Comparative molecular field analysis of artemisinin derivatives: Ab initio versus semiempirical optimized structures

Based on the belief that structural optimization methods, producing structures more closely to the experimental ones, should give better, i.e. more relevant, steric fields and hence more predictive CoMFA models, comparative molecular field analyses of artemisinin derivatives were performed based on semiempirical AM1 and HF/3-21G optimized geometries. Using these optimized geometries, the CoMFA results derived from the HF/3-21G method are found to be usually but not drastically better than those from AM1. Additional calculations were performed to investigate the electrostatic field difference using the Gasteiger and Marsili charges, the electrostatic potential fit charges at the AM1 level, and the natural population analysis charges at the HF/3-21G level of theory. For the HF/3-21G optimized structures no difference in predictability was observed, whereas for AM1 optimized structures such differences were found. Interestingly, if ionic compounds are omitted, differences between the various HF/3-21G optimized structure models using these electrostatic fields were found.     

Structures and energies of D-galactose and galabiose conformers as calculated by ab initio and semiempirical methods

Optimized geometries and total energies of some conformers of alpha- and beta-D-galactose have been calculated using the RHF/6-31G* ab initio method. Vibrational frequencies were computed at the 6-31G* level for the conformers that favor internal hydrogen bonding, in order to evaluate their enthalpies, entropies, Gibbs free energies, and then their structural stabilities. The semiempirical AM1, PM3, MNDO methods have also been performed on the conformers GG, GT, and TG of alpha- and beta-D-galactose. In order to test the reliability of each semiempirical method, the obtained structures and energies from the AM1, PM3, and MNDO methods have been compared to those achieved using the RHF/6-31G* ab initio method. The MNDO method has not been investigated further, because of the large deviation in the structural parameters compared with those obtained by the ab initio method for the galactose. The semiempirical method that has yielded the best results is AM1, and it has been chosen to perform structural and energy calculations on the galabiose molecule (the disaccharides constituted by two galactose units alpha 1,4 linked). The goal of such calculations is to draw the energy surface maps for this disaccharide. To realize each map, 144 different possible conformations resulting from the rotations of the two torsional angles psi and phi of the glycosidic linkage are considered. In each calculation, at each increment of psi and phi, using a step of 30 degrees from 0 to 330 degrees, the energy optimization is employed. In this article, we report also calculations concerning the galabiose molecule using different ab initio levels such as RHF/6-31G*, RHF/6-31G**, and B3Lyp/6-31G*.     

Intermolecular Interaction of HMX： an Application of ONIOM Methodology

IntroductionExtensive studies on intermolecular interac-tions have been made in the past decades due totheir importance in a wide range of physical,chem-ical and biological fields.Researches on the weakintermolecular interactions began with hydrogenbonds.Scheiner summarized the ab initio investiga-tions on hydrogen bonding in detail[1] .With the abinitio method supermolecular structures and bind-ing energies can be predicted notonly for H- bondedsystems but also for other systems[2 _ 5] when …     

Semiempirical PM5 molecular orbital study on chlorophylls and bacteriochlorophylls: comparison of semiempirical, ab initio, and density functional results

The semiempirical PM5 method has been used to calculate fully optimized structures of magnesium-bacteriochlorin, magnesium-chlorin, magnesium-porphin, mesochlorophyll a, chlorophylls a, b, c(1), c(2), c(3), and d, and bacteriochlorophylls a, b, c, d, e, f, g, and h with all homologous structures. Hartree-Fock/6-31G* ab initio and density functional B3LYP/6-31G* methods were used to optimize structures of methyl chlorophyllide a, chlorophyll c(1), and methyl bacteriochlorophyllides a and c for comparison. Spectroscopic transition energies of the chromophores and their 1:1 or 1:2 solvent complexes were calculated with the Zindo/S CIS method. The self-consistent reaction field model was used to estimate solvent shifts. The PM5 calculations predict planar structure of the porphyrin ring and central position of the four coordinated magnesium atoms in all pigments studied, in accord with the experimental, ab initio, and density functional results, a significant improvement as compared to the older semiempirical PM3 approach. Only small differences in PM5 and B3LYP/6-31G* or Hartree-Fock/6-31G* minimum energy geometries of the reference molecules were observed. Calculations show that in 1:1 solvent complexes, where the magnesium atom is five coordinated, the magnesium atom is shifted out of the plane of the porphyrin ring towards the solvent molecule, while the hexa coordinated 1:2 complexes are again planar. The PM5 method gives atomic charges that are comparable with those obtained from the Hartree-Fock/6-31G* and B3LYP/6-31G* calculations. The single point ZINDO/S CIS calculations with PM5 minimum energy structure gave excellent correlations between calculated and experimental transition energies of the chlorophylls and bacteriochlorophylls studied. Such correlations may be used for prediction of transition energies of the chromophores in protein binding sites. Calculations also predict existence of dark electronic states below the main Soret absorption band in all chromophores studied. The results suggest that the semiempirical PM5 method is a fairly reliable and computationally efficient method in predicting molecular parameters of porphyrin-like molecules.     

