QSAR Studies on the COX-2 Inhibition by 3,4-Diarylcycloxazolones Based on MEDV Descriptor

Selective inhibition of cyclooxygenase-2 (COX-2) might avoid the side effects of current available nonsteroidal antiinflammatory drugs while retaining their therapeutic efficacy. A novel variable selection and modeling method based on prediction is developed to construct the quantitative structure-activity relationships (QSAR) between the molecular electronegativity distance vector (MEDV) based on 13 atomic types and the biological activities of a set of selective cyclooxygenase-2 inhibitory molecules, 3,4-diarylcycloxazolones (DAA) plus indomethacin,naproxen, and celecoxib. Using multiple linear regression, a 5-variable linear model is developed with the calibrated correlation coefficient of 0.9271 and root mean square error of 0.17 in modeling stage and the validated correlation coefficient of 0.9030 and root mean square error of 0.20 in leave-one-out validation step, respectively. To further test the predictive ability of the model, 20 DAA compounds are picked up to construct a training set which is used to build a QSAR model and then the model is employed to predict the biological activities of the balance compounds. The predicted correlation coefficient and root mean square error are 0.9332 and 0.19, respectively.     

用选择离子流动管质谱测定汽油和柴油蒸汽成分

采用选择离子流动管质谱(SIFT／MS)装置，以H30^ 、N0^ 为初始离子对汽油和柴油蒸汽进行了研究，质谱分析表明，汽油和柴油主要由C—H化合物组成，包括烷烃、环烷烃、烯烃、炔烃、二烯烃以及芳香烃。在这几种成分中，烷烃都占有最大的比例；汽油蒸汽和柴油蒸汽最大的区别是柴油蒸汽中长链大分子的挥发性C—H化合物所占的比例远远高于汽油蒸汽。文中还给出了以H30^ 、N0^ 为初始离子所得到的汽油蒸汽的质谱图，以及汽油、柴油蒸汽中各种成分的定量分析结果。     

氟的离子选择电极瞬时电位法测定

研究了氟离子选择电极瞬时电位分析法，其检出限和Nernst响应下限均低于传统电位分析法，空白液切换到试液时瞬时电位达到稳定的峰电位Vp比传统电位法的响应快得多，可以实现小体积试液的快速准确分析；用该法测定了自来水和矿泉水中氟的含量；利用校正曲线的截距和检出限计算了LaF3的溶度积，在0.1mol/L KNO3介质中Ksp(LaF3)=10^-28.45，在0.001mol/L柠檬酸钠＋HAc-NaAc缓冲液（pH=5.50，离子强度I＝0.10mol/L)介质中溶度积K′sp(LaF3)=10^-26.26；据此，计算得柠檬酸与La^3 络合物的稳定常数K1=10^5.46和K2=10^3.99；用离子水合吉氏自由能ΔGh(F^-,g)解释了不同浓度F^-试液瞬时电位的跃迁时间。     

Synthesis of a Tweezer—like Bis（Phenylthiapropoxy）calix[4]—arene as a Cation／π Enhanced Sensor for Ion—Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropxy)-calix[4]arene(3) and 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-5,11,17,23-tetra-tert-butylcalix[4] arene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes(ISEs).ISEs based on 3 and 4 as neutral ionophores were prepared,and their selectivity coefficients for Ag^ (lg KAg,M^pot)were investigated against other alkali metal,alkaline-earth metal,aluminum,thallium(Ⅰ）,Lead and some transition metal ions using the separate solution method (SSM).These ISEs showed excellent Ag^ seletivity over most of the interfering cations examined,except for Hg^2 and Fe^2 having relative smaller interference(lg KAg,M^pot≤-2.1).     

锌对非晶态Co-B合金的改性及催化肉桂醛加氢为肉桂醇的研究

采用KBH4还原法制备了非晶态Co-B和Co-Zn-B催化剂,以肉桂醛选择加氢制肉桂醇为探针反应,研究了Zn对Co-B非晶态催化剂的修饰改性作用,并采用XRD、DSC、XPS、和H2-TPD对催化剂进行了表征.研究表明,少量的Zn没有改变Co-B催化剂的非晶结构,但提高了催化剂主体的热稳定性,其中1%的Zn可使Co-B非晶态催化剂主体结晶放热峰提高12K,并在665K出现新的H2脱附峰,说明催化剂因掺入锌形成了新的氢吸附中心,锌在催化剂中以金属态和氧化态两种形式存在.催化剂的整体均衡而局部电子分布不均衡的缺陷势结构增强了对肉桂醛分子C=O双键O原子的侧链偶合吸附与金属氧化物的金属离子对羰基的极化作用协同活化了肉桂醛的C=O双键,提高了催化剂对C=O双键的加氢选择性.加氢反应工艺条件及催化剂寿命研究表明,适宜的反应温度为413K,氢压为2.5MPa,反应时间为3.0h,肉桂醇的最高产率可达84.0%,并具有较好的催化稳定性.     

Highly Selective Salicylate Membrane Electrode Based on N,N＇- （Aminoethyl）ethylenediamide Bis（2-salicylideneimine） Binuclear Copper（Ⅱ） Complex as Neutral Carrier

A new ion selective electrode for salicylate based on N,N＇-（aminoethyl）ethylenediamide bis（2-salicylideneimine） binuclear copper（Ⅱ） complex [Cu（Ⅱ）2-AEBS] as an ionophore was developed. The electrode has a linear range from 1.0 × 10^-1 to 5.0 ×10^-7 mol·L^- 1 with a near-Nemstian slope of （ - 55 ±1 ） mV/decade and a detection limit of 2.0 × 10-7 mol·L^-1 in phosphorate buffer solution of pH 5.0 at 25 ℃. It shows good selectivity for Sal^- and displays anti-Hofmeister selectivity sequence： Sal^-〉SCN^-〉 ClO4^- 〉I^-〉 NO2^- 〉Br^-〉 NO3^- 〉Cl^-〉 SO3^2- 〉 SO4^2- The proposed sensor based on binuclear copper（Ⅱ）complex has a fast response time of 5-10 s and can be used for at least 2 months without any major deviation. The response mechanism is discussed in view of the alternating current （AC） impedance technique and the UV-vis spectroscopy technique. The effect of the electrode membrane compositions and the experimental conditions were studied. The electrode has been successfully used for the determination of salicylate ion in drug pharmaceutical preparations.     

基于Al6Ge2O13还原制备Ge纳米粒子及其光致发光性能研究

以3-三氯锗丙酸和硝酸铝为原料，通过共沉淀法合成了Al₆Ge₂O₁₃陶瓷粉体，并利用TG-DSC、FTIR、XRD等研究了其形成过程。采用选择还原技术对Al₆Ge₂O₁₃进行还原处理，还原产物观察到发光峰位于564、611、681、730和774 nm的室温光致发光现象。比较不同温度下还原的样品，发现550 ℃保温3 h还原制备的样品发光强度最强，通过XRD、XPS和Raman光谱研究表明样品在可见和近红外光区的发光是源于平均粒径为1.98 nm且未能形成完整晶格的Ge纳米粒子团簇。     

表面活性剂在离子选择电极分析中的增敏作用

本文以涂丝Ag-Ag2S电极为指示电极,饱和甘汞电极和自制锑电极为参比电极,分别试验了加入阳离子、阴离子和非离子表面活性剂对电极灵敏度的影响。结果表明,加入非离子表面活性剂对电极响应无明显影响,但阴离子和阳离子表面活性剂可使电极灵敏度有较大提高;其中,十六烷基三甲基溴化铵(CTMAB)和十二烷基苯磺酸钠(SDBS)、十二烷基硫酸钠(SDS)对电极的增敏效果显著,可使电极响应线性范围下限扩大一个数量级左右,且电极响应时间缩短,稳定性提高。     

增塑剂对1,1,1-三[1′-(2′-氧杂-4′-氧代-5′-氮杂-5′-甲基)十二烷基]丙烷PVC膜钠离子电极性能的影响

以1,1,1-三[1′-(2′-氧杂-4′-氧代-5′-氮杂-5′-甲基)十二烷基]丙烷(即ETH 227,Fluka No.71732)为中性载体的钠离子选择电极由于具有较强的抗钾离子干扰的能力,因而颇受注意。Guggi等首先用邻硝基苯辛醚和癸二酸二丁酯增塑,以合成的ETH227制成了K_((Na)~+,K~+)~(pot),<<10~(-2)的PVC膜钠离子电极.Jenny等以癸二酸二异辛酯为增塑剂,     

CTMAB胶束体系中反离子缔合度的测定

对十六烷基三甲基淡化按（CTMAB）水胶束体系，不同方法测得其反离子缔合度产值不同【‘－＼且很高于由股团电化学理论所得q值0．67问．本文以离子选择性电极法测定CTMAB水胶束体系中反离子缩合度（仁0．65），并研究了外加盐和乙醇的影响·1实验部分1．工试剂和仪器十六烷基三甲基漠化技（CP）在无水乙醇中重结晶两次，纯化物经帕环法测其表面张力在CMC附近无最低声、·淡化钾（AR），水为。次蒸馏水，PXJIC型离子计，302型PB，电极（响应范围为PB，＝1．6～3．3，响应时间为5分钟）222型甘汞电极·1．2实验方法在CMCV／de的稀…