微尺度水平单管内流动沸腾特性实验研究

对非共沸混合工质R134a/R32(75/25)在水平微尺度管道内的流动沸腾换热实验结果进行了分析和讨论,以探究微细通道内流动沸腾换热的主导机制。对影响其换热的多种因素(热流密度、质量流量和质量干度)进行了分析,实验得出,当质量干度较低时,热流密度和质量流量共同控制着微尺度管内的换热方式,当热流密度的影响占主导地位时,管道内的换热以核态沸腾为主;当质量流量的影响占主导地位时,管道内的换热以强制对流为主。     

车辆天窗气动噪声的数值分析与实验研究

本文从汽车天窗气动噪声的机理入手,利用与实车几何尺寸为1:5的简化模型进行了空腔绕流的数值计算,分析了其流场结构及气动噪声产生的原因.在低速静音风洞中进行了不同流速下的流场和声场实验研究,研究了天窗不同位置的速度剪切层变化,以及不同流速下的声压级变化,发现了除了特征频率下的风振噪声,还存在较大频率范围的气动噪声,其随着...     

面向半导体照明的光学

以发光二极管(LED)为核心的半导体照明光源成为世界公认的第三代照明光源.通常基于蓝光LED抽运黄色荧光粉产生白光的方案,因荧光粉的斯托克斯位移和宽光谱,其具有产业化价值的发光效率上升范围受到极大限制.另外,传统封装LED因其朗伯型发光分布和超高亮度会造成严重的眩光以及光分布难以满足照明应用要求从而导致光污染、光浪费,...     

航天鱼眼相机光学系统设计的研究

充分考虑鱼眼相机应用的空间环境特点,设计了一款基于1/3inch(1inch=25.4mm)CCD的航天鱼眼相机光学系统,系统焦距2.1mm,F数为4,视场角为210°,工作温度-40℃～+60℃。重点研究了环境因素对鱼眼相机光学系统成像质量的影响,分别从抗空间带电粒子、抗紫外辐照、温度和气压适应性方面进行了分析和研究,给出了相应的解决思路和方法。相机在严峻的空间环境下具有良好的环境适应性,为在轨获得超广角空域信息提供了保证。     

带有无光焦度校正板两镜系统的三级像差校正

为增强光学系统校正像差的能力或者避免使用非球面,可在两镜系统中引入无光焦度校正板.该类系统中含有7个变数,有利于系统的像差校正,并且无色差.依据三级像差理论、规一化法及近轴公式,对该类系统进行了像差校正的理论分析,得出了各种平衡三级像差的校正条件.并通过一个实例,借助光学设计软件对此进行了验证.带有无光焦度校正板两镜系...     

《核聚变与等离子体物理》征稿简则

《核聚变与等离子体物理》(季刊)是中国核学会核聚变与等离子体物理学会会刊,是中文物理学类、原子能技术类核心期刊,由核工业西南物理研究院主办,1980年创刊,原子能出版社出版,国内外公开发行。     

Two-dimensional photon counting imaging detector based on a Vernier position sensitive anode readout

A two-dimensional photon counting imaging detector based on a Vernier position sensitive anode is reported. The decode principle and design of a two-dimensional Vernier anode are introduced in detail. A photon counting imaging system was built based on a Vernier anode. The image of very weak optical radiation can be reconstructed by image processing in a period of integration time. The resolution is superior to 100 μm according to the resolution test. The detector may realize the imaging of very weak particle flow of high-energy photons, electrons and ions, so it can be used for high-energy physics, deep space exploration, spectral measurement and bio-luminescence detection.     

Sm_2Co_（17） magnet blocks for the in-vacuum undulators （IVU20） at the SSRF

The design and development status of Sm₂Co₁₇ magnet blocks for two in-vacuum undulators (IVU20) at the SSRF with the same hybrid design has been described. By the technological improvement of some processes and comparison with the experimental Sm₂Co₁₇ magnet blocks for the IVU25A, magnetic properties such as the intrinsic coercive force H_ci and the average magnetic moment M are increased, the bend point magnetic field H_k value and pass rate are significantly increased, and the magnetic field uniformity of the magnet blocks are significantly improved. The basic developmental method of high uniformity Sm₂Co₁₇ magnet blocks for IVU20 is presented. The magnetic field qualities of the magnet blocks, including the magnetic property, the magnetic moment distribution, the magnetization deviation angle and the magnetic field uniformity, basically satisfy the specifications of the two IVU20 in-vacuum undulators.     

Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design

The construction of China Spallation Neutron Source (CSNS) has been initiated in Dongguan, Guangdong, China. Thus a detailed radiation transport analysis of the shutter neutron beam stop is of vital importance. The analyses are performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method. The target of calculations is to optimize the neutron beamline shielding design to guarantee personal safety and minimize cost. Successful elimination of the primary ray effects via the two-dimensional uncollided flux and the first collision source methodology is also illustrated. Two-dimensional dose distribution is calculated. The dose at the end of the neutron beam line is less than 2.5 μSv/h. The models have ensured that the doses received by the hall staff members are below the standard limit required.