轴流压缩机转子叶栅内粒子沉积及对其性能影响的数值研究

计算了一轴流压缩机入口级的三维流场,在此基础上,通过UDF引入作用于旋转坐标系下固体粒子上的附加 力,计算了该入口级动叶内粒子的运动轨迹和叶面上粒子的沉积分布情况,并在此基础上模拟了由于粒子沉积所引起的压 缩机动叶叶栅的性能恶化,为发展气动防沉三维叶片的优化设计提供了研究基础。     

变频制冷压缩机的匹配研究

针对空调用变频制冷压缩机的变转速运行条件,提高变频制冷压缩机在空调工况下工作的热效率。文中分析了变频制冷压缩机的实际运行特性,提出了一种优化匹配方法。利用Matlab的优化工具箱对某一房间空调器用滚动转子式制冷压缩机进行了优化匹配计算,总结出可以在一定范围内使用的经验算法。     

基于波束形成的多类型多声源定位研究

为实现空压机多噪声源的准确定位,仿真对比了多种近场球面波多声源定位算法。基于时域波束形成,研究了相同声源平面、不同声源频率、不同声源纵向距离、不同声源强度下多声源定位以及声源频率、声源纵向距离和声源强度多因素联合的多声源定位仿真方法,模拟了更接近实际的噪声源类型。基于频域波束形成,仿真研究了1400 Hz,2400 Hz,3400 Hz,4400 Hz的多声源。分别利用互功率谱波束形成和除自谱的互功率谱波束形成,仿真研究了相干声源和不相干声源。开发了阵列声成像测试平台,运用频域波束形成和功率谱波束形成对空压机进行了定位试验研究。结果表明,1400 Hz下空压机的主要噪声源是气缸盖、空气滤清器和曲轴附近的机体,这可为空压机减振降噪改进设计提供依据。     

Design and simulation of a C-band SLED with mode converter

The transient response analysis of the SLED based on the equivalent circuit is described. Then, a C-band SLED using TE0,1,15 mode cylindrical cavity with TE10-TE01 mode converter has been designed. According to the main RF parameters of the accelerator, the coupling coefficient is optimized to obtain the maximum multiplication factor. The key components of the pulse compressor include a 3 dB directional coupler, a TE10-TE01 mode converter,and a cylindrical cavity, which are simulated and optimized using 3D electromagnetic field simulation software. In addition, the function defining the relation between the coupling factor and aperture size is derived by a mathematical fitting method.     

Pressure pulsations in piping system excited by a centrifugal turbomachinery taking the damping characteristics into consideration

Pressure pulsations excited by a centrifugal turbomachinery such as compressor, fan or pump at the blade passing frequency may cause severe noise and vibrations in piping system. Therefore, the practical evaluation method of pressure pulsations is strongly recommended. In particular, the maximum pressure amplitude under the resonant conditions should be appropriately evaluated. In this study, a one-dimensional excitation source model for a compressor or pump is introduced based on the equation of motion, so as to incorporate the non-linear damping proportional to velocity squared in the total piping system including the compressor or pump. The damping characteristics of the compressor or pump are investigated by using the semi-empirical model. It is shown that the resistance coefficient of the compressor or pump depends on the Reynolds number that is defined using the equivalent velocity of the pulsating flow. The frequency response of the pressure amplitude and the pressure distribution in the piping system can be evaluated by introducing the equivalent resistance of the compressor or pump and that of piping system. In particular, the relation of the maximum pressure amplitude in piping system to the location of the excitation source under resonant conditions can be evaluated. Finally, the reduction of the pressure pulsations by use of an orifice plate is discussed in terms of the pulsation energy loss.     

容积式制冷机组性能测试的一种改进实验装置

针对容积式压缩机组测试设备的初始投资高,能耗高的问题,介绍了一种改进的实验装置.其制冷量测量采用制冷剂液体流量计法。研究测试结果表明:(1)改进实验装置控制精度较高;(2)改进的实验装置的相对误差为1.5%。与房间量热计相比,该实验装置节能72.2%且初始投资节省60%。     

新型动磁式直线压缩机电机的改进设计

研制了一种新型直线压缩机驱动用动磁式直线振动电动机。建立了电动机磁路物理模型,并对电动机动子动力学模型进行了求解,得到了电磁驱动力的基本要求,分析了电动机参数对动子运动特性和电动机性能的影响。运用电磁场有限元方法对动磁式直线电动机电磁场模型求解,磁通分布揭示了电磁力产生机理,分析并优化了不同于传统直线电机的设计方式。数据分析揭示了动磁式直线电动机力-位移-电流之间的关系,为压缩机和电动机控制系统设计奠定了基础。     

100Hz级脉冲管制冷机整机特性研究

脉冲管制冷机在更高频率下操作有利于系统体积的减小,同时也提高了能量的密度。本文首先介绍了直线压缩机驱动直线型脉冲管制冷机的整机计算模型,对于惯性管进行了湍流修正后的阻抗相位分析,结果表明频率越高,湍流影响越小。在100Hz下,整机取得了12．4W的制冷量,冷头温度到达31．8K,整机相对卡诺效率18．4％,已经十分接近...     

吸力面小翼对扩压叶栅间隙泄漏的影响

采用数值模拟方法对利用吸力面小翼方式控制压气机叶栅间隙流动进行研究。结果表明,附加吸力面小翼可以降低叶顶泄漏流速,削弱泄漏涡强度,使得泄漏涡区损失降低。不同宽度吸力面小翼在不同间隙下部可以较好地减少叶尖泄漏,在叶顶间隙为3.3%叶高时,附加相对宽度为0.5的吸力面小翼可使损失降低4.7%。叶顶压差的降低及对泄漏涡结构的改变是吸力面小翼降低泄漏掺混损失的主要原因。     

不同长度端壁翼刀对跨声速压气机叶栅二次流影响的数值研究

对可控扩散叶型(CDA)环形叶栅和4种具有不同长度和流向位置的端壁翼刀叶栅内的三维黏性流场进行了数值模拟。结果表明:较长翼刀对气流横向流动的阻断作用较强,较短翼刀产生的附加损失较小;加装翼刀后叶栅中部气流流动状况显著改善,但端壁附近损失有所增加;翼刀加装在流道前部比后部更有利于降低总能量损失,占据前1/2流道的翼刀方案为本文最佳翼刀方案,使叶栅总能量损失比原型叶栅低2.2%。