近紫外LED用绿色荧光粉Ba0.11Sr2.89-2x-2yCexTbyNax+yAlO4F发光特性及Ce3+→Tb3+之间能量传递

高温固相法合成Ba0.11Sr2.89-2x-2yCexTbyNax+yAlO4F荧光粉,并用X射线衍射(XRD)、荧光光谱(PL)测定分析了其晶体结构及光谱性质。结果表明:当Tb3+掺杂量x=0.07时,发光强度最高,发射主峰位于545 nm,并进一步研究了Ce3+,Tb3+共掺的样品中Ce3+→Tb3+能量传递过程。其次,测试由近紫外LED(~380 nm)和三基色荧光粉(Ba0.11Sr2.89Ce0.01Tb0.07Na0.08AlO4F,BAM and Sr2Si5N8:Eu2+)封装的白光LED光电性能,其色品坐标(x=0.3223,y=0.3408),色温5500 K,显色指数为86.26。因此,Ba0.11Sr2.89-2x-2yCexTbyNax+yAlO4F可作为一种潜在的适用于近紫外LED激发的荧光材料。     

SnO_2/石墨纳米片复合电极及其在超级电容器中的应用

在电场的作用下对石墨棒进行电化学剥离,使其表面形成相互平行排列,且垂直于石墨棒基底的二维(2D)石墨纳米片阵列(GNSA).然后通过阴极还原电沉积法制备Sn O2/石墨纳米片阵列(Sn O2/GNSA)复合电极.采用场发射扫描电镜(FE-SEM)、X射线衍射(XRD)和傅里叶变换红外(FT-IR)光谱对其形貌和结构进行了表征.电化学测试表明该复合电极具有优异的超电容性能,在0.5 mol·L-1Li NO3电解质中,扫描速率为5 m V·s-1,电位窗口为1.4 V时,比电容达4015 F·m-2.由Sn O2/GNSA复合电极和相同电解质组装成的对称型超级电容器,在扫描速率为5 m V·s-1时,其电位窗口可增至1.8 V,能量密度达到0.41 Wh·m-2,循环5000圈后其比电容仍保持为初始比电容的81%.     

自动电位滴定法标定硫酸铈溶液和测定硫酸亚铁片中铁含量

采用自动电位滴定法标定硫酸铈溶液,并进行硫酸亚铁片中铁含量的测定。自动电位滴定法以电位突跃监测终点,在45℃~50℃之间,以草酸钠溶液标定硫酸铈溶液,测定值的相对标准偏差(n=5)为0.070%。取硫酸亚铁片1片用0.01mol·L-1硫酸溶液30mL溶解,直接用硫酸铈溶液滴定测定铁含量。方法用于硫酸亚铁片样品分析,回收率为100%,测定值的相对标准偏差(n=5)在1.2%~2.6%之间。     

惰性盐辅助合成介孔石墨化碳片及其电容性能

以惰性盐KCl为模板、硝酸镍为金属催化剂镍源、葡萄糖为碳源,通过碳化处理制备了介孔石墨化碳片。利用扫描电子显微镜、透射电子显微镜、X-射线衍射仪和比表面测试仪对介孔石墨化碳片进行了表征。探讨了碳片形成的机理,采用三电极测试体系研究了介孔石墨化碳片电极材料的电化学性能。结果表明,10 g KCl制备的碳片比表面积最大(989 m2·g-1),在6 mol·L-1KOH电解液中,当电流密度为0.5 A·g-1时,比电容达到180 F·g-1;当电流密度达到10 A·g-1时,比电容维持在148 F·g-1,显示了电极具有较好的倍率性能;在10 A·g-1条件下,2 000次循环充放电测试后电容没有发生衰减,展示了在超级电容器方面的应用潜力。     

超声波辅助提取-气相色谱法同时测定湿毒清片中14种有机磷农药残留

建立了超声波辅助提取-气相色谱法同时检测湿毒清片中14种有机磷农药残留的方法。样品采用乙酸乙酯超声提取,通过石墨化炭黑净化,采用气相色谱-火焰光度法(GC-FPD)进行检测。除乐果以外,13种有机磷农药于0.1mg/kg、0.5mg/kg两个加标水平的回收率在80.4%~114.5%之间,相对标准偏差为0.6%~12.4%。方法满足农残分析的要求,可用于湿毒清片中14种有机磷农药残留量的检测。     

原子吸收分光光度法空心阴极灯一灯多用探讨

利用原子吸收分光光度法分别用钾空心阴极灯测钠、锌空心阴极灯测铜,标准曲线线性良好,相关系数均在0.999以上。钾灯测量钠质控样结果为0.747 mg/L,在质控样标称值范围(0.712±0.049)mg/L之内。锌灯测量铜质控样结果为1.23 mg/L,在质控样标称值范围(1.19±0.05)mg/L之内。钾灯测钠的相对标准偏差为0.47%(n=6),加标回收率为99.8%。锌灯测铜的相对标准偏差为0.53%(n=6),加标回收率为103%。一灯多用在环境监测工作中是可行的。     

