PEMFC阴极催化层结构分析

采用CCS法（catalyst coated substrate）构建铂纳米颗粒（Pt-NPs）和铂纳米线（Pt-NWs）双层催化层结构,分析其对单电池电化学性能的影响。对于富铂/贫铂双层铂纳米颗粒结构,靠近质子交换膜侧的富铂层中致密的铂颗粒结构能促进ORR速率,而靠近气体扩散层一侧的具有更高的孔隙率和平均孔尺寸的贫铂层,有利于反应气体的传输和扩散,当贫富铂层铂载量比为1:2时,单电池测试表现出最优性能,在0.6 V时的电流密度达到了1.05 A·cm^-2,峰值功率密度为0.69 W·cm^-2,较常规单层催化层结构提升了21%。在以Pt-NPs作为基底层时生长Pt-NWs时,得到了梯度分布的双层结构。铂颗粒的存在促进了铂前驱体的还原,并为新形成的铂原子提供了沉积位置。在Pt-NPs基底上生长的Pt-NWs具有更均匀的分布以及更致密的绒毛结构,并且自然形成了一种梯度分布。优化后的Pt-NWs催化层在0.6 V时的电流密度提高了21%。含有双层催化层结构的膜电极具有更高的催化剂利用率,对阴极催化层结构的优化和制备提供了新思路。     

改性钛基PbO2电极的制备及其对COD的快速检测

通过制备Ti/α/β-PbO₂、Ti/Ag/β-PbO₂这两种含有不同中间层的钛基二氧化铅电极来探究电催化氧化技术快速测定葡萄糖模拟废水中有机物(COD)含量的可行性。为了评估两种电极的各项性能,首先采用扫描电镜(SEM)、X射线衍射(XRD)对电极进行形貌表征,其次进行电化学性能测试包括线性伏安曲线(LSV)、塔菲尔曲线(Tafel)、循环伏安曲线(CV)以及交流阻抗测量分析。结果表明,Ti/α/β-PbO₂电极表面晶体结构更加均匀,晶粒尺寸偏小,具有更大的电活性表面积。Ti/α/β-PbO₂电极的析氧电位为1.77 V,为·OH的产生提供良好条件。在Tafel、CV测试中,Ti/α/β-PbO₂电极的交换电流密度i₀及比电容C_p分别为0.0995 A·cm^-1、0.004098 F·cm^-1均高于Ti/Ag/β-PbO₂电极,说明Ti/α/β-PbO₂电极的耐腐蚀性以及释放电子的能力优异。最终选用Ti/α/β-PbO₂电极为工作电极。Ti/α/β-PbO₂电极检测COD的最佳条件为：氧化电位1.30 V、电解时间150 s、电解液浓度0.03 mol·L^-1 硝酸钠(NaNO₃)。电化学法与比色消解法测定COD的相关系数可达0.9909,同时具有良好的重现性与相关性,COD的检测范围为0 mg·L^-1 ~ 500 mg·L^-1。在误差允许的范围内可以替代标准的重铬酸钾法,为实现COD的在线快速检测提供参考价值。     

Hierarchical Porous Tubular Biochar Based Sensor for Detection of Trace Lead (II)

Hierarchical porous tubular biochar (PTBC) was prepared by selectively removing lignin simply according to reverse the pyrolysis sequence of cellulose. The properties of the PTBC sample were characterized by XRD, SEM, TEM, Raman spectra, cyclic voltammetry and electrochemical impedance spectroscopy. The electrochemical performances of PTBC modified on the screen-printing electrode illustrated excellent detection of lead ions (lead (II)) in water with the linear range (0.5–120 μg/L) and the detection limit (0.02 μg/L) by in-situ bismuth film square wave anode stripping voltammetry.     

AgNP-decorated SBA-15 for MWCNT Paste Modified Electrode: A Sensor for Simultaneous Voltammetric Determination of Paracetamol and Sulfamethoxazole

A new electrochemical sensor based on a carbon nanotube paste electrode modified with a Santa Barbara Amorphous material (SBA-15) decorated with silver nanoparticles, namely CNT/SBA/Ag-PE, was developed. It was successfully applied for individual and simultaneous determination of both paracetamol (PC) and sulfamethoxazole (SMZ) medicines. The electrode exhibited a linear dynamic range of 0.12–110 μmol L⁻¹ for paracetamol and 0.06–70 μmol L⁻¹ for sulfamethoxazole, and detection limits of 38 and 19 nmol L⁻¹, respectively. The proposed sensor offered high sensitivity, fast response time and the potential for detecting both drugs simultaneously. The CNT/SBA/Ag-PE enabled the simultaneous determination of PC and SMZ in urine samples with high recovery rates.     

