条件风险下的两基金分离定理

鉴于条件风险价值CVaR具有风险度量的合理性以及两基金分离定理对证券投资的重要意义,以CVaR作为风险度量研究两基金分离定理.在组合收益率服从正态分布的假设下,分别就投资组合含有或没有无风险资产的情形提出并证明了两基金分离定理;放开方差-协方差矩阵为非奇异这一通常假设,证明了CVaR风险度量下的两基金分离定理依然成立.     

基于Heck插入策略的钯催化烯烃与α-溴代烷基羰基化合物的烯烃氧化双官能化反应合成吲哚2-酮类化合物

正钯催化Heck偶联反应一般首先经过插入和加成步骤生成含C—Pd键中间体A,最后通过β-H消除来实现钯催化循环.如何利用中间体A中的C—Pd键引入新官能团是有机合成研究难点之一.目前有两种策略:(1)零价钯催化体系下,烯烃与卤代烃反应生成含C—Pd键中间体A,然后与亲核试剂(芳基硼酸,Cl-,CO,烯烃和炔烃等)实现烯烃双官能团化反应;(2)两价钯/氧化剂催化体系下,烯烃与有机金属试剂反应生成含C—Pd键中间体A,然后与亲核试     

钯-膦-酸体系催化烯烃氢酯基化反应研究进展

烯烃氢酯基化反应是羰基合成领域的重要分支之一,长期以来一直备受关注。目前已发展了钯基、铑基、钴基、钌基等众多催化体系,其中钯-膦-酸催化体系因具有反应条件温和、底物普适性良好、催化性能优异等优点而得到最广泛、最深入的研究。因此,我们对均相、非均相的钯-膦-酸催化体系在烯烃氢酯基化反应中的研究应用进行了简要综述,并对催化机理、催化剂组成和性能进行讨论,最后指出稳定性高、可回收性好的非均相钯-膦-酸催化体系将是该领域的研究重点。     

弹弓效应原理简析

文章用速度变换和矢量图对"弹弓效应"的加速原因做出了较为简洁直观的解释,以关于"弹弓效应"的一个简例.分析"弹弓效应"中的加速条件,得出能使入射物体被加速的偏转角范围.与通常所采用的两体碰撞理论相比较,此方法更能凸显"弹弓效应"的加速机理,且能有效避免冗繁的数学运算.将"弹弓效应"与粒子散射问题对照分析,得出两者之间的可类比性.因而可由散射问题中的散射角关于瞄准距离的公式类比推出"弹弓效应"中偏转角与瞄准距离之间的关系.文章还将"弹弓效应"的思想推广到了一般尺度上的两体问题.     

气相色谱法分析植物油中的脂肪酸

确定了植物油脂肪酸进行气相色谱分析前合适的样品处理步骤及条件和最佳的气相色谱分析方法,对6种食用植物油进行了处理分析。样品前处理主要步骤及条件:约0.045g样品,先加入萃取剂苯-石油醚(2:1,V/V)2mL;然后用2mL 0.4mol/L KOH-CH3OH溶液作酯化剂,于60℃酯化30 min后,再用1.5mL 15%BF3-CH3OH(w t%)溶液作酯化剂,于50℃酯化40 min。由食用植物油样品甲酯化后进行GC分析可知,各类植物油中的脂肪酸均能得以甲酯化进行准确的定性、定量分析。     

保留时间两点校正反相高效液相色谱法测定持久性有机污染物的正辛醇-水分配系数

采用改进的反相高效液相色谱法(RP-HPLC)测定了持久性有机污染物(POPs)包括多环芳烃(PAHs)、多氯二苯并二恶英(PCDDs)、多氯二苯并呋喃(PCDFs)和十溴二苯乙烷(DBDPE)等的正辛醇-水分配系数(logKow)。采用保留时间双点校正法(DP-RTC)校正因色谱柱老化等引起的保留时间漂移。以37种有可靠logKow实验值的苯系物、PAHs、PCDD/Fs类似物为模型化合物,建立了logKow和外推至纯水相的保留因子logkw的定量结构-色谱保留关系(QSRR)模型,回归方程为logKow=(1.18±0.02)logkw+(0.36±0.11),其相关系数(R2)为0.985,交叉验证相关系数(R2cv)为0.983,标准偏差(SD)为0.16。进而,用4个已有可靠logKow实验值的验证化合物(联苯、芴、PCDD 1和PCDF 114)对模型进行了外部验证,表明RP-HPLC测得的logKow值与摇瓶法/慢搅法结果有很好的一致性,尤其是对疏水性强的化合物。采用该模型测定了29种特别受关注的POPs的logKow值,这些化合物的logKow实验值均未见报道。所建立的DP-RTC-HPLC是测定强疏水性POPs的logKow值的一种值得推荐的方法。     

气相中Co+催化N2O与C2H6循环反应催化剂活性的理论研究

采用密度泛函理论UB3LYP方法对Co⁺在三重态及五重态势能面上催化N₂O与C₂H₆进行循环反应的两态反应机理进行了研究. 运用Harvery方法优化了两自旋态势能面5个最低能量交叉点（MECP）,计算了MECP处自旋-轨道耦合作用. 采用Landau-Zener公式计算了自旋翻转处的系间窜越几率,各MECP处均可发生有效系间窜越. 通过应用Kozuch提出的能量跨度模型,Co⁺催化N₂O与C₂H₆在298K下反应生成CH₃CHO时有最大的TOF值3.35×10^-21 s^-1.     

Biodegradable thermogel as culture matrix of bone marrow mesenchymal stem cells for potential cartilage tissue engineering

Poly（lactide-co-glycolide）-poly（ethylene glycol）-poly（lactide-co-glycolide）（PLGA-PEG-PLGA） triblock copolymer was synthesized through the ring-opening polymerization of LA and GA with PEG as macroinitiator and stannous octoate as catalyst. The amphiphilic copolymer self-assembled into micelles in aqueous solutions, and formed hydrogels as the increase of temperature at relatively high concentrations（〉 15 wt%）. The favorable degradability of the hydrogel was confirmed by in vitro and in vivo degradation experiments. The good cellular and tissular compatibilities of the thermogel were demonstrated. The excellent adhesion and proliferation of bone marrow mesenchymal stem cells endowed PLGA-PEGPLGA thermogelling hydrogel with fascinating prospect for cartilage tissue engineering.     

Phase behavior of amphiphiles at liquid crystals/water interface: A coarse-grained molecular dynamics study

We present a coarse-grained molecular dynamics simulation study of phase behavior of amphiphilic monolayers at the liquid crystal （LC）/water interface. The results revealed that LCs at interface can influence the lateral ordering of amphiphiles. Particularly, the amphiphile tails along with perpendicularly penetrated LCs between tails undergo a two-dimension phase transition from liquid-expanded into a liquid-condensed phase as their area density at interface reaches 0.93. While, the liquid-condensed phase of the monolayer never appears at oil/water interface with isotropic shape oil particles. These findings reveal the penetration of anisotropic LC can promote ordered lateral organization of amphiphiles. Moreover, we find the phase transition point is shifted to lower surface coverage of amphiphiles when the LCs have larger affinity to the amphiphile tails.     

烷基链工程对两亲有机半导体热力学性能影响的研究

Due to their special polar structure, amphiphilic molecules are simple to process, low in cost and excellent in material properties. Thus, they can be widely applied in the preparation of functional film materials and bionics related to cell membranes. Therefore, amphiphilic organic semiconductor materials are receiving increasing attention in research and industrial fields. The structure of organic amphiphilic semiconductor molecules usually consists of three functional parts: a hydrophilic group, a hydrophobic group, and a linking group between them. The adjustment of their correlation to achieve the target performance is particularly important and needs experimental discussion regarding synthetic methodologies. In this work, we focused on the engineering of a substituent alkyl-chain, and an amphiphilic functional molecule (benzo[b]benzo[4, 5] thieno[2, 3-d]thiophene, named C_nPA-BTBT, n = 3–11) was proposed and synthesized. This molecule links the hydrophobic semiconductor backbone and hydrophilic polar group through alkyl chains of different lengths. Fundamental properties were investigated by nuclear magnetic resonance (NMR) and ultraviolet-visible spectroscopy (UV-Vis) to conform the structure and the band gap properties of the designed organic semiconductor. Thermodynamic features were investigated by thermogravimetric analysis (TGA) and corresponding differential thermal gravity (DTG), which indicate that the functional molecule C_nPA-BTBT (n = 3–11) has a great stability in ambient conditions. Moreover, the results show that the binding ability of the amphiphilic molecule to water molecules was regulated by the odd-even alternating effect of the alkyl chain and the intramolecular coupling with BTBT. Furthermore, differential scanning calorimetry (DSC) and polarized optical microscopy (POM) were used to study the material properties in detail. As the length of the alkyl chain increased, the functional molecule C_nPA-BTBT (n = 3–11) gradually changed from "hard" species with no thermodynamic changes to a transition one with a pair of thermodynamic peaks, and eventually to a "soft" one as a typical liquid crystal with clear observation of Maltese-cross spherulites. The cooling and freezing points were further studied, and the values and trends of their enthalpy and corresponding temperature fluctuated and alternated due to the volume effect, odd-even alternating effect, flexibility, and other functions of the alkyl chain. Three molecular models were proposed according to the thermodynamic study results, namely the brick-like model, transition model, and liquid crystal model. This work presents in-depth discussion on material structure and corresponding thermodynamic properties, and it is an experimental basis for the design, synthesis, optimization, and screening of target performance materials.