正交设计-紫外分光光度法测定青蒿中的青蒿素

以干青蒿叶为原料,考察石油醚萃取青蒿素的工艺条件,如温度、时间、溶剂量及超声功率等因素,正交法确定了最佳萃取工艺条件为温度40℃,超声功率90W,时间20min（两次）,液固比120∶1（mL.g-1）。紫外分光光度法直接测定不同产地青蒿中青蒿素的含量,结果表明：用超声波强化石油醚萃取青蒿素与常规浸泡法石油醚萃取比较,用超声波可以大大缩短萃取时间,提高了萃取率。     

基于超声波干涉的峰谷法计算声速值及实验误差探讨

介绍了基于Cassy Lab软件下的超声波干涉实验,提出了利用超声波干涉现象测量声速的方法.根据干涉理论推导了峰谷法测量声速的计算公式.分析和探讨了峰谷法计算声速的误差来源和改进方法.     

超声波多普勒实验仪

基于多普勒效应原理,分别测得波源的频率和发生相对运动时观测到的频率即可分析出物体相对运动的速度.实验仪以单片机为测控系统核心实现超声波多普勒效应演示实验及速度测量并提供了具体的设计方案与实验结果.同时单片机赋予了仪器以软件为核心的技术特点,具有重塑性与可扩展性.     

声钳在微流控芯片中的发展和应用

 一、声钳的历史和现状 二、声钳技术的原理 三、 声学共振器的制备 四、现阶段几种对流体中样品操控的方法 五、国外声钳技术进展 六、国内声钳技术研究 七、声钳微流技术的发展与展望     

单原子层纳米片新技术

 英国牛津大学的尼克罗西（Valeria Nicolosi）和爱尔兰三一学院的科尔曼（Jonathan Coleman）领导的国际研究小组研发出以超声波脉冲和普通溶剂制备单原子层纳米片的新技术。该技术糅合了最近荣获诺贝尔奖的石墨烯技术,简单、廉价、高效,可实现大规模工业化生产。
他们以该技术开发了大量的纳米片新材料,包括氮化硼、二硫化钼、碲化铋,它们在新型电子设备、超强复合材料、能量生产储存中显示出卓越的性能。这些新材料将成为重要的热电材料,以其制造的热电设备可从燃气、石油、煤电站的废热中提取热量,效率高达70%,而且成本低廉、过程简单。这些新材料还可用于称为“超级电容器”的下一代电池,其效率比目前的电池要高成千上万倍,从而使电动汽车等工业技术的水平获得极大地提升。     

船用超声液位传感器的分析与设计

介绍了一种船用某型超声液位传感器的基本结构和工作原理。在对脉冲式超声探头的轴向声压分布特点及其声透射强度分析研究的基础上,给出了该传感器的超声信号发射端与接收端之间距离d和压电晶片保护膜的壁厚δ值的确定方法。最后设计了一套超声液位传感器性能测试实验平台,对上述理论研究结论进行了实验验证。     

Dynamical process of cavitation bubble adsorbed in gold nanoparticle under combined irradiations of laser and ultrasound

Under combined irradiation of laser and ultrasound,cavitary bubbles are generated on the surface of gold nanoparticle.The laser-induced thermal effect,ultrasonic cavitation effect and the synergistic effect of laser and ultrasound are studied by means of the investigation of the dynamical process for the vibration of the cavitation bubble,with different external conditions such as laser power,ultrasound intensity,etc.It is found that dynamical process of the cavitation bubble can be modified by the irradiation of laser or ultrasound.The enhancement of laser power can increase the critical radius of the cavitation bubble,while that of ultrasound may intensify the vibration.Cavitation bubble may become more stable due to the synergistic effect of laser and ultrasound.It is also found that variation of the coupling between laser and ultrasound can affect synergistic effect.     

Characterizing the properties of ultrasonics propagating on the surface of materials with defect by Laser-ultrasonics method

A laser ultrasonics method is used to characterize the propagation properties of surface wave traveling on the surface of materials with sub-surface defect in 2D.Linear and nonlinear propagation properties of ultrasonics caused by the defects have been detected in experiment. A theoretical model is proposed and used to study the linear and nonlinear properties of ultrasonics caused by the defect.The numerical results indicate that the nonlinear ultrasonic wave will be excited when a finite amplitude ultrasonics propagates on the surface of materials with sub-surface defect.The theoretical analysis confirms that the nonlinear wave is caused by the "clapping"of the interface of defect instead of the mode conversions of ultrasonics.     

Analysis of ultrasonic guided waves propagating in long bones and cortical thickness based on time-frequency methods

The ultrasonic signals in long bones contain multiple guided modes which are mutual superposed.The velocities of guided waves in long bones are very sensitive to cortical thickness (CTh).In this paper,Hilbert-Huang transform(HHT) was proposed to analyze multi-mode guided waves,which can decompose superposed waves into many independent modes.Then the group velocity of each mode was obtained at corresponding frequency,which was compared with the results of short time Fourier transform(STFT).The CTh was also obtained by comparing with the theoretical calculation.The results showed that the experimental determined thickness was in agreement with the actual CTh,indicating that measuring the velocity of the guided mode can be used to estimate the CTh.The HHT is an effective method to identify multimode guided waves.     

第15届固态传感器、传动器与微系统国际会议(Ⅱ)

本届会议的专题报告按日程安排分述如下:(1)T Wacharalindu:以液态半导体为基础的微功率源--采用反射能量转换;(2)C M Waits,MMc Carthy,R Ghodea:供小规模动力系统中输送燃料用的、微电动机械系统的涡轮泵;(3)I D Block、P c Mcthals、M Ganoch:增强荧光与无标记成像联用仪;(4)L H Loo、Y D Lau:应用微结构的流体动力学偶联方法进行微型悬臂的质量因子的调谐;(5)K Imagawa,H Horilauchi,K Ikoda:应用心脏肌肉细胞的药物模拟方法的自给加热与流体泵送凝胶;(6)N Suhkl:供模拟在任何硅取向的表面组织与几何形态用的连续分格自动化技术.