Computational structural determination and energy landscape analysis of the hepatic carcinogen 2-(acetylamino)fluorene

 2-(Acetylamino)fluorene (AAF), a potent mutagen and a prototypical example of the mutagenic aromatic amines, forms covalent adducts to DNA after metabolic activation in the liver. A benchmark study of AAF is presented using a number of the most widely used molecular mechanics and semiempirical computational methods and models. The results are compared to higher-level quantum calculations and to experimentally obtained crystal structures. Hydrogen bonding between AAF molecules in the crystal phase complicates the direct comparison of gas-phase theoretical calculations with experiment, so Hartree–Fock (HF) and Becke–Perdew (BP) density functional theory (DFT) calculations are used as benchmarks for the semiempirical and molecular mechanics results. Systematic conformer searches and dihedral energy landscapes were carried out for AAF using the SYBYL and MMFF94 molecular mechanics force fields; the AM1, PM3 and MNDO semiempirical quantum mechanics methods; HF using the 3-21G*and 6-31G* basis sets; and DFT using the nonlocal BP functional and double numerical polarization basis sets. MMFF94, AM1, HF and DFT calculations all predict the same planar structures, whereas SYBYL, MNDO and PM3 all predict various nonplanar geometries. The AM1 energy landscape is in substantial agreement with HF and DFT predictions; MMFF94 is qualitatively similar to HF and DFT; and the MNDO, PM3 and SYBYL results are qualitatively different from the HF and DFT results and from each other. These results are attributed to deficiencies in MNDO, PM3 and SYBYL. The MNDO, PM3 and SYBYL models may be unreliable for compounds in which an amide group is immediately adjacent to an aromatic ring. Received: 26 May 2002 / Accepted: 12 December 2002 / Published online: 14 February 2003     

Study of hydrogen bonding interactions relevant to biomolecular structure and function

Ab initio molecular orbital calculations were used to study hydrogen bonding interactions and interatomic distances of a number of hydrogen bonded complexes that are germane to biomolecular structure and function. The calculations were carried out at the STO-3G, 3-21G, 6-31G*, and MP2/6-31G* levels (geometries were fully optimized at each level). For anionic species, 6-31 + G* and MP2/6-31 + G* were also used. In some cases, more sophisticated calculations were also carried out. Whenever possible, the corresponding enthalpy, entropy, and free energy of complexation were calculated. The agreement with the limited quantity of experimental data is good. For comparison, we also carried out semiempirical molecular orbital calculations. In general, AM1 and PM3 give lower interaction enthalpies than the best ab initio results. With regard to structural results, AM1 tends to favor bifurcated structures for O? H-O and N? HO types of hydrogen bonds, but not for hydrogen bonds involving O-H? S and S-H? O, where the usual hydrogen bond patterns are observed. Overall, AM1 geometries are in general in poor agreement with ab initio structural results. On the other hand, PM3 gives geometries similar to the ab initio ones. Hence, from the structural point of view PM3 does show some improvement over AM1. Finally, insights into the formation of cyclic or open formate–water hydrogen bonded complexes are presented. © 1992 by John Wiley & Sons, Inc.     

Computational studies of the structure and vibrational spectra of hexafluorodisilane

Ab initio calculations predict that D_3d symmetry of Si₂F₆ is more stable than D_3h symmetry. The calculated potential barrier to internal rotation was 0.77, 0.73 and 0.78 kcal/mol using HF/6-31G*, B3LYP/6-31G* and MP2/6-31G* methods respectively, which was in good agreement with the experimental value between 0.51±0.10 and 0.73±0.14 kcal/mol. The optimized geometries, harmonic force fields, infrared intensities, Raman activities, and vibrational frequencies are reported for D_3d symmetry of Si₂F₆ from HF/6-31G* and B3LYP/6-31G*. A normal coordinate analysis was carried out. The average error between the scaled DFT frequencies obtained from the B3LYP/6-31G* calculation and observed frequencies was 4.2 cm⁻¹ and the average error between the scaled HF and observed frequencies was 2.2 cm⁻¹.     