基于认识化学正向价值的教学实践——以“二氧化碳*”为例

模拟大型科普求真类节目《是真的吗？》创设学习氛围;通过基于生活生产实际的“日常灭火可否用N₂代替CO₂”“深海捕获CO₂可否调控温室效应”“石油采矿业中,向油井下注射1吨CO₂可否增产原油3~5吨”“用石灰水可否保鲜鸡蛋”等4个核心问题及3个真假难辨的小问题,引导学生从化学的正向视角深刻认识二氧化碳的性质;利用移动磁贴板设计板书,引导学生经历并建构结构化知识体系。     

磁性分子印迹电化学传感法检测痕量奥卡西平

该文以4-乙烯基吡啶和甲基丙烯酸酯为原料制备了一种可用于检测奥卡西平（OXC）的磁性分子印迹 电化学传感器（MNPs－MIP/MCPE）。首先,依据密度泛函数理论（DFT/B3LYP/6－31 + G）计算,实验成功地 筛选和构建出 OXC与功能单体的最佳组合及比例。随后,基于沉淀聚合法合成了能够识别 OXC的磁性分子 印迹膜（MNPs－MIP）,将MNPs－MIP覆于碳糊电极（MCPE）表面制成MNPs－MIP/MCPE。采用差分脉冲伏安 法（DPV）将 MNPs－MIP/MCPE 传感器用于不同浓度 OXC 的测定。结果显示,传感器的峰电流信号随 OXC 浓 度的增大而增大,且OXC分别在5 × 10－8 ～3 × 10－6 mol/L和3 × 10－6 ～1. 5 × 10－4 mol/L浓度范围内与其峰电流 信号呈线性关系,其线性方程分别为：Ip （μA）= 1. 755 + 1. 097c（μmol/L）,相关系数（r）= 0. 999 7 和 Ip （μA）= 0. 131 + 5. 177c（μmol/L）,r = 0. 999 6。OXC的检出限（LOD = 3S/m）为2. 06 × 10－8 mol/L。该传感器成 功用于实际样品中OXC含量的检测,其回收率为99. 4%~101%,相对标准偏差（RSD）为1. 5%～2. 5%。     

基于硅基硼掺金刚石电极的电化学-原位核磁共振波谱电解池的设计、制备与可行性研究

电化学与核磁共振波谱联用技术（EC-NMR）可以实时监测电化学反应过程,从分子水平阐释反应机理,是一种非常有前景的无损在线检测技术。本文首次报道以硅基硼掺金刚石（Si/BDD）作为工作电极的原位EC-NMR三电极单室电解池的设计和制作。研究表明,由于尺寸12.5 mm × 1.2 mm × 0.5 mm的Si/BDD电极在核磁检测区的体积较小且电极材料厚度较薄,因此该电极对射频场的阻碍较小,对磁场均匀性破坏也相应较小。运用自制的EC-NMR电解池并以经典的对苯二酚（QH ₂）电氧化生成对苯二醌（Q）作为模型体系,原位研究了该电化学反应的整个动态过程。在1.2 V恒电位下电解0.1 mol·L^-1 QH₂ 64分钟,监测到位于6.83 ppm处的Q特征峰逐渐生成,反应过程中核磁谱峰未发生裂分或明显的展宽。结果表明,应用本文所设计并制备的原位EC-NMR电解池,可有效对电化学反应物和产物进行定性、定量分析,将可在后续的电化学原位核磁波谱研究中发挥重要作用。     

MXene-碳黑/硫复合材料在锂硫电池一体式电极的研究

锂硫电池的实际能量密度不高和多硫化物（LiPSs）的穿梭效应等问题严重影响了该电池的实际应用。本文通过将二维的Ti₃C₂T_x Mxene纳米片与碳黑/硫（CB/S）材料进行混合,制备了Ti₃C₂T_x-CB/S正极材料并将其涂覆在商业隔膜（PP）上,最终获得了Ti₃C₂T_x-CB/S-PP一体式电极并用于锂硫电池。利用Ti₃C₂T_x纳米片对CB/S进行修饰,不仅能提高活性物质硫的导电性,还能对扩散的LiPSs进行物理阻挡和化学吸附。而一体式电极的设计有利于提高电池的能量密度。恒流充放电测试结果表明,Ti₃C₂T_x-CB/S-PP电极在0.1 C电流下的初始放电容量为1028.8 mAh·g^-1,高于不含Ti₃C₂T_x的CB/S-PP电极的896.8 mAh·g^-1。Ti₃C₂T_x-CB/S-PP电极还展示出了比基于传统铝箔集流体的Ti₃C₂T_x-CB/S-Al电极更好的循环稳定性,前者在0.5 C下400圈长循环测试中的每圈衰减率为0.072%,而后者则为更高的0.10%。本文利用Ti₃C₂T_x-CB/S构建一体式电极的策略为实现高性能和高能量密度的锂硫电池提供了新的研究方向。     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.     

Novel Potentiometric Solid-contact Electrode for the Determination of Fe2+ Ions via MWCNTs-Gemifloxacin Composite

A novel electrode was fabricated for the quantitation of Fe²⁺ ion. It was based on the covalent attachment of the gemifloxacin molecule (the recognition element) to the surface of MWCNTs to be incorporated as an electroactive material. Linear response of Fe²⁺ ions was found in the concentration range of 1×10⁻² mol L⁻¹ to 1×10⁻⁸ mol L⁻¹ with a Nernstian slope of 30.37 ±0.3 (mV/decade) and attained a stable response within 5 s. The sensor exhibited LOD value of 4.8×10⁻⁹ mol L⁻¹. It was applied in the monitoring of Fe²⁺ concentration in multi-vitamins tablets, tap water and milk samples with acceptable recovery ranged from 94.00 % to 102.00 %.