Suppression of Stokes heating processes and improved optomechanical cooling with frequency modulation

Ground-state cooling of mesoscopic mechanical objects is still a major challenge in the unresolved-sideband regime. We present a frequency modulation (FM) scheme to achieve cooling of the mechanical resonator to its ground-state in a double-cavity optomechanical system containing a mechanical resonator. The mean phonon number is determined by numerically solving a set of differential equations derived from the quantum master equations. Due to efficient suppression of Stokes heating processes in the presence of FM, the ground-state cooling, indicated by numerical calculations, is significantly achievable, regardless of whether in the resolved-sideband regime or the unresolved-sideband regime. Furthermore, by choosing parameters reasonably, the improvement of the quantum cooling limit is found to be capable of being positively correlated with the modulation frequency. This method provides new insight into quantum manipulation and creates more possibilities for applications of quantum devices.     

Decline of nucleation in the heating process with a high heating rate

The effect of the heating rate on the nucleation of metallic glass in a rapid heating process starting from the glass transition temperature is investigated. The critical nucleus radius increases with the increase of the temperature of the undercooling liquid. If the increment rate of the critical nucleus radius, owing to the heating process, is higher than the growth rate of the nuclei, the nuclei generated at the low temperature will become the embryos at the high temperature. This means that the high heating rate can make no nucleation happen in the heating process. In consideration of the interfacial energy, the growth rate of the nuclei increases with the increase of their size and the growth rate of the critical nucleus is zero. Thus, the lower heating rate can also make the nuclei decline partially. Finally, this theory is used to analyze the nucleation process during laser remelting metallic glass.     

一种微波加热装置的风冷散热研究

微波加热装置工作过程会散发大量的热量,如果不能及时排出,会造成输出功率的下降.本文以九个磁控管加热单元组成的微波加热装置为研究对象,首先提出一种风冷散热结构设计,接着通过Fluent热仿真软件验证结构设计的合理性,然后通过对比分析加热装置进风口位置、面积大小等因素对散热效果的影响,对散热结构进行改进,进一步提高了内部磁...     

R600a喷雾冷却系统换热过程

以R600a压力式封闭系统喷雾冷却过程为研究对象,对其换热过程进行分析。对液滴撞击热面后的状态进行建模,分析了其运动状态。通过忽略液膜的对流换热,引入韦伯数来简化并修正雾滴与热源表面的对流换热系数关联式;借鉴二次成核理论,通过单位时间内,单位面积上覆盖的雾滴数量对核态沸腾换热系数关联式修正。通过上述分析,以对流换热和核态沸腾换热两种机理为中心,建立了新的换热系数关联式。通过与其他文献的关联式、实验测量值进行比较、不同工质进行比较、不同实验系统比较,发现该式预测值和实验测量值偏差在20%以内,能够很好地预测压力式封闭系统喷雾冷却过程的换热系数。     

Analysis of heating effect on the process of high deposition rate microcrystalline silicon

A possible heating effect on the process of high deposition rate microcrystalline silicon has been studied.It includes the discharge time-accumulating heating effect,discharge power,inter-electrode distance,and total gas flow rate induced heating effect.It is found that the heating effects mentioned above are in some ways quite similar to and in other ways very different from each other.However,all of them will directly or indirectly cause the increase of the substrate surface temperature during the process of depositing microcrystalline silicon thin films,which will affect the properties of the materials with increasing time.This phenomenon is very serious for the high deposition rate of microcrystalline silicon thin films because of the high input power and the relatively small inter-electrode distance needed.Through analysis of the heating effects occurring in the process of depositing microcrystalline silicon,it is proposed that the discharge power and the heating temperature should be as low as possible,and the total gas flow rate and the inter-electrode distance should be suitable so that device-grade high quality deposition rate microcrystalline silicon thin films can be fabricated.     

Linearization of radiative heating and cooling rates for the case of non-scattering planetary atmospheres

Rates of radiative heating and cooling of the non-scattering planetary atmosphere and scattering underlying surface are analytically linearized with respect to the atmospheric and surface parameters. Resulting expressions for sensitivities of radiative heating and cooling rates are used to formulate the linearized 1D radiative model of atmospheric dynamics which directly incorporates the relevant linearized atmospheric and surface parameters. Applications to more sophisticated models of atmospheric dynamics, as well as extension to the case of presence of atmospheric scattering, are briefly discussed.     