Atomic charges derived from a fast and accurate method for electrostatic potentials based on modified AM1 calculations

Atomic charges derived from a recently described approach to the very rapid computation of AM1 electrostatic potentials (ESP) accurately parallel, but are ca. 20% smaller than, the corresponding HF/6-31G* values. The dipole moments computed from the AM1 charges are virtually identical to those derived directly from the wave function and in rather better agreement with the experimental values than those computed using the HF/6-31G* charges. Unlike other approaches to the semiempirical calculation of ESP-derived charges, the present method also yields near HF/6-31G* quality potentials close to the molecular periphery. For medium-sized organic molecules (40-100 basis functions), the method is approximately two orders of magnitude faster than those involving prior deorthogonalization of AM1 wave function and explicit computation of the full ESP integral matrix. © 1994 by John Wiley & Sons, Inc.     

脂肪醇的生物毒性与结构参数的相关性研究

应用量子化学从头算HF/3-21G方法得到了14种脂肪醇分子的优势构象,利用HF/3-21G法和分子图形学技术获得其电子结构、几何结构参数和连接性指数,并将这些参数与脂肪醇对番茄和红蜘蛛的毒性相关联.结果表明,脂肪醇对番茄的生物毒性与一阶分子连接性指数1X和羟基电荷QOH之间存在良好的二元线性相关性,而脂肪醇对红蜘蛛的生物毒性与一阶分子连接性指数1X和分子最高已占轨道能EH之间存在良好的二元线性相关性,成功地建立脂肪醇对番茄和红蜘蛛毒性的构效关系式.     

Proton affinities of molecules containing nitrogen and oxygen: comparing ab initio and semiempirical results to experiments

We report a comparison of theoretical and experimental proton affinities at nitrogen and oxygen sites within a series of small molecules. The calculated proton affinities are determined using the semiempirical methods AM 1, MNDO , and PM 3; the ab initio Hartree–Fock method at the following basis levels: 3-21G //3-21G , 3-21+G //3-21G , 6-31G *//6-31G *, and 6-31+G (d, p)//6-31G *; and Møller–Plesset perturbation calculations: MP 2/6-31G *//6-31G *, MP 3/6-31G *//6-31G *, MP 2/6-31G +(d, p)//6-31G *, MP 3/6-31G +(d, p)//6-31G *, and MP 4(SDTQ )/6-31G +G (d, p)//6-31G *. The semiempirical methods have more nonsystematic scatter from the experimental values, compared to even the minimal 3-21G level ab initio calculations. The thermodynamically corrected 6-31G *//6-31G * proton affinities provide acceptable results compared to experiment, and we see no significant improvement over 6-31G *//6-31G * in the proton affinities with any of the higher-level calculations. © 1992 John Wiley & Sons, Inc.     

NH3…H2O体系氢键团簇结构的从头计算方案比较

对H2O，NH3单分子以及反式线性NH3…H2O双分子团簇应用HF，DFT，MR2，CCD ，QCISD等从头计算方法在不同的基组水平上进行几何结构优化和氨—水分子间相 互作用能计算。比较实验值和计算结果表明：对氨—水体系，MP2／6-31+G^**方法 能够满足氢键N-0键长误差为0．004nm，键角∠NOH误差为1°，NH3…H2O相互作用 能△E与CCD和QCISD偏差2．1kJ／mol计算精度的要求，并有较合理的计算代价。     

On the use of AM1 and MNDO wave functions to compute accurate electrostatic charges

A new strategy to evaluate accurate electrostatic charges from semiempirical wave functions is reported. The rigorous quantum mechanical molecular electrostatic potentials computed from both MNDO and AM1 wave functions are fitted to the point-charge molecular electrostatic potential to obtain the electrostatic charges. The reliability of this strategy is tested by comparing the semiempirical electrostatic charges for 21 molecules with the semiempirical Mulliken charges and with the ab initio STO-3G and 6-31G* electrostatic charges. The ability of the dipoles derived from the semiempirical electrostatic and Mulliken charges as well as from the SCF charge distributions to reproduce the ab initio 6-31G* electrostatic dipoles and the gas phase experimental values is determined. The statistical analysis clearly point out the goodness of the semiempirical electrostatic charges, specially when the MNDO method is used. The excellent relationships found between the MNDO and 6-31G* electrostatic charges permit to define a scaling factor which allows to accurately reproduce the 6-31G* electrostatic charge distribution as well as the experimental dipoles from the semiempirical electrostatic charges.     

