铜的催化褪色动力学-负吸光度法测定

以催化褪色动力学光度法测铜为例 ,对负吸光度法用于褪色法能提高准确度与灵敏度、扩展线性范围、减小共存离子干扰及操作简便规范等的原因进行了系统的研究 ;实例表明 ,间接摩尔吸光系数为1.71×107L·moL -1·cm -1,可测浓度范围为40～3600ng·L -1及相对标准偏差为0.8%(n=9) ,均明显优于用经典吸光度法测定 ,且催化温度降低 ,反应时间缩短并省去反应抑制剂 ,较原方法易于操作     

Analysis of thermal behaviour of high power semiconductor laser arrays by means of the finite element method (FEM)

New results of steady-state two-dimensional finite-element computations of temperature distributions of high power semiconductor laser arrays are presented. The influence of different thermal loads on the 2D temperature distribution in AlGaAs/GaAs gain-guided laser arrays is investigated. TheFEM model is tested by comparing it with analytical solutions. For numerical convenience, the latter is rewritten in a novel form, which is free of overflow problems. The maximum temperatures calculated by both methods agree within 1%. Several factors determining the thermal resistance of the device are quantitatively examined: the ratio of light emitting to non-emitting areas along the active zone, the amount of Joule losses, the current spreading, the solder thickness, and voids in the solder. This yields design rules for optimum thermal performance.     

Non-stoichiometry of YBa2Cu3O7-d Observed by Repeated Temperature Scanning

Repeated temperature scanning method was applied to observe non-stoichiometry of YBa₂Cu₃O₇-d, and interesting results were obtained. Two simultaneously occurring processes were separately observed in mass change; one is a fast process and the other is slow, so that their responses to the temperature change are quite different from each other. The fast process follows the cyclic temperature change, but the slow process is observed to be a gradual mass change. Kinetic behaviors of these two processes are also made clear by plotting the mass vs. the temperature. Furthermore, a hysteresis loop was observed in the plot of the mass vs. the temperature in a high temperature range presumably due to the third process, and it depends on the heating and cooling rates. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dynamic headspace liquid-phase microextraction of alcohols

A method was developed using dynamic headspace liquid-phase microextraction and gas chromatography-mass spectrometry for extraction and determination of 9 alcohols from water samples. Four different solvents, hexyl acetate, n-octanol, o-xylene and n-decane were studied as extractants. The analytes were extracted using 0.8 microl of n-octanol from the headspace of a 2 ml sample solution. The effect of sampling volume, solvent volume, sample temperature, syringe plunger withdrawal rate and ionic strength of the solution on the extraction performance were studied. A semiautomated system including a variable speed stirring motor was used to ensure a uniform movement of syringe plunger through the barrel. The method provided a fairly good precision for all compounds (5.5-9.3%), except methanol (16.4%). Detection limits were found to be between 1 and 97 microg/l within an extraction time of approximately 9.5 min under GC-MS in full scan mode.     

选相原位法合成立方氮化硼的关键影响因素

利用选相原位法在水溶液中成功制备出了立方氮化硼晶体，对反应条件进行了优化。结果表明，利用选相原位法合成立方氮化硼的最佳实验条件是：反应压力为10.0 MPa，在氯离子加入下利用混合氮源进行反应。在该条件下得到了纯相的立方氮化硼晶体。     

离子交换-原子捕集-火焰原子吸收光谱法测定水中的超痕量镍

在文中所述条件下,镍的原子捕集灵敏度较常规法高320倍,即在离子交换法浓缩仅40倍的情况下,可使镍的测定灵敏度提高12800倍,从而成功实现了ppt级超痕量镍的测定。     

A Polymeric Iodiplumbate(Ⅱ) Templated by Conjugated Quaternary Ammonium: Synthesis, Band Structure and Optical Properties

A new lead(Ⅱ) iodide coordination polymer [(npq)(PbI3)]n 1 (npq = N-propyl- quinolinium) has been synthesized in the presence of npq as structure-directing reagent (SDA). Compound 1 crystallizes in the orthorhombic system, space group Pbca, with a = 19.158(4), b = 7.9909(16), c = 22.929(5) (A), V = 3510.2(12) (A)3, Z = 8, Dc = 2.877 g/cm3, F(000) = 2672, C12H14I3NPb, Mr = 760.14, μ(MoKα) = 14.872 mm-1, the final R = 0.0431 and wR = 0.1021 for 3678 observed reflections with I＞2σ(I). Structure determination indicates that the [PbI3]-n infinite chains in each unit cell shape the sketch of 1, which could be described as the result of face-sharing distorted PbI6 octahedra running along the b axis. Electrostatic interaction between conjugated organic counter-cations and inorganic moieties presents and contributes to the crystal packing. 1 was further characterized with IR and elemental analysis. Based on the crystal structure data, quantum chemical calculation with DFT method was used to reveal the electronic structure and optical property of 1.     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Selective synthesis of di(propen-1-yl)sulfone and di(propen-1-yl)sulfoxide

Convenient selective methods of synthesis of the title compounds, based on oxidation of di(propen-1-yl)sulfide with 30% H₂O₂, have been developed.Institute of Organic Chemistry, Siberian Branch, Russian Academy of Sciences, 664033 Irkutsk. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 675–679, March, 1992.     

微分方法在聚苯骈咪唑修饰电极溶出伏安分析研究中的应用

本文推导了聚苯骈咪唑修饰电极溶出伏安分析中电流对电位的二次方程，并以Ｆｅ（Ｃ２Ｏ４）＾２－３为研究对象，对该方程进行了实验验证，实验结果与理论相吻合。