光纤陀螺寻北仪在测量当地纬度时的一些探讨

光纤陀螺可以测量自身轴向角速度的大小,利用它的这种敏感性便可实现寻北和实验室所在纬度的测量.本文在简要介绍光纤陀螺寻北仪实验的基础上,着重对纬度的两种不同定义方法及其计算结果进行了分析,同时讨论了目前国际上通用的纬度计算方法与我国通用方法之间的关系,给出了它们之间的转换方法.     

利用光纤法布里-珀罗谐振器干涉透射波长同时测量混合溶液中多溶质浓度(英文)

为了同时探测混合溶液中多种溶质的浓度,提出一种用光纤法布里-珀罗谐振器作为传感器测量混合溶液中多溶质浓度的测量系统.从理论上分析了光纤法布里-珀罗谐振器干涉透射波长与混合溶液浓度之间的关系,采用光纤法布里-珀罗谐振器干涉透射波长实现了高准确度同时测量混合溶液中多溶质浓度的原理和可行性.构建了由InGaAs发光二极管光源、光纤耦合器、FFPR传感器、光电信号转换和放大器、光谱分析仪等组成的测量系统.对乙醇和甘油的9组标准混合溶液进行测量实验,并用测量结果标定了混合溶液中各溶质浓度与光纤法布里-珀罗谐振器传感器干涉透射波长之间的数学解析关系式.根据数学关系式用Action Script 2.0脚本语言编写程序,计算机实时监控了混合溶液中各溶质浓度的变化过程.     

目标表面发射率对红外热像仪测温精度的影响

介绍了红外热像仪测温原理,分析了影响红外热像仪测温精度的因素,计算了不同表面发射率下红外热像仪的测温误差曲线。理论分析表明,目标表面发射率越高,红外热像仪测温精度越高。实验改变表面发射率的设置,计算了不同表面发射率对应的总辐射亮度,得到TP8型长波红外热像仪能够精确测温时,目标表面发射率必须大于0.5的结果。最后,对表面发射率分别为0.96、0.93和0.3的3种材料进行实际测温,结果表明,材料表面发射率较高时,红外热像仪具有较好的测温精度。     

激光驾束观瞄制导仪参数检测系统

为使激光驾束观瞄制导仪各项性能参数能够在室内完成全面检测,提出了一种参数检测系统的设计方案。对参数检测系统的各组成部分分别进行了论述。该系统可检测固定焦距的激光通道与瞄准通道两轴线平行度、典型位置的输出特性、全程变焦过程中激光轴相对于瞄准轴的最大失调量,并可运用CCD图像处理技术检测激光信息场辐照度的均匀性等,具有结构简单,操作方便、检测精度高等优点。模拟试验表明,该设计方案能够满足工程中实际检测的要求。     

Circulation times of hepatocellular carcinoma cells by in vivo flow cytometry

Hepatocellular carcinoma （HCC） may metastasize to many organs. The survival rate is almost zero for metastatic HCC patients. Molecular mechanisms of HCC metastasis need to be understood better and new therapies must be developed. We have developed the ＂in vivo microscopy＂ to study the mechanisms that govern liver tumor cells spreading through the microenvironment in vivo. A recently developed ＂in vivo flow cytometer＂ combined with real-time confocal fluorescence imaging is used to assess spreading and the circulation kinetics of liver tumor cells. We measure the depletion kinetics of two related human HCC cell lines, high-metastatic HCCLM3 cells and low-metastatic HepG2 cells, which are from the same origin and obtained by repetitive screenings in mice. More than 60% of the HCCLM3 cells are depleted within the first hour. Interestingly, the low-metastatic HepG2 cells possess noticeably slower depletion kinetics. In comparison, less than 40% of the HepG2 cells are depleted within the first hour. The differences in depletion kinetics might provide insights into early metastasis processes.     

Rotating polarizer,compensator, and analyzer ellipsometry

In this paper we propose theoretically a set of ellipsometric configurations using a rotating polarizer, compensator, and analyzer at a speed ratio of N1ω：N2ω：N3ω. Different ellipsometric configurations can be obtained by giving different integral values to N1, N2, and N3. All configurations are applied to bulk c-Si and GaAs to calculate the real and imaginary parts of the refractive index of the samples. The accuracies of all ellipsometric configurations are investigated in the presence of a hypothetical noise and with small misalignments of the optical elements. Moreover, the uncertainties in the ellipsometric parameters as functions of the uncertainties of the Fourier coefficients are studied. The comparison among different configurations reveals that the rotating compensator–analyzer configuration corresponds to the minimum error in the calculated optical parameters.     

Research of the planar optical fiber Bragg grating hydrophone probe

This paper presents the planar Fiber Bragg Grating （FBG） hydrophone probe sensing principle, and theoretically and experimentally researches the probe structure sensitivity, the receiving sensitivity frequency response characteristic and the acceleration response property. Planar sheet is made of stainless steel, its thickness is 0.15 mm, its diameter is 15mm, and the length of hollow circular shell is 20 mm. For this size of the structure, the probe structure sensitivity is up to 23 fm/Pa, which is about 7300 times of the value of the bare fiber. The resonance frequency is 6.5 kHz, and the amplitude-frequency curve of the receiving sensitivity response is relatively flat within the frequency range of 100 Hz to 5.5 kHz. The output yielded by one unit acceleration （1m/s2） is equivalent to （2.52 to 3.26 Pa） acoustic pressure acting output. This probe structure is easy to form FBG hydrophone array by multiplexing technique. The research shows that this planar structure not only can form FBG hydrophone probe, but also can constitute optical FBG laser hydrophone probe. The structure can realize different bandwidth, different range acoustic pressure measurement by adjusting the geometrical size of the sheet.     

提高布里渊光时域反射应变仪测量空间分辨力的等效脉冲光拟合法

由于探测光脉冲宽度受到限制,布里渊光时域反射仪(BOTDR)在对光纤上的应变进行分布式测量时,空间分辨力只能达到1 m。针对布里渊光时域反射仪单次采样接收背向布里渊散射信号(BBS)需要一定的时间,提出了基于等效脉冲光的多洛仑兹拟合法以提高其应变测量的空间分辨力。该方法将探测光脉冲在布里渊光时域反射仪完成单次采样所需的时间上进行积分,将积分函数作为等效脉冲光的表达式,再根据等效脉冲光的形状将布里渊光时域反射仪接收到的背向布里渊散射谱(BBS)细分,并对它进行多洛仑兹迭代拟合,准确求得每个细分布里渊散射谱的中心频率,进而利用光纤中布里渊频移与应变的对应关系,得到光纤中与细分布里渊散射谱对应的细分光纤单元上的应变情况。实验结果表明,利用这种方法,可使布里渊光时域反射仪应变测量的空间分辨力提高至0.05 m。     

溶胶-凝胶SiO2薄膜氨热两步后处理

 以正硅酸乙酯为前驱体,氨水作催化剂,采用溶胶-凝胶法提拉镀制SiO₂双面膜,对薄膜进行氨处理和热处理。采用椭偏仪、分光光度计、红外光谱、扫描探针显微镜、静滴接触角测量仪表征薄膜的特性。研究表明：经氨热两步后处理,膜厚持续减小,折射率经氨处理先增大了0.236,再经热处理又减小了0.202,膜层透光性变好,透过率峰值持续向短波方向移动;经两步后处理的膜面平整度明显变好,与水的接触角先增大到58.92°后减小到38.07°。