Chemical studies on the anobiidae: Sex pheromone of the drugstore beetle, stegobium paniceum (L.) (coleoptera)

Chemical an spectroscopic evidence is presented to show that 2,3-dihydro-2,3,5-trimethyl-6-(1-methyl-2-oxobutyl)-4H-pyran-4-one (10) is the sex pheromone produced by the female drugstore beetle, Stegobium paniceum L.     

Isocyanide addition to MN2(CO)5(Ph2PCH2PPh2)2 and the formation of a four-electron doubly-bridging isocyanide

The reactions of Fe(CO)₅, Fe(CO)₄P(C₆H₅)₃, M(CO)₆ (M  W, Mo, Cr), and (CH₃C₅H₄Mn(CO)₃ with KH and several boron and aluminium hydrides were investigated. Iron pentacarbonyl was converted quantitatively to K⁺Fe(CO)₄-(CHO) by hydride transfer from KBH(OCH₃)₃ allowing isolation of [P(C₆H₅)₃]₂-Nⁿ⁺Fe(CO)₄(CHO)^? in 50% yield. Lower yields were obtained with LiBH(C₂H₅)₃, and other hydride sources gave little or no formyl product. The stability of Fe(CO)₄(CHO)^? in THP was found to depend on the cation, decreasing in the order [P(C₆H₅)₃]₂N⁺ > K⁺ > Na⁺ > Li⁺. No formyl complexes were isolated and no spectroscopic evidence for formyl formation was observed in the reactions of the other transition metal carbonyls with several hydride sources. Fe(CO)₄-P(C₆H₅)₃ gave K₂Fe(CO)₄ when treated with KHB(OCH₃)₃. When treated with LiBH(C₂H₅)₃, W(CO)₆ gave a mixture of HW₂(CO)₁₀^?and (OC)₅W(COC₂H₅)^?; the latter was methylated to give the carbene complex (OC)₅WC(OCH₃)C₂H₅.     

Flow Injection Chemiluminescence for the Determination of Estriol via a Noncompetitive Enzyme Immunoassay

A novel approach to the detection of estriol using a flow injection system coupled to enhanced chemiluminescent immunoassay was developed based on noncompetitive immunoassay formats. A conjugated estriol-ovalbumin immobilized immunoaffinity column was inserted into the flow system to trap the unbound horseradish peroxidase (HRP)-labeled antibody after an off-line incubation of estriol and HRP-labeled anti-estriol antibody. The trapped enzyme conjugate was detected by the injection of chemiluminescent substrates to produce enhanced chemiluminescence. The linear range for the determination of estriol is 10.0 to 400 ng · mL⁻¹ with a correlation coefficient of 0.996 and a detection limit of 5.0 ng · mL⁻¹. The total time for sampling and chemiluminescent detection of one sample is 400 seconds after 30 min of pre-incubation. The results for pregnancy serum samples obtained by this method are in good agreement with those obtained using ELISA.     

Iron(III) chloride catalysed three-component Grieco condensation: Synthesis of tetrahydropyrido[2′,3′:3,4]pyrazolo[1,5-a]pyrimidines/quinazolines

Three-component Grieco condensation reaction of 3-aminopyrazolo[3,4-b]pyridine, formaldehyde/benzaldehyde and electron rich alkenes in presence of iron(III) chloride gave tetrahydropyrido[2′,3′:3,4]pyrazolo[1,5-a]pyrimidines/quinazolines in single pot. The sequence of reactions is formation of di-azadiene in situ and the subsequent regioselective addition of alkenes in aza-Diels Alder type reaction. The structure and stereochemistry of the products were confirmed by spectral data and single crystal X-ray crystallography.     

Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.     

Kinetic-potentiometric assay of formaldehyde in pharmaceutical and industrial samples, monitored by copper solid ion selective electrode, after its reaction with the copper(II)-bis-(ethylenediamine) complex

A kinetic-potentiometric method is described for the quantitative assay of formaldehyde (HCHO) in pharmaceutical and industrial preparations. It is based on the reaction of HCHO with (ethylenediamine)-Cu(II)-sulfate [Cu(CH₂NH₂)₂(H₂O)₂] · SO₄. The changes in potential, resulting from the release of the Cu(II) cations, are monitored with a Cu(II)-ion selective electrode. The calibration curve for the HCHO is linear in the concentration range 50–250 mg L⁻¹, with a limit of detection of 8.5 mg L⁻¹. The method shows very good reproducibility with an RSD of 2.6% for successive injections (n = 5) of 150 mg L⁻¹ HCHO primary solution, while it is interference free. The method was successfully tested in various industrial and pharmaceutical preparations.     

