PIV技术在气体界面不稳定性实验研究中的应用

采用粒子图像测速(Particle Image Velocimetry,PIV)技术,以乙二醇烟雾作为示踪粒子,实验测量了平面激波作用下SF6气柱-空气界面Richtmyer-Meshkov不稳定性演化图像和二维速度场.测量结果揭示了不稳定性流场的典型特征和细微结构,与高速摄影和数值模拟结果符合,说明建立的PIV技术适...     

苯酚苯胺共聚物在304不锈钢电极表面的电化学合成及成膜微观结构分析

苯酚和苯胺在304不锈钢阳极表面实现了电化学共聚,反应在中性水溶液中进行,电解质为硫酸钠. 比较不同苯酚苯胺浓度下共聚成膜耐点蚀能力,当苯酚为0.09 mol/L和苯胺为0.01 mol/L时最佳.红外光谱分析证实苯胺结构出现在苯酚苯胺的共聚物中,且共聚物膜比聚苯酚膜含有更多支链. 利用苯酚苯胺共聚物膜在四氢呋喃中的部分溶解性,使用扫描电子显微镜分析四氢呋喃清洗前后的成膜,观察到网状聚苯胺结构. 将共聚物膜与聚苯酚膜微观结构进行推测和比较,解释在电聚合反应中适量加入苯胺能提升成膜防腐能力原因.     

硫氰酸盐光度法测定低合金钢中钼的测量不确定度评定

用硫氰酸盐分光光度法测定低合金钢中钼的含量,对测定过程中的不确定分量进行了分析和评定.测量不确定度主要来源于试料称量、标准溶液、校准曲线拟合、玻璃仪器的使用及测量重复性.当钼的含量为0.181%时,其扩展不确定度为0.0064%(k=2).     

Corrosion inhibition and mechanism of mild steel in hydrochloric acid by ceftriaxone and amoxicillin

Corrosion inhibition of mild steel in 1 mol/L HCl by amoxicillin and ceftriaxone in the concentration range of 1.00×10-5-1.00×10-2 mol/L has been studied using weight loss,electrochemical potentiodynamic polarization,electrochemical impedance spectroscopy(EIS),scanning electron microscopy(SEM) and quantum chemistry tests at 298 K.The weight loss experiment showed that the inhibition efficiency increased with amoxicillin and ceftriaxone concentrations to attain the maximums of 80.3% and 94.1%,respectively at...     

UV irradiation enhances the bonding strength between citric acid-crosslinked gelatin and stainless steel

The effect of ultraviolet ray (UV) irradiation on the bonding strength between low carbon stainless steel 316 (SUS316L) and trisuccinimidyl citrate (TSC)-crosslinked alkali-treated gelatin (AlGelatin-TSC) was investigated. The UV irradiation effectively generated hydroxyl groups on the surface of SUS316L. The bonding strength between AlGelatin-TSC and SUS316L before UV irradiation was 0.345±0.007 MPa, and upon UV irradiation it increased to 0.750±0.069 MPa. In order to explain this enhanced bonding strength, the surface of SUS316L was examined using its water contact angle and X-ray photoelectron spectroscopy. Furthermore, the N 1s peaks derived from the TSC succinimidyl group were assigned to the surface of SUS316L after the immobilization of the TSC. This indicates that ester bond formation between the TSC active esters and the SUS316L hydroxyl groups contributed to the enhanced bonding strength. Therefore, UV irradiation and subsequent TSC immobilization is a simple way to functionalize biometal surfaces with various structures. This has practical applications for medical devices such as drug-eluting stents, dental implants, and metallic artificial bone.     

Optimized grafting of antimicrobial peptides on stainless steel surface and biofilm resistance tests

Antibacterial peptides, magainin I and nisin were covalently bound to stainless steel surfaces. Several procedures of surface functionalisation processes have been investigated and optimized, each step being characterized by polarization modulation reflection absorption infrared spectroscopy (PM-RAIRS) and X-ray photoemission spectroscopy (XPS). Grafting of antibacterial peptides was successfully achieved by a 3 steps functionalisation process on a chitosan polymeric layer. The antibacterial activity of the anchored magainin and nisin was tested against a gram-positive bacteria, Listeria ivanovii, i.e., the possible survival and attachment of this bacteria, was characterized on modified stainless steel surfaces. The results revealed that the adsorbed peptides reduced the adhesion of bacteria on the functionalised stainless steel surface.     

基于SEM与FTIR研究改性钢渣/橡胶复合材料的热氧老化机理

钢渣是冶金工业中产生的主要固体废弃物,其产量约为每年粗钢产量的15%~20%。由于技术的局限,导致我国钢渣利用率较低,仅为年钢渣产量的10%,同时加之管理制度的不健全,导致钢渣大量露天堆放,对土地资源、地下水源,以及空气质量形成严重影响。面对上述问题,以热闷渣、电炉渣和风淬渣研发改性钢渣微粉,并且将改性钢渣微粉与复合橡胶进行复合制备改性钢渣/橡胶复合材料。依据《硫化橡胶或热塑性橡胶热空气加速老化和耐热试验》（GB/T3512—2014）对改性钢渣/橡胶复合材料进行热氧老化处理,采用平衡溶胀法测定改性钢渣/橡胶复合材料的交联密度,扫描电子显微镜（SEM）、热重分析仪（TGA）和傅里叶转换红外光谱仪（FTIR）分别测试其微观形貌、失重率和结构组成,从微观层面阐述改性钢渣/橡胶复合材料的热氧老化机理。结果表明在热氧老化前期老化作用在改性钢渣/橡胶复合材料表面,其内部以交联键形成反应为主;在热氧老化中期老化作用已经作用改性钢渣/橡胶复合材料内部,造成交联键断裂反应速度高于交联键形成反应速度,形成大量断裂交联键;在热氧老化后期由于改性钢渣/橡胶复合材料内部已经存在大量断裂交联键,导致主链及交联键断裂速度降低,交联键形成反应占优势。改性钢渣微粉以热闷渣（SiO₂含量高）为原材料,有利于形成聚合物大分子链贯穿炭黑网络的结构,提高综合性能,尤其是物理机械性与滞后性;以电炉渣、风淬渣（Fe₂O₃含量高）制备改性钢渣微粉,有利于热传导性能的改善,不仅提高改性钢渣/橡胶复合材料的耐热性,而且提高其硬度与脆性。热氧老化过程中改性钢渣/橡胶复合材料内部在橡胶分子链α-H上发生了不同程度的氧化反应,并在橡胶分子链周围生成了羟基、羧基和醇类化合物,双键烯氢含量降低。     

高雷诺数下的圆柱绕流问题——以蜡烛燃烧为例

本文针对高雷诺数下的圆柱绕流问题,以火焰熄灭为例进行了相关的实验研究.结果表明在一定范围内,火焰熄灭时间与障碍物直径、蜡烛与障碍物之间的距离、蜡烛燃烧速率成正比关系,与气流流速成反比关系.通过分析发现实验数据与理论分析一致,说明了文章的实验方法可行、结论正确,为深入研究圆柱绕流、火焰燃烧问题及二者之间的联系提供了重要支撑.     

Small-angle neutron scattering study on the stability of oxide nanoparticles in long-term thermally aged 9Cr-oxide dispersion strengthened steel

A 9Cr-oxide dispersion strengthened (ODS) steel was thermally aged at 873 K for up to 5000 h. The size distribution and chemical composition of the dispersed oxide nanoparticles were analyzed by small-angle neutron scattering under a magnetic field. Combined with transmission electron microscopy, Vickers micro-hardness tests and electron backscattered diffraction measurements, all the results showed that the thermal treatment had little or no effect on the size distributions and volume fractions of the oxide nanoparticles in the ferromagnetic matrix, which suggested excellent thermal stability of the 9Cr-ODS steel.     

ICP-AES内标法测定钢铁及其合金样品中的化学成分

建立了内标法测定钢铁样品中化学成分的ICP-OES分析方法。利用铟元素作为内标物质,消除了铁基体元素对被测元素的干扰,减少了废气、废液的产生。钢铁样品中16种被测元素的检测范围在0．001％-20．00％之间,检出限为0．001-0．030μg／mL,回收率为97％-110％。该方法减少了高纯物质的使用。