Are AM1 ligand‐protein binding enthalpies good enough for use in the rational design of new drugs?

We have examined the performance of semiempirical quantum mechanical methods in solving the problem of accurately predicting protein-ligand binding energies and geometries. Firstly, AM1 and PM3 geometries and binding enthalpies between small molecules that simulate typical ligand-protein interactions were compared with high level quantum mechanical techniques that include electronic correlation (e.g., MP2 or B3LYP). Species studied include alkanes, aromatic systems, molecules including groups with hypervalent sulfur or with donor or acceptor hydrogen bonding capability, as well as ammonium or carboxylate ions. B3LYP/6-311+G(2d,p) binding energies correlated very well with the BSSE corrected MP2/6-31G(d) values. AM1 binding enthalpies also showed good correlation with MP2 values, and their systematic deviation is acceptable when enthalpies are used for the comparison of interaction energies between ligands and a target. PM3 otherwise gave erratic energy differences in comparison to the B3LYP or MP2 approaches. As one would expect, the geometries of the binding complexes showed the known limitations of the semiempirical and DFT methods. AM1 calculations were subsequently applied to a test set consisting of "real" protein active site-ligand complexes. Preliminary results indicate that AM1 could be a valuable tool for the design of new drugs using proteins as templates. This approach also has a reasonable computational cost. The ligand-protein X-ray structures were reasonably reproduced by AM1 calculations and the corresponding AM1 binding enthalpies are in agreement with the results from the "small molecules" test set.     

Si~2Cl~6分子的内旋转能垒和振动基频的理论研究

用从头算方法HF/6-31G^*^*和密度函方法B3LYP/6-31G^*^*,对Si~2Cl~6分子的平衡几何构型进行优化,优化的结果与实验结果吻合得较好.并用上述两种不同的方法计算Si~2Cl~6分子的内旋转能垒,结果分别为8.786和6.694kJ/mol,其中DFT方法的计算结果与实验结果4.18kJ/mol吻合得较好.对Si~2Cl~6分子的振动基频进行计算.用HF/6-31G^*^*SQM力场所计算的频率理论值与实验值的平均误差为7.3cm^-^1,用B3LYP/6-31G^*^*未标度的力场所计算的频率理论值与实验值的平均误差为6.0cm^-^1.该密度泛函方法(B3LYP/~6-31G^*^*)的理论计算值比用HF/6-31G^*^*标度后的SQM力场计算的频率与实验值(除Si--Si键扭转振动基频之外的11条振动基频)吻合得更好.并给出了Si--Si键扭转振动基频的预测值。     

A combined semiempirical-DFT study of oligomers within the finite-chain approximation, evolution from oligomers to polymers

A computationally cheap approach combining time-independent density functional theory (TIDFT) and semiempirical methods with an appropriate extrapolation procedure is proposed to accurately estimate geometrical and electronic properties of conjugated polymers using just a small set of oligomers. The highest occupied molecular orbital-lowest unoccupied molecular orbital gap (HLG) obtained at a TIDFT level (B3PW91) for two polymers, trans-polyacetylene--the simplest conjugated polymer, and a much larger poly(2-methoxy-5-(2,9-ethyl-hexyloxy)-1,4-phenylenevinylene (MEH-PPV) polymer converge to virtually the same asymptotic value than the excitation energy obtained with time-dependent DFT (TDDFT) calculations using the same functional. For TIDFT geometries, the HLG is found to converge to a value within the experimentally accepted range for the band gap of these polymers, when an exponential extrapolation is used; however if semiempirical geometries are used, a linear fit of the HLG versus 1/n is found to produce the best results. Geometrical parameters are observed to reach a saturation value in good agreement with experimental information, within the length of oligomers calculated here and no extrapolation was considered necessary. Finally, the performance of three different semiempirical methods (AM1, PM3, and MNDO) and for the TIDFT calculations, the performance of 7 different full electron basis sets (6-311+G**, 6-31+ +G**, 6-311+ +G**, 6-31+G**, 6-31G**, 6-31+G*, and 6-31G) is compared and it is determined that the choice of semiempirical method or the basis set does not significantly affect the results.     