Nanometer-sized zirconium dioxide microcolumn separation/preconcentration of trace metals and their determination by ICP-OES in environmental and biological samples

A new method is proposed using a microcolumn (20 mm × 2.0 mm) packed with nanometer-sized zirconia as solid-phase extractor for the separation/preconcentration of Mn, Cu, Cr, Zn, Ni and Co prior to their determination by inductively coupled plasma optical emission spectrometer (ICP-OES) in environmental samples. The factors affecting the separation and preconcentration of analytes such as pH, sample flow rate and volume, eluent concentration and volume were determined, interfering ions were studied, and the optimal experimental conditions were established. The adsorption capacity of nanometer-sized ZrO₂ for Mn, Cu, Cr, Zn, Ni and Co was found to be 1.3, 1.3, 1.7, 2.0, 3.9 and 1.5 mg g⁻¹, respectively. The detection limits of the method were 12, 58, 24, 2, 7 and 36 ng L⁻¹, respectively, with a preconcentration factor of 25. The precision of this method was 1.7% (Mn), 2.9% (Cu), 5.9% (Mn), 3.8% (Mn), 6.2% (Mn) and 4.3% (Mn) with 9 determinations of 10 ng mL⁻¹ of target analytes, respectively. The method was successfully applied to the determination of trace metals in lake water, dried fish samples, certified reference materials of human hair and milk, and provided satisfactory results.     

Developments on carbon dioxide reduction: Their promise,achievements, and challenges

CO₂ reduction processes continue to be developed for electrosynthesis, energy storage applications, and environmental remediation. A number of promising materials have shown high activity and selectivity to target reduction products. However, the progress has been mainly at a small laboratory scale, and the technical challenges of large scale CO₂ reduction have not been considered adequately. This review covers recent advancements in catalyst materials and cell designs. The leading materials for CO₂ reduction to a number of useful products are presented with their corresponding cell and reactor designs. The latest efforts to progress to industrially relevant scales are discussed, along with the challenges that must be met for carbon dioxide reduction to be a viable route for mass scale production.     

Structures and stability of N7+ and N7− clusters

Ab initio molecular orbital theory and density functional theory have been used to study nine isomers of N₇ ionic clusters with low spin at the HF/6-31G*, MP2/6-31G*, B3LYP/6-31G*, and B3LYP/6-311(+)G* levels of theory. All stationary points are examined with harmonic vibrational frequency analyses. Four N₇ ⁺ isomers and five N₇ ⁻ isomers are determined to be local minima or very close to the minima on their potential-energy hypersurfaces, respectively. For N₇ ⁺ and N₇ ⁻, the energetically low lying isomers are open-chain structures (C _{2 v} and C _{2 v} or C₂). The results are very similar to those of other known odd-number nitrogen ions, such as N₅ ⁺, N₉ ⁺, and N₉ ⁻, for which the open-chain structures are also the global minima. This research suggests that the N₇ ionic clusters are likely to be stable and to be potential high-energy-density materials if they could be synthesized. Received: 16 July 2001 / Accepted: 8 October 2001 / Published online: 21 January 2002     

A comparative molecular field analysis (CoMFA) study using semiempirical, density functional, ab initio methods and pharmacophore derivation using DISCOtech on sigma 1 ligands

The Comparative Molecular Field Analysis (CoMFA) was developed to investigate a three-dimensional quantitative structure activity relationship (3D-QSAR) model of ligands for the sigma 1 receptor. The starting geometry of sigma-1 receptor ligands was obtained from the Tripos force field minimizations and conformations were decided from DISCOtech using the SYBYL 6.8. program. The structures of 48 molecules were fully optimized at the ab initio HF/3-21G* and semiempirical AM1 calculations using GAUSSIAN 98. The electrostatic charges were calculated using several methods such as semiempirical AM1, density functional B3LYP/3-21G*, and ab initio HF/3-21G*, MP2/3-21G* calculations within GAUSSIAN 98. Using the optimized geometries, the CoMFA results derived from the HF/3-21G method were better than those from AM1. The best CoMFA was obtained from HF/3-21G* optimized geometry and charges (R2 = 0.977). Using the optimized geometries, the CoMFA results derived from the HF/3-21G methods were better than those from AM1 calculations. The training set of 43 molecules gave higher R2 (0.989-0.977) from HF/3-21G* optimized geometries than R2 (0.966-0.911) values from AM1 optimized geometries. The test set of five molecules also suggested that HF/3-21G* optimized geometries produced good CoMFA models to predict bioactivity of sigma 1 receptor ligands but AM1 optimized geometries failed to predict reasonable bioactivity of sigma 1 receptor ligands using different calculations for atomic charges.