高效液相色谱-串联质谱法测定小鼠组织中的新型抗心力衰竭化合物AF-HF001

建立了基于高效液相色谱-质谱联用技术的新型抗心力衰竭化合物AF-HF001在小鼠组织中的测定方法,并考察了其在小鼠体内的组织分布。采用液-液萃取对样品进行预处理,以Thermo Hypersil Gold C18色谱柱进行分离,流动相为乙腈-0.1%甲酸水溶液,梯度洗脱,采用选择性反应监测(SRM)正离子模式检测分析物。小鼠组织中AF-HF001含量在0.5~10μg/mL范围内线性关系良好(r>0.996),在加标量为1.5,4,10μg/mL的组织样品中,提取回收率大于58%,基质效应在100.38%~109.99%之间,日内和日间精密度RSD均小于15%。该方法为AF-HF001的体内分布研究及进一步药物研发提供了依据。初步结果表明,该化合物能够迅速到达心脏并迅速代谢,主要分布在肝脏组织中,其他组织中分布较少。     

Microscale sample deposition onto hydrophobic target plates for trace level detection of neuropeptides in brain tissue by MALDI-MS

A sample preparation method that combines a modified target plate with a nanoscale reversed-phase column (nanocolumn) was developed for detection of neuropeptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A gold-coated MALDI plate was modified with an octadecanethiol (ODT) self-assembled monolayer to create a hydrophobic surface that could concentrate peptide samples into a approximately 200-500-microm diameter spot. The spot sizes generated were comparable to those obtained for a substrate patterned with 200-microm hydrophilic spots on a hydrophobic substrate. The sample spots on the ODT-coated plate were 100-fold smaller than those formed on an unmodified gold plate with a 1-microl sample and generated 10 to 50 times higher mass sensitivity for peptide standards by MALDI-TOF MS. When the sample was deposited on an ODT-modified plate from a nanocolumn, the detection limit for peptides was as low as 20 pM for 5-microl samples corresponding to 80 amol deposited. This technique was used to analyze extracts of microwave-fixed tissue from rat brain striatum. Ninety-eight putative peptides were detected including several that had masses matching neuropeptides expected in this brain region such as substance P, rimorphin, and neurotensin. Twenty-three peptides had masses that matched peaks detected by capillary liquid chromatography with electrospray ionization MS.     

食品中化学性有害物的质谱软电离裂解规律及筛查技术研究进展

食品中化学性有害物是导致食品安全问题的重要原因，质谱是对食品中化学性有害物进行定性定量分析的有效方法。该文按照化合物结构类别，综述了食品中重要化学性有害物的质谱软电离裂解机理，包括农药、兽药、真菌毒素，以及其他化学污染物。对于每类化合物，重点综述化合物质谱裂解产生的特征碎片、中性丢失等，以及这些质谱软电离裂解机理在食品中化学性有害物筛查及发现中的应用。研究化合物的质谱裂解机理可以帮助研究者对化合物进行结构解析和结构确证，为食品中同类结构新型化学性有害物的发掘提供理论依据。     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002     

Low-molecular-weight photoresponsive supramulecular hydrogel based on a dicationic azobenzene-bridged pyridinium hydrogelator

Photoresponsive supramolecular hydrogel was fabricated from a small azobenzene-bridged dicationic pyridinium salt in the aqueous solution. The UV-vis light triggered reversible gel-sol transformation of such low-molecular-weight supramolecular hydrogel was systematically investigated through various analytical techniques.     

增强实验室X激光的亮度

实验室X激光已经取得重大进展,但均属自发辐射放大,缺乏模式限制的措施,故激光功率分散在多横模中,提高激光亮度的措施之一是模式限制.由于X光多层膜一般为高吸收膜,用以形成谐振腔作模式限制看来是困难的.本文建议采用相距足够远的二段激光等离子体作同步延迟行波放大来进行横模限制.分析表明,达到衍射极限的单横模X激光是可能的,这对X光全息术以及高亮度X激光的实现是十分重要的.本文还建议改变一般采用的产生线状等离子体的光学系统设计,使激光功率密度在长线上达到均匀;认为过去的光学系统不良是长焦线时,X激光增益-长度乘积低的一个可能原因.     

ORGANIC GEOCHEMISTRY OF ARTIFICIALLY HEATED SPHAGNUM COAL CONSIDERED AS POSSIBLE SOURCE ROCK FOR OIL AND GAS

A preliminary study of simulated thermal maturity has been conducted to evaluate the oil, gas and hydrocarbon generation potential of sphagnum coal in the Jinsuo brown coal basin, Yunnan Province and to understand the characteristics of the element composition and biomarkers in the course of thermal alteration. The experimental result was compared with that of xylitic coal, a kind of lithotype of soft brown coal. It is considered that sphagnum coal possesses the potential of forming economic accumulation of oil and gas. Its highest proportion of oil and hydrocarbon generation is 510 mg/g Corg. and 232.1 mg/g Corg. respectively. At an R_(ran)~° value of 2.51%, the ratio of gas generation from sphagnum coal attains to 620.5 ml/g Corg. In view of sphagnum coal being different from the conventional soft brown coal in various respects such as coal forming raw materials and enviroments as well as physico-chemical properties, it is Suggested as a special kind of source rock for coal-generated oil and gas.     

Influence of media nutrients on synthesis of lignin peroxidase from Aspergillus sp

The effect of carbon and nitrogen sources, lignocellulosic substrates, and metal ions on lignin peroxidase (LiP) activity of Aspergillus sp., which was isolated from a mangrove area, was studied. Glucose (1%) was found to be the best carbon source. Among the various lignocellulosic substrates used, coir pith at 3% concentration increased LiP activity twofold on the second day of incubation. Peptone and KNO₃ completely inhibited the enzyme synthesis while (NH₄)₂SO₄ at 12.5 mM produced maximum activity. Since seawater contained all the requisite metal ions, any added ions had a negative effect on activity. Cu²⁺ had the most inhibiting effect while K⁺ the least. When all the optimized conditions were provided, in nitrogen- and carbon-sufficient medium, a maximum LiP activity of 345 U/mL was obtained on the second day of incubation.     

Microrobotics and MEMS-based fabrication techniques for scaffold-based tissue engineering

Scaffold based tissue engineering strategies use cells, biomolecules and a scaffold to promote the repair and regeneration of tissues. Although scaffold-based tissue engineering approaches are being actively developed, most are still experimental, and it is not yet clear what defines an ideal scaffold/cell construct. Solid free form fabrication (SFF) techniques can precisely control matrix architecture (size, shape, interconnectivity, branching, geometry and orientation). The SFF methods enable the fabrication of scaffolds with various designs and material compositions, thus providing a control of mechanical properties, biological effects and degradation kinetics. This paper reviews the application of micro-robotics and MEMS-based fabrication techniques for scaffold design and fabrication. It also presents a novel robotic technique to fabricate scaffold/cell constructs for tissue engineering by the assembly of microscopic building blocks.