异硫氰酸与甲亚胺环加成反应机理的理论研究

对异硫氰酸与甲亚胺形成四元或六元环产物的环加成反应进行了理论研究,结果表明,一分子异硫氰酸与一分子甲亚胺形成四元环(1:1)产物P1的反应(1)为经过一个两性离子中间体的分步反应,其中第二步为速控步骤,其活化热垒为107.86kJ/mol.此外,反应(1)的中间体还可与另一甲亚胺或异硫氰酸分子继续反应形成两个不同的六元环(1:2或2:1)产物P2或P3;这两个反应均为协同反应,其活化势垒分别为15.88和21.82kJ/mol.这些结果与当异硫氰酸酯与亚胺发生环加成反应时,只有类似于P2和P3的两种六元环产物生成的实验事实一致。     

Theoretical study of C24N4 molecule

Both ab initio 6-31G, 3-21G and STO-3G basis sets and semiempirical PM3 and AM1 molecular orbital calculations are carried out on the C₂₄N₄ molecule of the T_d symmetry group. Results on the fully optimized structure which constrained T_d symmetry, molecular orbitals and vibrational frequency were obtained by both ab initio and semiempirical methods. The binding energy and various thermodynamic properties were also calculated via the PM3 and AM1 semiempirical methods. All the evidence of this work proves that the C₂₄N₄ molecule is stable and that its four six-membered rings with a remarkable delocalized C…C bond are similar to the related rings in the C₆₀ buckminsterfullerene structure.     

Various atomic charge calculation schemes of CoMFA on HIF‐1 inhibitors of moracin analogs

Selection of appropriate partial charges in a molecule is crucial to derive good quantitative structure–activity relationship models. In this work, several partial atomic charges were assigned and tested in a comparative molecular field analysis (CoMFA) models. Many CoMFA models were generated for a series of hypoxia inducible factor 1 (HIF‐1) inhibitors using various partial atomic charges including charge equalization, Mülliken population analysis (MPA), natural population analysis, and electrostatic potential (ESP)‐derived charges. These atomic charges were investigated at various theoretical levels such as empirical, semiempirical, Hartree–Fock (HF), and density functional theory (DFT). Among them, Merz‐Singh‐Kollman (MK) ESP‐derived charges at the level of HF/6‐31G* gave the highest predictive q² with experimental pIC₅₀ values. With this charge scheme, a detailed analysis of CoMFA model was performed to understand the electrostatic interactions between ligand and receptor. More elaborate charge calculation schemes such as HF and DFT correlated more strongly with activity than empirical or semiempirical schemes. The choice of optimization methods was important. As geometries were fully optimized at the given levels of theory, the aligned structures were different. They differed considerably, especially for the flexible parts. This was likely the source of the substantial variation of q² values, even when the same steric factor was considered without electrostatic parameters. ESP‐derived charges were most appropriate to describe CoMFA electrostatic interactions among MPA, NBA, and ESP charges. Overall q² values vary considerably (0.8–0.5) depending on the charge schemes applied. The results demonstrate the need to consider more appropriate atomic charges rather than default CoMFA charges. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Potential energy surface of thionylimide

The potential energy surface (PES) of thionylimide has been searched using ab initio MO and density functional calculations. The electronic structures of the isomers of HNSO have been studied using the HF/6‐31+G*, MP2(full)/6‐31+G*, and B3LYP/6‐31+G* levels. Final energies of these molecules have been calculated at the high‐accuracy G2 and CBS‐Q levels. The probable pathways of isomerization of thionylimide to its isomers (e.g., thiocyanic acid, HONS, nitrosothiols) have been explored by studying the three‐ or four‐membered transition states. This study identified total eight possible isomers ( 1–8 ) of HNSO, of which four ( 1–4 ) have already been realized experimentally. Of the remaining four ( 5–8 ), at least two ( 5, 7 ) can be generated experimentally. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Electronic absorption and emission spectra and computational studies of some 2-aryl, 2-styryl, and 2-(4′-aryl)butadienyl quinazolin-4-ones

The relatively less popular group of quinazoline heterocyclic compounds is searched theoretically for compounds with promising classical and nonlinear optical properties, e.g. fluorescence and high (hyper)polarizabilities. Candidates for NLO materials are found among the general series of -4-(3H)-quinazolonyl-ω-aryl polyenes 1, 2, 3 and their fluorescence spectra are registered experimentally. CIS/6-31G* calculations provide no reliable predictions of observed UV/Vis and fluorescence spectra. However, semiempirical CISD PM3 calculations predict fairly well the observed bathochromic effects arising from extension of polyene chains (CHCH)_n, n=0–2, and donor substitution in the aryl fragments. The observed fluorescence is assigned to planar quinonoid S1 emissive states, while ground S0 state geometries of compounds with n=0 are nonplanar, and with n>0 are planar. We find high TDHF PM3 static polarizabilities for all studied molecules, as well as high hyperpolarizabilities β SHG and γ THG.