Use of ultrasound as a pre-treatment for vacuum cooling process of cooked broiler breasts

In this study, ultrasound application at two different frequencies (37 or 80 kHz) and durations (15 or 30 min) was used as a pre-treatment for raw broiler breasts, and its effect on cooling, color, textural and sensory characteristics of cooked broiler breasts during vacuum cooling process was determined. The anterior and posterior parts of broiler breast halves were carefully removed, and these parts with a 20 mm width were named as the regions A and B, respectively. Both regions were vacuum-packed and pre-treated by ultrasound, followed by oven-cooking in aluminum foils, and cooling time, weight loss and temperature distribution characteristics were determined. Besides sensory and textural properties, the effect of the ultrasound pre-treatment on the pH, dry matter and ash contents and color (CIELAB) values of cooked breasts was determined. During vacuum cooling, ultrasound pre-treatment significantly reduced cooling time required to cool cooked broiler breasts from 85 °C to 12.5 °C, and the lowest values for the regions A and B were obtained for the 30 min ultrasound pre-treatment at 37 kHz as 12.72 and 14.61 min, respectively (p < 0.05). The cooling losses of breasts from the regions A and B were 12.64 and 11.61%, respectively. In comparison to immersion pre-treatment, increasing the frequency and duration of ultrasound pre-treatment generally decreased cooking loss values for both A and B regions while cooling loss increased. Instrumental hardness values of breast samples for the 15 min ultrasound pre-treatment decreased while they increased with the 30 min pre-treatment (p < 0.05) at both frequencies. The redness values (a*) increased by ultrasound pre-treatment while the highest value was found for a 30 min pre-treatment at 80 kHz for both regions. Sensory hardness (on a 14.5 cm scale) results indicated that the highest value (9.33) was determined for a 30 min ultrasound pre-treatment at 37 kHz while the ultrasound pre-treatment at 37 kHz for 15 min had no negative effect on hardness compared to control samples (p > 0.05). In conclusion, ultrasound pre-treatment can be successfully used for the vacuum cooling process of broiler breasts for the reduction of cooling time, and a 30 min ultrasound pre-treatment at 37 kHz can provide relatively superior cooling characteristics.     

Combining ultrasound,vacuum and/or ethanol as pretreatments to the convective drying of celery slices

This work studied three emerging approaches to improve the convective drying (50 °C, 0.8 m/s) of celery. Celery slices of 2 mm thick were pretreated for 5 min using ultrasound (32 W/L, 40 kHz), vacuum (75 kPa vacuum pressure) and ethanol (99.8% v/v, as drying accelerator) applied individually or in combination. To evaluate individual effects of ultrasound and vacuum, the treatments were also performed with distilled water or air medium, respectively. Moreover, the cavitational level was characterized in each condition. Drying kinetics was evaluated tending into account the drying time required by each treatment and the Page’s model parameters. In addition, microstructural effects and shrinkage were evaluated. As results, ethanol combined with ultrasound significantly improved drying kinetics reducing drying time by around 38%. However, vacuum pretreatment did not affect drying kinetics even in combination with ethanol and/or ultrasound. Microstructural evaluation did not evidence cell disruption, suggesting changes in intercellular spaces, pores and/or cell wall permeability. The use of ethanol and vacuum showed a greater effect on shrinkage after pretreatment and after drying, respectively. In conclusion, at the studied conditions, the drying acceleration by vacuum and ultrasound is lower compared to the effect produced using ethanol.     

Application of airborne ultrasound in the convective drying of fruits and vegetables: A review

The application of airborne ultrasound is a promising technology in the drying of foods, particularly to fruits and vegetables. In this paper, designs of dryers using ultrasound to combine the convective drying process are described. The main factors affecting the drying kinetics with the ultrasound application are discussed. The results show that the ultrasound application accelerated the drying kinetics. Ultrasound application during the convective drying of fruits and vegetables shorten the drying time. Ultrasound application can produce an increase of the effective moisture diffusivity and the mass transfer coefficient. The influence of ultrasound on physical and chemical parameters evaluating the product quality is reviewed. Ultrasound application can decrease the total color change, reveal a low water activity and reduce the loss of some nutrient elements. Meanwhile, ultrasound application can also better preserve the microstructure of fruits and vegetables in comparison to convective drying.     

微波加热和粉碎电磁波加热的区别

微波加热过程主要利用微波的波动性,在加热过程中伴随着趋肤效应.粉碎电磁波加热过程主要利用电磁波的粒子性,在加热过程中的趋肤效应变得很小,同时粒子穿透过程变得很强.在实验过程中还发现有电子浓度起伏的金属表面而会使周围空气温度降低的电子致冷现象.     

An equation for the characteristic function of a Markov process and its application to a Langevin process

For Markov processes a “curtailed characteristic function” is defined. It obeys an equation similar to the master equation. Its solution provides the characteristic function of the process. By applying it to the radioactive decay process the stochastic properties of the corresponding Langevin force are determined.     

Establishing an ultrasound-assisted activated peroxide system for efficient and sustainable scouring-bleaching of cotton/spandex fabric

This study presents a high-efficient and cost-effective ultrasound-assisted strategy for one-bath one-step scouring and bleaching of cotton/spandex fabric using sodium percarbonate (SPC) and tetraacetylenediamine (TAED) couple. SPC plays both roles of pH regulator and H₂O₂ donor to initiate the peracetic acid (PAA) release from TAED. The significance and interaction effects of operating parameters (TAED concentration, temperature and time) on the WI (Whiteness Index) of fabrics were investigated through a central composite design. The bleaching mechanism was studied by exploring the relationship between WI and PAA and hydroxyl radical (HO·) concentrations. The mechanical and dyeing performances of treated fabrics were also evaluated. Results show that temperature exerted a significant impact on WI followed by TAED concentration and time. The PAA concentration decreased and HO· concentration increased upon the temperature rise. Both PAA and HO· were significant to upgrade WI and ultrasound was effective in enhancing their bleaching efficiency. The fabric treated only with 15 mmol/L TAED and 10 mmol/L SPC at 40 °C for 40 min under ultrasound could achieve a WI of 68.6 (43% higher than greige fabric), which was almost equivalent to that of the fabric treated at 60 °C without ultrasound. This verifies the contribution of ultrasound technology in reducing bleaching temperature for energy-saving purpose. Moreover, the treated fabric displayed less than 5% tensile strength loss, having a marginal impact on the apparel performance. The wettability of fabric was greatly improved leading to a good dyeing performance. Encouraging results demonstrate the high efficiency of the ultrasound-assisted pre-treatment process of cotton/spandex fabric, which contributes to the sustainable production of textiles.     

Preparation and characterization of Gd2O3:Eu rods by surfactant assemblies—microwave heating

Gd₂O₃:Eu³⁺ rods were successfully obtained by microwave heating the as-prepared substance, which templated by surfactant assemblies of gadolinium hydroxide and europium hydroxide, formed in a reaction between Gd(NO₃)₃-Eu(NO₃)₃ and urea. Transmission electron microscopy (TEM) characterizations indicated that the synthesized rods with an averaging diameter of 100-150 nm and agglomerates slightly. Powder X-ray diffraction (XRD) results indicated that the resultant rods were cubic Gd₂O₃. The luminescent of Gd₂O₃:Eu³⁺ rods were investigated by photoluminescence (PL). Upon excitation with 257 and 277 nm, respectively, Gd₂O₃:Eu³⁺ rods show a strong red emission line at around 611 nm. Furthermore, this novel method required a very short heating time, thus reducing the energy consumption.     

Exact results on cavity cooling in a system of a two-level atom and a cavity field

Using the algebraic dynamical method, this paper investigates the laser cooling of a moving two-level atom coupled to a cavity field. Analytical solutions of optical forces and the cooling temperatures are obtained. Considering Rb atoms as an example, it finds that the numerical results are relevant to the recent experimental laser cooling investigations.     

Solidification of a semitransparent planar layer subjected to radiative and convective cooling

This work deals with the analysis of solidification of a semi-transparent planar layer subjected to radiative and convective cooling. Isothermal mushy-zone model is considered. Enthalpy formulation of the energy equation is solved using the lattice Boltzmann method. To compare the results, the same equation is also solved using the fully implicit finite volume method. Discrete ordinate method is used to compute the radiative information in both the approaches. Effects of radiative properties such as the extinction coefficient, the scattering albedo and refractive index on the solid fraction and temperature are analyzed. Results are validated with those available in the literature. Lattice Boltzmann method and the discrete ordinate method were found to work satisfactorily.     

冷却速率对Lennard-Jones体系凝固过程中结构与动力学性质的影响

用分子动力学模拟方法研究了五种不同冷却速率对Lennard-Jones体系凝固过程中结构与动力学性质的影响。采用两种不同的方法来确定玻璃转变温度Tg,并且对结晶温度Tc、径向分布函数g(r)、均方位移函数MSD与扩散系数D、平均配位数进行比较分析。结果表明：冷却速率影响Lennard-Jones体系凝固过程中的结构。当使用足够高的冷却速率冷却时,体系发生玻璃化转变,而且冷却速率越快,玻璃转变温度越高;当冷却速率较小时,体系形成晶体,而且冷却速率越慢,结晶温度越高,结晶程度也越高。同时发现,冷却速率对扩散系数和平均配位数也有很大影响,二者在体系发生玻璃转变时都有一个缓变的过程,表明了过冷液相区的存在。     

Power ultrasound as a pretreatment to convective drying of mulberry (Morus alba L.) leaves: Impact on drying kinetics and selected quality properties

The effect of ultrasound pretreatment prior to convective drying on drying kinetics and selected quality properties of mulberry leaves was investigated in this study. Ultrasound pretreatment was carried out at 25.2–117.6 W/L for 5–15 min in a continuous mode. After sonication, mulberry leaves were dried in a hot-air convective dryer at 60 °C. The results revealed that ultrasound pretreatment not only affected the weight of mulberry leaves, it also enhanced the convective drying kinetics and reduced total energy consumption. The drying kinetics was modeled using a diffusion model considering external resistance and effective diffusion coefficient D_e and mass transfer coefficient h_m were identified. Both D_e and h_m during convective drying increased with the increase of acoustic energy density (AED) and ultrasound duration. However, D_e and h_m increased slowly at high AED levels. Furthermore, ultrasound pretreatment had a more profound influence on internal mass transfer resistance than on external mass transfer resistance during drying according to Sherwood numbers. Regarding the quality properties, the color, antioxidant activity and contents of several bioactive compounds of dried mulberry leaves pretreated by ultrasound at 63.0 W/L for 10 min were similar to that of mulberry leaves without any pretreatments. Overall, ultrasound pretreatment is effective to shorten the subsequent drying time of mulberry leaves without damaging the quality of final product.     

ZnO/ZrO2 nanocomposite: Sonosynthesis,characterization and its application for wastewater treatment

ZnO/ZrO₂ nanocomposites with different ZnO: ZrO₂ molar ratios (2:1, 1:1, and 1:2)were prepared by sol gel approach under ultrasonic irradiation. For preparation of the nano-composites, the ZnO gel was directly incorporated into the ZrO₂ gel at different molar ratios. The reaction mixture was stirred continuously for two days and then it was ultrasonoicated for 30 min. The filtrated composite gel was washed, and then calcinated at 300 °C in furnace for 3 h. X-ray powder diffraction patterns exhibited well-formed crystal structures and pure crystalline phases in the synthesized nanoparticles (NPs). The FT-IR analyses indicated that the positions of peaks related to Zn-O and Zr-O absorption bands did not change in nano-composites. In addition, FESEM images indicated uniform spherical morphology of the NPs. The highest photo-degradation performance of Congo red (as a model water pollutant) was obtained by 1:2molar ratio of ZrO₂: ZnO in the nano-composite. The particle size and band gap were considered as important factors on nano-catalysts performance. Furthermore, the effects of ultrasonic irradiation, pH, and the concentration of pollutant in solution were investigated on photocatalytic performance of optimum nanocomposite.     

磁感应强度和冷却速率对Tb_(0.27)Dy_(0.73)Fe_(1.95)合金凝固过程中取向行为的影响

实验研究了磁感应强度和冷却速率对Tb_(0.27)Dy_(0.73)Fe_(1.95)合金凝固过程中(Tb,Dy)Fe_2相取向行为及合金磁性能的影响.结果表明,将强磁场作用于Tb_(0.27)Dy_(0.73)Fe_(1.95)合金的凝固过程可以制备出(Tb,Dy)Fe_2相沿111取向的组织,同时显著提高了合金的磁致伸缩性能;通过提高磁感应强度可以在更快的冷却速率下得到111取向的组织;在4-10 T范围内,随着冷却速率的增加,(Tb,Dy)Fe_2相沿111取向所需的磁感应强度增加,而发生(110)取向的磁感应强度减小.随着冷却速率的增加,合金的饱和磁化强度增加,而强磁场的施加对合金饱和磁化强度的变化没有明显影响.(Tb,Dy)Fe_2相的取向行为受*Tb,Dy)Fe_3相取向行为的影响,且由磁晶各向异性能与磁场作用时间共同控制.     

Analysis and finite element simulation of electromagnetic heating in the nitride MOCVD reactor

Electromagnetic field distribution in the vertical metal organic chemical vapour deposition (MOCVD) reactor is simulated by using the finite element method (FEM). The effects of alternating current frequency, intensity, coil turn number and the distance between the coil turns on the distribution of the Joule heat are analysed separately, and their relations to the value of Joule heat are also investigated. The temperature distribution on the susceptor is also obtained. It is observed that the results of the simulation are in good agreement with previous measurements.