A study on stress intensity factors and singular stress fields of three-dimensional interface crack

By using the finite-part integral concepts and limit technique, the hypersingular integrodifferential equations of three-dimensional (3D) planar interface crack were obtained; then the dominant-part analysis of 2D hypersingular integral was further used to investigate the stress fields near the crack front theoretically, and the accurate formulae were obtained for the singular stress fields and the complex stress intensity factors. After that, a numerical method is proposed to solve the hypersingular integrodifferential equations of 3D planar interface crack, and the problem of elliptical planar crack is then considered to show the application of the method. The numerical results obtained are satisfactory. Project supported by the Foundation of Solid Mechanics Open Research Laboratory of State Education Commission at Tongji University and the National Natural Science Foundation.     

一个多因子信用违约互换定价模型

考虑一个违约互换的多因子的简化模型,通过测度的转化并求解一个多变量Riccati常微分方程而得出了这个模型的解析解.此模型是Duffie-Pan-Singleton(2000)模型的特例,但是这个模型存在解析解,而Duffie-Pan-Singleton模型并不存在解析解.模型的解析解对获得直觉的判断和进行模型的计算都非常有帮助,而且模型的解析解对实证检验也是有帮助的.     

Computation of mixed mode stress intensity factors in a four-point bend specimen

Four-point bend specimen is one of the most important specimens of the fracture mechanics because it can produce mixed modes I and II. Therefore, computation of stress intensity factors in this specimen is of practical interest. Several relations have been suggested that no one of them has completely considered the effects of the loading point and crack geometry. In this paper, mixed mode stress intensity factors of the bend specimen are computed by finite element method (FEM) and after validating by comparing with the available results in the literature, the results will be assessed to determine the effects of different crack location and loading distances from the middle of the specimen. Finally, two new coefficients comprising these effects are introduced.     

软X射线条纹相机用于激光等离子体辐射温度的测量方法

本文提出了软X射线条纹相机与吸收膜相耦合测量等离子体温度的实验原理与方法,编制了数值计算程序SCC,给出了平面金靶在1.06μm激光(LF—II~=激光装置)作用下,靶面功率密度约10~(14)W/cm~2的辐射温度。并对温度处理中存在的误差,以及把此方法推广到能谱的时间分辨和温度的空间分辨测量中的可能性进行了讨论。     

城市交通管理中的出租车规划模型

最佳数量的确定和价格的制定是城市出租车规划中的两个核心问题.对影响出行强度的市区人口和建成区面积分析建立了出行总量预测模型,再通过分析出租车最佳数量与出租车运营里程的关系,得出出租车最佳数量的预测模型.在出租车最佳数量模型的基础上,分析出租车数量的差异和差异产生的原因,给出了出租车定价判断模型,为出租车定价机制的调整指明了方向.最后以长沙市为例进行了实证分析.     

A Markov model for analyzing the evolution of bladder carcinoma

A Markovian approach to analyze different states of the superficial vesical carcinoma is considered, taking into account up to two recurrences and the possibility of progression. So, three transient states are considered: free of disease, first, and second recurrence; and an absorbent state, the progression. A methodology based in phase-type distributions is also used, that allows the usual quantities of interest in survival studies to be expressed in a well-structured form. This type of distribution has shown its utility in queue theory, and has the advantage that mathematical expressions can be presented in a closed form that allows algebraic treatment.     

Formation mechanism of ethanol-water excimer

The fluorescent spectrum and the excitation spectrum were used to present the cluster molecular structure feature in ethanol-water solutions.Through analyzing the fluorescent characteristics of an excimer,it is proposed that the excimers are formed between the ethanol-water cluster molecules in the excited state and in the ground state.The fluorescent lifetime and the fluorescent intensity decay process give information about the photo-physical and photo-chemical processes of the formation and the dissociation of an excimer.The theoretical calculation and physical analysis coincide with the experimental results.The preliminary conclusion about the structure feature of ethanol-water cluster molecule is that it has a planar one like a sandwich.     

ARC INTERFACE CRACK IN A THREEPHASE PIEZOELECTRIC COMPOSITE CONSTITUTIVE MODEL

An in-depth investigation is made on the problem of an arc-shaped interface insulating crack in a three-phase concentric circular cylindrical piezoelectric composite constitutive model. An exact solution in series form is derived by employing the complex variable method. In addition, the distribution of physical quantities such as stresses, strains, electric displacements and electric fields in the whole field and along the interface is also presented. Explicit expressions for crack opening displacement, jump in electric potential on the crack surface and the electro-elastic field intensity factors at the crack tips are obtained. Specific calculations demonstrate that the convergence of the series form solution is satisfactory and that the outer phase (composite phase) will exert a significant effect on the electro-mechanical coupling response of the composite system. Owing to the fact that stresses and electric displacements still possess conventional inverse square root singularities, the oscillating singularities near the crack tip under plane strain conditions will be absent and, as a result, no unphysical interpenetration phenomenon of the two crack surfaces will occur. In conclusion, the elastic solution obtained is also based on a solid physical foundation. Project supported by the National Natural Science Foundation of China (No.59635140), and the Doctorate Foundation of Xi'an Jiaotong University.     

Analysis of ultrasound-assisted convective heating/cooling process: Development and application of a Nusselt equation

In this study, the convective heating/cooling process assisted by US irradiation is analyzed with the aims of developing a new convective heat transfer correlation. Heat transfer experiments were conducted with different copper machined geometries (cube, sphere and cylinder), fluid velocities (0.93–5.00 × 10⁻³ m/s), temperatures (5–60 °C), and US intensities (0–6913 W/m²) using water as heat transfer fluid. The Nusselt (Nu) equation was obtained by assuming an apparent Nu number in the US-assisted process, expressed as the sum of contributions of the forced convection and cavitation-acoustic streaming effects. The Nu equation was validated with two sets of experiments conducted with a mixture of ethylene glycol and water (1:1 V/V) or a CaCl₂ aqueous solution (30 g/L) as immersion media, achieving a satisfactory reproduction of experimental data, with mean relative deviations of 17.6 and 17.8%, respectively. In addition, a conduction model with source term and the proposed correlation were applied to the analysis of US-accelerated heating kinetics of dry-cured ham reported in literature. Results demonstrated that US improves heating of ham slices because of the increased heat transfer coefficients and the direct absorption of US power by the foodstuff.     

Control of the dynamics of a boiling vapour bubble using pressure-modulated high intensity focused ultrasound without the shock scattering effect: A first proof-of-concept study

Boiling histotripsy is a promising High-Intensity Focused Ultrasound (HIFU) technique that can be used to induce mechanical tissue fractionation at the HIFU focus via cavitation. Two different types of cavitation produced during boiling histotripsy exposure can contribute towards mechanical tissue destruction: (1) a boiling vapour bubble at the HIFU focus and (2) cavitation clouds in between the boiling bubble and the HIFU source. Control of the extent and degree of mechanical damage produced by boiling histotripsy is necessary when treating a solid tumour adjacent to normal tissue or major blood vessels. This is, however, difficult to achieve with boiling histotripsy due to the stochastic formation of the shock scattering-induced inertial cavitation clouds. In the present study, a new histotripsy method termed pressure-modulated shockwave histotripsy is proposed as an alternative to or in addition to boiling histotripsy without inducing the shock scattering effect. The proposed concept is (a) to generate a boiling vapour bubble via localised shockwave heating and (b) subsequently control its extent and lifetime through manipulating peak pressure magnitudes and a HIFU pulse length. To demonstrate the feasibility of the proposed method, bubble dynamics induced at the HIFU focus in an optically transparent liver tissue phantom were investigated using a high speed camera and a passive cavitation detection systems under a single 10, 50 or 100 ms-long 2, 3.5 or 5 MHz pressure-modulated HIFU pulse with varying peak positive and negative pressure amplitudes from 5 to 89 MPa and −3.7 to −14.6 MPa at the focus. Furthermore, a numerical simulation of 2D nonlinear wave propagation with the presence of a boiling bubble at the focus of a HIFU field was conducted by numerically solving the generalised Westervelt equation. The high speed camera experimental results showed that, with the proposed pressure-modulated shockwave histotripsy, boiling bubbles generated by shockwave heating merged together, forming a larger bubble (of the order of a few hundred micron) at the HIFU focus. This coalesced boiling bubble then persisted and maintained within the HIFU focal zone until the end of the exposure (10, 50, or 100 ms). Furthermore, and most importantly, no violent cavitation clouds which typically appear in boiling histotripsy occurred during the proposed histotripsy excitation (i.e. no shock scattering effect). This was likely because that the peak negative pressure magnitude of the backscattered acoustic field by the boiling bubble was below the cavitation cloud intrinsic threshold. The size of the coalesced boiling bubble gradually increased with the peak pressure magnitudes. In addition, with the proposed method, an oval shaped lesion with a length of 0.6 mm and a width of 0.1 mm appeared at the HIFU focus in the tissue phantom, whereas a larger lesion in the form of a tadpole (length: 2.7 mm, width: 0.3 mm) was produced by boiling histotripsy. Taken together, these results suggest that the proposed pressure-modulated shockwave histotripsy could potentially be used to induce a more spatially localised tissue destruction with a desired degree of mechanical damage through controlling the size and lifetime of a boiling bubble without the shock scattering effect.