溶剂诱导翻转Pickering乳液用于原位循环使用酶催化剂

Separation and recycling of catalysts are crucial for realizing the objectives of sustainable and green chemistry but remain a great challenge, especially for enzyme biocatalysts. In this work, we report a new solvent-induced reversible inversion of Pickering emulsions stabilized by Janus mesosilica nanosheets (JMSNs), which is then utilized as a strategy for the in situ separation and recycling of enzymes. The interfacial active solid particle JMSNs is carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption experiments, Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA).The JMSNs are demonstrated to show order-oriented mesochannels with a large specific surface area, and the hydrophobic octylgroup is selectively modified on one side of the nanosheets. Furthermore, the inversion is found to be a fast process that is strongly dependent on the interfacial activity of the solid emulsifier JMSNs. Such a phase inversion is also a general process that can be realized in various oil/water phasic systems, including ethyl acetate-water, octane-water, and cyclohexane-water systems. By carefully analyzing the capacity of JMSNs with different surface wettabilities for phase inversion, a triphase contact angle (θ) close to 90° and a critical oil-water ratio of 1 : 2 are identified as the key factors to achieve solvent-induced phase inversion via a catastrophic phase inversion mechanism. Importantly, this reversible phase inversion is suitable for the separation and recycling of enzyme biocatalysts that are sensitive to changes in the reaction medium. Specifically, during the reaction, the organic substrates are dissolved in the oil droplets and the water-soluble catalysts are dispersed in the water phase, while a majority of the product is released into the upper oil phase and the enzyme catalyst is confined inside the water droplets in the bottom layer after phase inversion. The perpendicular mesochannels of JMSNs provide a highly accessible reaction interface, and their excellent interfacial activity allows for more than 10 rounds of consecutive phase inversions by simply adjusting the ratio of oil to water in the system. Using the enzymatic hydrolysis kinetic resolution of racemic acetate as an example, our Pickering emulsion system shows not only a 3-fold enhanced activity but also excellent recyclability. Because no sensitive chemical reagents are used in this phase inversion process, the intrinsic activities of the catalysts can be preserved even after seven cycles. The current study provides an alternative strategy for the separation and recycling of enzymes, in addition to revealing a new innovative application for Janus-type nanoparticles.     

氮化硼纳米片在重防腐涂层中的应用进展

氮化硼纳米片也被称为“白色石墨烯”,是一种重要的纳米填料,具有优异的机械性、导热性、耐磨性、阻隔性、疏水性,同时也是一种新兴的性能优良的绝缘材料.被广泛应用于重防腐涂层、润滑剂、传感器等领域.基于氮化硼纳米片在金属腐蚀防护领域巨大的应用前景,本综述将从氮化硼纳米片的制备及表面官能化、氮化硼薄膜防护涂层、氮化硼纳米片/有机防护涂层、氮化硼纳米片-无机复合材料/有机防护涂层这四部分进行系统总结,重点围绕氮化硼纳米片在有机涂层中均匀分散能力以及金属腐蚀防护能力等方面等进行详细分析和介绍,同时对氮化硼纳米片基防腐涂料未来发展进行了展望.     

原位溶剂热聚合法制备金属有机骨架/碳化氮纳米片涂覆的固相微萃取纤维用于红茶中农药残留的高灵敏检测

有机氯（OCPs）和拟除虫菊酯（PYs）是两类广泛使用的农药,对自然环境和人类健康具有极大危害。在本研究中,通过原位溶剂热聚合法制备了金属有机骨架/碳化氮纳米片（UiO-66/HOCN）复合材料涂覆的固相微萃取（SPME）纤维,该纤维拥有良好的稳定性,并对OCPs和PYs具有高效的萃取性能。将其与气相色谱-质谱（GC-MS）相结合,建立了用于OCPs和PYs检测的高灵敏分析方法。该方法对9种农药目标物表现出了令人满意的回收率和重现性,具有检出限低（0.03~0.30 ng/L）、线性范围宽（0.1~800.0 ng/L）和线性相关系数良好（≥ 0.9978）等优点。将所建立的方法用于实际红茶样品中农药残留的检测,成功地在实际样品中检测出了艾试剂（6.6 ng/L）、α-硫丹（54.7 ng/L）和联苯菊酯（185.8 ng/L）。实验结果表明,所建立的分析方法适用于复杂基质中农药残留的分析和监测。     

碳量子点在八面双锥和纳米片TiO2上的光催化

依次用溶剂热法和水热法制备得到暴露(101)晶面的八面双锥体二氧化钛OBP-TiO2和不同碳负载量的N-CDs/OBP-TiO2复合催化剂,以及暴露(001)晶面的纳米片二氧化钛TNS和不同碳负载量的N-CDs/TNS复合催化剂。利用TEM、XRD、XPS等表征手段对这2类复合催化剂的形貌结构、化学成分等作了鉴定。系统研究了碳量子点负载量对可见光降解RhB的光催化性能影响。实验发现,由于N-CDs的加入,均能较大提高2类复合催化剂的光催化性能。(101)高裸露晶面N-CDs/OBP-TiO2比(001)高裸露晶面N-CDs/TNS的光催化活性高。