催化分光光度法测定油品及催化剂中的痕量钒

1 引言 张改兰、张振辉利用钒(V)在乙酸介质中于100℃下能催化溴酸钾氧化铬蓝黑R褪色,而建立了测定钒的最灵敏的催化分光光度法,其Sandell灵敏度为7.27×10~(-8)μg/cm~2。我们发现ng数量级的钒能在室温下催化上述反应,且共存物质的干扰限大幅度升高,提高了方法的选择性,简化了操作,能满足石油加工工业对分析钒的要求。本文考察了室温下催化反应的条件及12种离子的干扰情况,成功地将该法应用于石油产品及催化剂中痕量钒的测定。测定范围为0.3～6ng/25ml,检测限为0.3ng/25ml。用0.1g样品能检测到3.0ppb钒。     

CuZnAlZr催化剂上甲醇氧化水蒸气重整制氢I．催化剂组成的优化

采用共沉淀法制备了不同配比的CuZnAlZr复合氧化物催化剂，并通过XRD和TPR等表征技术及活性评价，考察了催化剂各组分配比对活性的影响，从而对各组分配比进行了优化．结果表明，组成为(Cu7Zn3)7(Al6Zr4)3的催化剂具有最高的催化活性，反应温度为200℃时，甲醇转化率可高达91％，而重整气体中CO的体积分数仅为0．12％．具有较高分散性及高还原性能的表相Cu组分的增加有利于提高催化剂的活性，Zn可以起到隔离和分散Cu的作用，而Al和Zr的存在可以稳定表相Cu^2 的存在形式．     

S-烯丙基硫赶磷酸酯在SiO2上的合成

探讨了O 烯丙基硫逐磷酸酯热重排制备S 烯丙基硫赶磷酸酯的反应条件 ,结果表明 :反应在SiO2 上进行几乎可定量地完成 .运用这一合成方法 ,制备了 14个不对称结构的新型硫赶磷酸酯 ,所有的化合物均经IR ,1HNMR ,3 1PNMR及元素分析表征 .生物活性试验显示 5a ,5e ,5h ,5i及 5k有良好的杀虫活性 .     

《Wuhan University Journal of Natural Sciences》Vol．9 No.6 2004摘要选登

四核苯甲酸锌配合物的合成和晶体结构；杯芳烃[6]修饰碳糊电极同时测定痕量铅和镉的研究；新型双卟啉的合成及结构表征；含二个硫脲基的荧光化学传感器的合成及其对二羧酸阴离子的识别行为     

聚丙烯酸长链酯的Huggins常数与其分子量的依赖性关系

聚丙烯酸高碳醇酯(PBA)及聚丙烯酸十八醇酯(POA)是具有长烷基侧链的梳状聚合物,在溶剂苯中的Huggins常数(k′)随其分子量(M)的变化而变化.在PBA-苯体系中发现,当M低于某一临界分子量(MLC)时,k′随分子量的降低显著增大;当M大于某临界分子量(MHC)时,k′随分子量的升高而增大;当M在MLC～MHC时,k′基本上保持不变.而在POA-苯体系中发现,当M低于某一临界分子量(MC)时,k′随分子量的降低显著增大;当M大于该临界分子量(MC)时,k′在0.33～0.43变化.文中同时给出了精确算法用来计算PBA-苯体系及POA-苯体系中PBA及POA的特性粘度.当k′＞0.758时,用稀释外推法计算;当0.758＞k′＞0.426时,用一点法公式[η]=ηsp/C(√)ηr计算;当0.426＞k′＞0.334时,用另一一点法公式[η]=(√)2(ηsp-lnηr)/C计算.     

Photocatalytic Synthesis of Oxygenates from Gaseous CO2 and CH4 over Semiconductor

Photoinduced synthesis of CO2 and CH4 was investigated using a batch reaction system on several photoactive materials supported on silicon dioxide. Single semiconductor showed higher selectivity to C1 compounds. The production of C2-C3 oxygenates took place preferentially on composite semiconductor photocatalysts. In particular, it was found that acetone was the primary product over Cu/CdS-TiO2/SiO2.     

A Novel and Efficient Catalytic System for Aerobic Oxidative Coupling of 2-Naphthol Derivatives

The paper reported a novel and efficient aerobic oxidative coupling reaction of 2-naphthol derivatives catalyzed by CuCu (Ⅰ or Ⅱ)N-alkylimidazole complexes in excellent yields. The crystal structure of CuCu(Ⅱ)N-methylimidazole complex to be determined by X-Ray.     

高职物理教学中的合成与分解

高职物理教学中涉及到合成与分解的地方主要有两处：一是力的合成与分解，另一是运动的合成与分解。由于学生在初中物理和数学教学中从未学过矢量概念，而高职数学中矢量的教学又要到很迟才进行，学生学习“合成与分解”的困难很多，笔者从以下几方面进行尝试，以解决学生在学习中的难点，消除模糊认识。     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang