Tuning of graphitic carbon nitride (g-C3N4) for photocatalysis: A critical review

Graphitic carbon nitride (g-C₃N₄) is a remarkable semiconductor catalyst that has attracted widespread attention as a visible light photo-responsive, metal-free, low-cost photocatalytic material. Pristine g-C₃N₄ suffers fast recombination of photogenerated electron-hole pairs, low surface area, and insufficient visible light absorption, resulting in low photocatalytic efficiency. This review presents the recent progress, perspectives, and persistent challenges in the development of g-C₃N₄-based photocatalytic materials. Several approaches employed to improve the visible light absorption of the materials including metal and non-metal doping, co-doping, and heterojunction engineering have been extensively discussed. These approaches, in general, were found to decrease the material’s bandgap, increase the surface area, reduce charge carrier recombination, and promote visible light absorption, thereby enhancing the overall photocatalytic performance. The material has been widely used for different applications such as photocatalytic hydrogen production, water splitting, CO₂ conversion, and water purification. The work has also identified various limitations and weaknesses associated with the material that hinders its maximum utilization under visible illumination and presented state-of-the-art solutions that have been reported recently. The summary presented in this review would add an invaluable contribution to photocatalysis research and facilitate the development of efficient visible light-responsive semiconducting materials.     

Transition metal dichalcogenide thin films for solar hydrogen production

In the last three decades, transition metal dichalcogenides (TMDs) have been extensively studied for electronic, photonic, and energy applications. Different efforts are directed to find a holy grail of efficient and economically feasible materials that could be simple in production and available on a large scale. The interest in TMDs (MoS₂, WS₂, MoSe₂, WSe₂) stems from their suitable electronic structure for efficient solar light absorption and simple exfoliation technique of 2D crystallites due to the van der Waals bonding of these materials. This led to various designs and combinations of 2D single layers that could form heterojunctions and multijunctions for efficient light absorption, charge carrier generation/separation, and its transfer in optoelectronic and energy harvesting devices. Herein, TMD thin films are reviewed as photoelectrodes for solar hydrogen evolution and compared to that of other more developed materials.     

Hydrides compounds for electrochemical applications

Hydrides have been used since a long time for solid-state hydrogen storage and electrochemical nickel-metal hydride batteries. Besides these applications, growing attention has been devoted to their development as anode materials, as well as solid electrolytes for Li-ion and other ion batteries. Herein, we review and summarize the recent advances of hydrides as negative electrodes for Ni-MH and A-ion batteries (A = Li, Na), and as electrolyte for all solid-state batteries (ASSB). Metallic hydrides such as intergrowth compounds are highlighted as the best compromise up to now for Ni-MH. Regarding anodes of Li-ion batteries, MgH₂, especially its combination with TiH₂, provides very promising results. Complex hydrides such as Li-borohydride and related closo-borates and monovalent carborate boron clusters appear to be very attractive as solid electrolytes for Li-based ASSB, whereas closo-hydroborate sodium salts and closo-carboborates are investigated for Na- and Mg-ASSB. Finally, further research directions are foreseen for hydrides in electrochemical applications.     

Conjugate polymer-based membranes for gas separation applications: current status and future prospects

Conjugate polymers provide the possibility of exploiting both the chemical and physical attributes of the polymers for membrane-based gas separation. The presence of delocalized π electrons provides high chain stiffness with low packing density, thus making the membrane a rigid structure that favors facilitated transport. Historically, the polymeric membranes were constrained by the tradeoff relationship between gas permeability and gas selectivity. So, different methods were investigated to prepare the membranes that can overcome the limitation. In recent years, electroconductive polymeric membranes have gained attention with their enhanced transportation properties combining the separation behavior depending on both molecular size discrimination as well as the facilitated transport. They offer better selectivity toward polar gases such as CO₂ because of the increased solubility. This review is aimed to provide a literature survey on gas separation using conjugate polymers such as polyaniline, polypyrrole, and some derivatives of polythiophenes. It contains various methods used by different researchers to enhance the gas separation properties of the membranes with improved mechanical and thermal stability such as changing the morphology and membrane preparation methods. In addition, it provides the pros and cons of various factors affecting the conjugate polymer membrane performance. The major challenges and future work that can be done in improving the transportation properties through the membrane to achieve viable membranes are also discussed so that they can be used for commercial and practical applications in the future.     

Recent progress in TiO2-based photocatalysts for hydrogen evolution reaction: A review

TiO₂ has gained tremendous attention as a cutting-edge material for application in photocatalysis. The performance of TiO₂ as a photocatalyst depends on various parameters including morphology, surface area, and crystallinity. Although TiO₂ has shown good catalytic activity in various catalysis systems, the performance of TiO₂ as a photocatalyst is generally limited due to its low conductivity and a wide optical bandgap. Numerous different studies have been devoted to overcome these problems, showing significant improvement in photocatalytic performance. In this study, we summarize the recent progress in the utilization of TiO₂ for the photocatalytic hydrogen evolution reaction (HER). Strategies for modulating the properties toward the high photocatalytic activity of TiO₂ for HER including structural engineering, compositional engineering, and doping are highlighted and discussed. The advantages and limitations of each modification approach are reviewed. Finally, the remaining obstacles and perspective for the development of TiO₂ as photocatalysts toward high efficient HER in the near future are also provided.     

Plant cell culture technologies: A promising alternatives to produce high-value secondary metabolites

Plants have been used for its medicinal values since ancient time. The medicinal properties of plants are based on their phytochemical constituent particularly secondary metabolites which are produced in low amounts by plants. Secondary metabolites have been used as medicines, flavors, colors, and fragrances. In recent time, these natural compounds are gaining enormous attention in pharmaceutical, cosmetics, and nutraceutical industries and are regarded economically valuable products. The production of plant secondary metabolites in plant is largely dependent on the plant species, environmental factors and geographical regions. In addition, the main challenges in their mass production is reported to be the quality and quantity issues during their synthesis. Therefore, enthusiasm has grown for increasing the production of secondary metabolites by employing in vitro plant cell culture technology and bioengineering methods. Such technological advancement, has led to production of a huge number of medicinal herbs and high-value secondary metabolites that are mostly used in pharmaceuticals, cosmetics and nutraceuticals industries. The current mini-review article focuses on applications of plant cell culture system for the production secondary metabolites and recent techniques used to improve metabolite contents. Furthermore, our review emphasizes safety issues of plant cell culture derived products.     

Photocatalytic remediation of persistent organic pollutants (POPs): A review

The release of persistent organic pollutants (POPs) into the environment is an issue of global concern, as the chemicals are stable over a prolonged period resulting in their accumulation in many animals and plants. Although POPs are banned in several countries, many chemicals have been proposed as POP candidates to be added to the existing compounds as defined by the United Nations Stockholm Convention committee. To address the safe disposal and clean-up of such chemicals, new, and especially cost-effective, remediation technologies for POPs are urgently required. This review focuses on existing POPs and the types of remediation processes available for their removal. Particular attention is paid towards photocatalysis using nanocatalysts in this review, due to their effectiveness towards POP degradation, technological feasibility, and energy and cost-efficiency. The underlying principles and the key mechanisms of the photocatalysts based on TiO₂ based materials, metal oxides, light-assisted Fenton systems, framework materials e.g. metal-organic frameworks and polyoxometalates, including metal-free and hybrid photocatalysts for POPs cleanup are described for advance applications in solving the POPs contamination in the environment. The improvements of photocatalytic performance especially the POPs removal mechanism using the conventional and modified process, the design and optimization of photoreactors, and the integration technology are the critical challenges for the emerging pollutants and require intensive research for the forthcoming future.     

The glucocorticoid derivative with the phthalimide group cationic nanocrystal for ophthalmic application: a design space development approach

The glucocorticoid derivative of budesonide with a phthalimide group is a drug candidate to treat inflammatory eye diseases; nevertheless, it presents low water solubility. Drug nanocrystals have been proposed to overcome this hurdle. The development of an innovative ophthalmic anti-inflammatory nanosuspension was performed using a design space approach. We obtained the particle size reduction of this glucocorticoid derivative on a nanometer scale (approximately 165.0 nm), applying wet bead milling on a super reduced scale. The design of experiment supported the optimization of the formula evaluating the parameters that influence reducing the particle size and also allowed determining the design space. Considering the two statistical models developed and the size range obtained, we proposed that the optimized formulation for the glucocorticoid derivative nanosuspension may be 1.0 wt% glucocorticoid derivative and 0.092 wt% cetylpyridinium chloride. This formulation was characterized by the morphological, physical–chemical, and mucoadhesive in vitro test and showed potential for ophthalmic use with reduced frequency of product application, improved efficiency, and safety, which may promote better patient compliance.     

Probing electrochemical surface/interfacial reactions with liquid cell transmission electron microscopy: a challenge or an opportunity?

Understanding electrochemical reactions at material surfaces and interfaces is crucial for the development of next-generation battery electrodes and electrocatalysts — two key areas in global CO₂ mitigation strategies. By allowing these dynamic reactions to be captured on an atomic level and in real-time, the liquid cell transmission electron microscopy (LC-TEM) technique has carved itself a niche in energy materials research. Several key problems are being investigated, ranging from addressing dendrite growth in lithium-ion batteries that cause a thermal runaway, to understanding mass loss of expensive platinum catalysts in native hydrogen fuel-cell environments. Unfortunately, as with any emerging technology, LC-TEM is not without its share of problems. Undesired electron beam interactions with the liquid, low containable liquid volumes, and poor spatial resolution due to plural scattering are only some of the many problems which must still be fully resolved.This short review highlights the strengths and weaknesses behind LC-TEM while providing updates on the latest applications and technical advances in the areas of dose-minimization strategies, improvements in analytical abilities, and novel closed-cell design. Notable future opportunities include off-axis holography, diffraction tomography, and pump-probe laser excitations — all carried out in liquids.     

Stimuli-responsive microemulsions: State-of-the-art and future prospects

Over the last decade, stimuli-responsive microemulsions, that is, those that switch between stable and unstable states in response to certain stimuli, have attracted considerable attention because of their unique properties and potential for diverse applications. Herein, we highlight the recent advances in the development of microemulsions responsive to external triggers such as pH, redox reactions, light, CO₂ gas, magnetic field and temperature; discuss the corresponding responses; and reveal important composition–microstructure–macroscopic property relationships to suggest future research directions and potential applications.     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

Bibliometric analysis and an overview of the application of the non-precious materials for pyrolysis reaction of plastic waste

Huge plastic consumption and depletion of fossil fuels are at the top of the world's environmental and energy challenges. The scientific community has tackled these issues through different approaches. Catalytic pyrolysis of plastic wastes to valuable products has been proved as a sustainable route which fits with the circular economy aspects. The design of catalytic materials is the central factor for performing the catalytic conversion of plastic wastes. This review aims to conduct a Bibliometric analysis of the pyrolysis of plastic wastes and non-precious-based catalysts by mapping research studies over the last fifty years. The analysis was developed via VOSviewer and RStudio tools. It showed the historical progress regarding plastic waste pyrolysis to produce valuable products and chemicals worldwide. The research shows that the top five countries with the highest citations and publications in this field were Spain, China, England, the USA and India. The Journal of Analytical and Applied Pyrolysis had the most comprehensive coverage of plastic waste. The relationship between the catalyst and the mechanism of plastic waste can influence the production yield and selectivity. The research gap and underrepresented research topics were identified, and previous research studies on developing non-precious-based catalysts that were most relevant to the current topic were reviewed and discussed. The challenges and perspectives on catalyst preparation and development for material complexity were critically discussed. Challenges of previous studies and directions for future research were provided. This report might guide the reader to take a general look at plastic waste valorization by pyrolysis and easily understand the main challenges.     

Cyclometalated complexes containing ferrocenyl Schiff base: Preparation,characterization, DFT calculations,application in cancer and biological researches and MOE studies

A series of transition metal (II/III) complexes containing organometallic Schiff base ligand (H₂L) had been synthesized and characterized by using elemental analysis (C, H, N, M), molar conductivity, IR, UV–Vis, ¹H NMR and mass spectral analysis. Also, their TG and DTG behaviors were investigated. The ligand was prepared by condensation of 4-aminosalicylic acid with 2-acetylferrocene in 1:1 M ratio. The data of elemental analysis indicated that the prepared complexes were synthesized also in a 1:1 M ratio. The ligand behaved as neutral bidentate ligand that coordinated to metal ions through protonated O-phenolic and protonated carboxylic-OH groups. All complexes had octahedral structure. DFT calculations for H₂L ligand were determined with some parameters such as HOMO-LUMO energy gab, electronegativity and chemical hardness–softness. Antimicrobial activity of both H₂L Schiff base ligand and its metal complexes was tested against different strains of bacteria and fungi species. Furthermore, all compounds had been screened for their anticancer activities against breast cancer (MCF-7) cell line. [Cu(H₂L)(H₂O)₂Cl₂]·2H₂O complex had the lowest IC₅₀ value = 47.3 µg/mL. For determining the more effective and probable binding mode between the H₂L ligand, Co(II) and Zn(II) complexes with different active sites of 4K3V, 2YLB and 3DJD receptors, so molecular docking studies were investigated.     

Natural convection of hybrid nanofluid heat transport and entropy generation in cavity by using Lattice Boltzmann Method

A mesoscopic study of natural convection due to MWCNT-Fe₃O₄/Water hybrid nanofluid is conducted utilizing the Lattice Boltzmann Method. The test fluid is filled in a differentially heated rectangular enclosure. Effects of aspect ratio in the range of 0.5–2.0, Rayleigh number varying from 10³ to 10⁵ and nanocomposite volume fraction on heat and fluid flow characteristics and entropy generation have been illustrated. It is observed that the mean Nusselt number rises with the increase in Rayleigh number, while it falls as the aspect ratio increases. However, the mean Nusselt number enhances with the increase in MWCNT-Fe₃O₄ volume fraction up to 0.001. On further increasing the volume fraction, the mean Nusselt number shows either no significant rise or deterioration for the case of MWCNT-Fe₃O₄ nanocomposite. The dimensionless entropy generation number rises with the increase in the Rayleigh number. However, it falls with an increase in aspect ratio and dimensionless temperature difference. Interestingly in the case of increasing nanoparticle loading fraction, entropy generation number augments first, attains a maximum at 0.001 ?vol fraction of nanocomposite, and then it decreases. Nevertheless, at the low Rayleigh number, it keeps on rising with an increase in nanocomposite volume fraction. The best thermal performance is obtained for the cavity of 0.5 aspect ratio. A correlation for the mean Nusselt number is proposed.     

Influence of extractions on physicochemical characterization and bioactivity of Piper nigrum oils: Study on the non-isothermal decomposition kinetic

Black pepper oils have been investigated frequently in the recent years. However, there is a significant variation in physicochemical properties and bioactivity of oils depended on extraction techniques. In this study, the systemic investigation of four various extraction methods was performed to evaluate the physicochemical characterizations, antioxidant and antibacterial activity. The investigation of ¹H NMR, FTIR and UV–Vis spectra confirmed presence of non-volatile components in oils extracted through supercritical CO₂ and hexane-soaking extractions which induced their typical thermal properties. The isothermal behaviour of extracted oils related to evaporation was within range of 3.2–7.3% (w/w) at 27 °C. The SEM images of the black pepper confirmed different operation manners of mechanism between extractions using the solvents and heating process. The lowest MIC for both essential oils from conventional hidrodistillation and microwave-assisted hidrodistillation against two bacteria including E. coli and B. subtilis were found to be 137 µg mL⁻¹. The non-isothermal decomposition kinetics were investigated on the essential oil of microwave-assisted hydrodistillation extraction. The activation energies and pre-exponent factors of non-isothermal decomposition were found to be in range of 36.5–73.7 KJ mol⁻¹ and 4.98 × 10³–1.97 × 10⁸ s⁻¹, respectively, dependent on conversional fractions of the oil. The results revealed that chemical components, physicochemical properties and bioactivity of black pepper essential oils depended on the extraction techniques.     

Microwave-assisted extraction of high-molecular-weight hemicelluloses from spruce wood

Microwave-assisted extraction (MAE) at atmospheric pressure has been demonstrated as an efficient technology for the extraction of polymeric hemicelluloses from spruce sawdust. This technology was shown to be more efficient than conventional extraction. MAE leads to a high solubilization of wood and a selective extraction of hemicellulose polymers with high molecular weights. To optimize MAE, different treatment powers (125–573 W) of presoaked spruce sawdust in water and 1 M sodium hydroxide solution for a period of 60 min were tested. The yield of hemicellulose extraction increased with the microwave power in both mediums, but with a clear advantage for presoaked samples in basic medium. The characterization of extracted hemicelluloses has shown high extraction selectivity depending on the medium of impregnation of sawdust before MAE: High-molecular-mass acetylated galactoglucomannans (M_w ∼ 41 kDa) were isolated after presoaking in water and higher molecular mass arabinoglucoronoxylans (M_w ∼ 66 kDa) in basic medium.     

Bioelectrodes for evaluating molecular therapeutic and toxicity properties

Recent progress on material designs merged with nanotechnology and biotechnology strategies has advanced studies of complex biological samples on electrodes for cytochrome P450 (CYP)–driven biocatalytic reactions (e.g. liver membrane fractions, cells, and various organ-specific CYP extracts). In addition, protein engineering of CYP enzymes with their reductase partner in membranes (e.g. baculovirus- or Escherichia coli bacteria–expressed CYP microsomes) and other recombinant strategies (e.g. engineered CYP and reductase fusion domains and site-directed CYP mutagenesis) are promising sustainable approaches for offering abundant sources of CYP enzymes for electrocatalytic applications. The combination of in silico and experimental electroanalytical methods with hyphenated approaches and biological assays can offer early and rigorous profiling of new drugs and specialty chemicals for safe exposure and beneficial use.     

Synthesis,bioactivity and preliminary mechanism of action of novel trifluoromethyl pyrimidine derivatives

In this study, a series of trifluoromethyl pyrimidine derivatives 5a-5v were designed and synthesized. All synthetic compounds were original. Bioassay results showed that some of the target compounds were proved to have higher antiviral and antifungal activities than those of commercial agents. Especially, EC₅₀ values of the curative activity of compound 5j and the protection activity of compound 5m were 126.4 and 103.4 µg/mL, respectively, which were lower than that of ningnanmycin. Microscale thermophoresis experiment proved that there was a good interaction between compound 5m and TMV-CP. Meanwhile, the antifungal activity results showed that compound 5u had a significant on in vitro against Rhizoctonia solani (RS) activity, with the EC₅₀ value of 26.0 µg/mL, which was equal to that of azoxystrobin. As well, in vivo experiments on rice leaves showed that compound 5u could effectively control RS, and the effect of 5u on the cell morphology of RS was observed by scanning electron microscopy.     

Synthesis,pharmacological evaluation,and molecular modeling studies of novel isatin hybrids as potential anticancer agents

A novel series of isatin hybrids 5a-g was designed, synthesized, and characterized spectroscopically. The synthesized compounds were evaluated for their cytotoxic activity against the human breast cancer cell line (MCF-7) by in vitro MTT assay. Amongst the tested compounds, 5e compound bearing benzyl moiety at N₄ piperazine was found to be the most active with the promising IC₅₀ (12.47 µM). Moreover, the active compounds 5e and 5g were subjected to antitumor evaluation (in vivo) against Dalton’s ascitic lymphoma (DAL) cell line and the results suggested that the best active compound 5e can normalize the blood picture in comparison to the standard drug. An in silico molecular docking study using the crystal structure of Hsp90 protein described the role of significant protein–ligand interactions and revealed more insights into the binding mode. The drug-likeliness of the compounds was predicted based on Lipinski's rule of five and pharmacokinetic ADME parameters. Hence, the synthesized isatin hybrids could be novel starting point anticancer lead compounds demonstrating drug-like properties which can be explored further for anticancer drug discovery.