sensitivity (39.8 mV/decade), wide linear range from 16.0 to 800 ng mL^?1 with a detection limit of 3.6 ng mL^?1, fast potentiometric response (<3 min) and long‐term stability (>4 months). The response mechanism of the immunosensors was also studied with AC impedance techniques.     

Separation of isomers of saturated polycyclic hydrocarbons in packed capillary columns with graphitized thermal carbon black

Summary Using the example of perhydrophenanthrene, perhydroanthracene and cyclopentanodecalin isomers a possibility is shown to use packed capillary columns containing graphitized thermal carbon black for a complete separation of high-boiling mixtures of polycyclic saturated hydrocarbon isomers in accordance with the geometric structure of their molecules.     

高负载率纳米Pt-Ru/C催化剂的制备和表征

以Vulcan XC-72R碳黑为载体, 通过在含十二烷基硫酸钠(SDS)的乙二醇溶液中直接还原氯铂酸和三氯化钌, 制备了负载率为60%的纳米PtRu/C催化剂. 透射电镜(TEM)和X射线衍射(XRD)分析结果表明, SDS的加入可显著改善PtRu纳米颗粒在载体表面分散性, 平均粒径达到2.7 nm. 电化学循环伏安法(CV)测试的结果显示, 利用这种方法制备的纳米PtRu/C催化剂对于甲醇氧化具有较强的抗中毒能力和较高的电催化活性.     

Asymmetric Reductive Alkylation of Alanylproline by the Ethyl Esters of 4-Substituted 2-Oxobutenoic Acids

A method was developed for the synthesis of N-[1-(S)-(ethoxycarbonyl)-3-phenylpropyl]alanylproline (enalapril) by reductive alkylation of alanylproline with ethyl 2-oxo-4-phenylbutenoate under the conditions of hydrogenation in the presence of palladium black and 1.6% Pd/C. The yield of enalapril amounted to 65%. With the ethyl ester of the -oxo acid the diastereoselectivity of formation of the S,S,S-diastereomer was higher than with the saturated synthon. It is assumed that with ethyl 2-oxo-4-phenylbutenoate as synthon a conformationally restricted surface complex is formed between the unsaturated synthon and the active centers of the catalyst. During reductive alkylation of alanylproline by ethyl 2-oxo-4-(2-thienyl)butenoate poisoning of the catalyst occurs.     

Ein neues Erdalkalimetall-Oxoplatinat-Cuprat Ca3,5Cu0,5PtO6

A new Alkaline-Earth Platinum Copper Oxide: Ca_3.5Cu_0.5PtO₆ Ca_3.5Cu_0.5PtO₆ was prepared and investigated by single crystal X-ray work. (Space group C? C12/m1; a = 9.0743; b = 9.2527; c = 6.4840 Å; β = 91.448°; Z = 4). The crystal structure of the previously unknown compound is closely related to the structure of Sr₃PtCuO₆ and Sr₃IrCuO₆ as well as the rhombohedral phases M₄PtO₆ (M = Ba, Sr, Ca). Typical features of the crystal chemistry are isolated chains of PtO₆ octahedra, alternately allyed by square CuO₄ polygones and trigonal prisms of O^2? around Ca²⁺.     

Electroless preparation and electrochemical behavior of a platinum-doped nickel hexacyanoferrate film–zinc modified electrode: catalytic ability of the electrode for electrooxidation of methanol

The use of a zinc substrate as an electrode and the modification of its surface by means of a thin film of platinum-doped nickel hexacyanoferrate (Pt-NiHCF) were developed. The modification conditions of the zinc surface including the electroless deposition of metallic nickel on the electrode surface from NiCl₂ solution, chemical derivatization of the deposited nickel to the NiHCF film in 0.5 M K₃[Fe(CN)₆] solution, and electrochemical penetration of metallic platinum into the modified film are described. The modified zinc electrodes prepared under optimum conditions show a well-defined redox couple due to the [Ni^IIFe^III/II(CN)₆]^1–/2– system. The effects of pH, the alkali metal cation, and the anion of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied in detail. The diffusion coefficients of hydrated alkali metal cations in the film (D), the transfer coefficient (), and the transfer rate constant for the electron (k_s) were calculated in the presence of some alkali metal cations. The electrocatalytic activity of the modified electrode for methanol oxidation was demonstrated. The stability of the modified electrode under various experimental conditions was investigated.     

活性炭纤维电极电解法处理墨绿B染料废水

将铁丝缠绕在活性炭纤维(简称ACF)上制成电极,并在阴极鼓入空气,用电解生成的Fenton试剂处理墨绿B染料模拟废水.研究了电压、pH值、温度、空气流量、支持电解质的浓度等因素对染料脱色率的影响.结果表明,pH值越低,温度越高,处理效果越好,气流量的改变对于处理效果影响不大.室温时处理浓度为50mg·L-1的活性染料墨绿B,在实验电压为11V,中性条件下,无水硫酸钠的浓度为20g·L-1,通入空气流量为60L·min-1时,处理60min,色度去除率达到95%左右.55℃时,电解30min色度去除率就达到96%,60min时达到100%.