氧化钡促进的Co/SiO2催化剂的还原性能和分解甲烷活性

 利用等体积浸渍法制备了氧化硅负载钴催化剂．通过程序升温还原、氢化学吸附、氧滴定和催化活性评价等手段研究了氧化钡对Co／SiO2的还原性能、钴分散度和颗粒度、分解甲烷活性及其稳定性等的影响．研究结果表明，氧化钡明显地影响Co／SiO2的还原性能；添加2％氧化钡提高了Co／SiO2在中温（450℃）条件下的还原度；氧化钡的还原对Co／SiO2还原的诱导、氧化钡与氧化硅及与氧化钴之间的相互作用是导致Co／SiO2还原性能变化的原因．氧化钡提高了Co／SiO2的初活性和钴的分散度，降低了钴的颗粒度；添加0．5％～1．5％氧化钡有利于提高Co／SiO2的稳定性．钴的分散度和颗粒度影响Co／SiO2的活性和稳定性；氧化钡的强供电效应也是提高Co／SiO2活性和稳定性的重要因素．甲烷分解生成的碳物种覆盖了钴活性中心，导致Co／SiO2初活性下降；但大部分碳物种并不沉积在钴活性中心上，可能形成了碳纤维生长在载体和钴活性中心之间．     

Review of time lag permeation technique as a method for characterisation of porous media and membranes

The time lag permeation technique has proven to bean effective method for characterisation. Because of the simple nature of the permeation experiment, transport parameters can be directly obtained from experimental data hence avoiding the intensive mathematical treatment required by other techniques. The method has historically been applied to diffusion and adsorption in porous membranes and diffusion in polymer membranes. Since its origins in 1920, interest in the time lag method has expanded because of its value in characterising simple permeation processes and also complex systems of diffusion with simultaneous adsorption and surface diffusion. This review focuses on presenting the asymptotic solution of the mass balance diffusion equations and includes applications of time lag analysis, in order to give a critical and broad perspective of this method as a tool for characterisation. It includes much of the previously published literature in order to show that for most cases the asymptotic solution of the transport equations is simple, and for more complex cases that an analytical solution is possible hence avoiding cumbersome numerical techniques.     

Adsorption from ternary liquid mixtures on silica gel and aluminium oxide

Formation of mixed adsorbed layers was tested for ternary liquid mixtures containing methanol or acetone and the binary solvent benzene+n — heptane. The specific excess adsorption isotherms from the liquid phase were measured on silica gel, silanized silica gel and aluminium oxide. The experimental adsorption data are discussed on the basis of the changes in the mixed solvent composition.     

Supramolecular Templating of Mesopores in Phase-Separating Silica Sol-Gels Incorporated with Cationic Surfactant

Silica gels with hierarchical macropores and mesopores have been prepared by inducing phase separation in the alkoxide-based sol-gel system with an addition of alkyltrimethylammonium salt. Narrowly distributed mesopores were observed in the heat-treated gel samples possibly as a result of supramolecular templating of silica oligomers in the reacting solution. The ionic attractive interaction and hydrophobicity of the attached alkyl group cooperatively determined the phase separation tendency. No indication of long-range order of the mesopores was obtained.     

Fused silica capillary micro-packed columns in gas chromatography

Summary Flexibility, strength and adsorption inertness of fused-silica capillaries permits their extensive application for the preparation of micro-packed columns in gas chromatography. Decreasing the column diameter (from 0.5 to 0.15 mm) and the diameter of the sorbent particles (from 100 to 5 μm) results in a marked reduction of the height equivalent to a theoretical plate (HETP), as well as in diminishing the dependence of the HETP on the carrier gas flow rate. The chromatographic characteristics of fused-silica capillary micro-packed columns and open-tubular columns are compared. The fused-silica capillary micro-packed column can be used to advantage for performing rapid and trace analyses and have been shown to be adapted for application in gas-solid chromatography. Separation of organic and inorganic compounds on fused-silica capillary micro-packed columns is illustrated by practical examples. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

纳米有序体系的模板合成及其应用

评述了以含有高密度的纳米柱形孔道的Al₂O₃膜和有机聚合物膜为模板,制备金属、合金、氧化物、半导体和聚合物及其复合组份的一维纳米结构有序阵列的几种方法、纳米结构的性质和应用的研究进展。可用于模板合成的方法有电化学沉积法、化学镀、化学聚合、化学气相沉积和溶胶-凝胶法等。取决于孔壁和所填充材料的化学性质,所得阵列既可以是由纳米管也可以是由纳米线组成。这样的有序阵列在光学、磁学、催化及电化学等领域有着重要的应用前景。制备新型复合纳米结构有序阵列、开展纳米器件的研制是模板合成研究领域的重要方向。     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

介孔分子筛MSU-1的合成

MSU X介孔分子筛具有三维立体交叉排列的蠕虫状孔道结构,有利于客体分子在其孔道内扩散[1]。目前合成MSU X的原料[2 4]TEOS水解速度慢,合成过程较易控制,但价高、易燃、有刺激性。本文采用文献[5 7]法,以水玻璃、A(EO)9为原料,在酸性至近中性的范围里合成了MSU 1介孔分子筛,与TEOS为原料的MSU 1合成进行了比较,考察了pH值和不同类型表面活性剂(脂肪醇聚氧乙烯醚和烷基酚聚氧乙烯醚)对产物结构性质的影响。1　实验部分1 1　试剂和仪器水玻璃(SiO2%≈26、Na2O%≈8),工业级,青岛海洋化工厂生产;脂肪醇聚氧乙烯醚非离子表面活性…     

Sedimentation and drying dissipative structures of colloidal silica (1.2 μm in diameter) suspensions in a glass dish and a polystyrene dish

Sedimentation and drying dissipative structural patterns formed in the course of drying colloidal silica spheres (1.2 μm in diameter) in aqueous suspension have been studied in a glass dish and a polystyrene dish. The broad ring patterns are formed within a short time in suspension state by the convection flow of water and colloidal spheres. The broad ring patterns are not formed when a dish is covered with a cap, which demonstrates the important role of the convectional flow of silica spheres and water accompanied with the evaporation of water on the air-suspension interface. The sedimentary spheres always move by the convectional flow of water, and the broad ring patterns became sharp with time. Broad ring and microscopic fine structures are formed in the solidification processes on the bases of the convectional and sedimentation patterns. Drying patterns of the colloidal suspensions containing sodium chloride are star-like ones, which strongly supports the synchronous cooperative interactions between the salt and colloidal spheres.