基于FHW的火箭发动机环境载荷评估

针对固体火箭发动机环境载荷的诸多不确定性,提出了环境载荷FHW量化评估算法.对比分析了火箭发动机的典型环境条件及其影响,采用熵值法确定了指标权重,基于FHW方法建立了火箭发动机的环境载荷评估模型,根据环境因素的分布特征给出评估指标的隶属函数,并获取其相应的灰色关联系数.算例验证了不同环境载荷因素对火箭发动机的影响程度,结果表明FHW评估策略和算法简单易行、精度高,在装备环境载荷量化评估中具有参考和应用价值.     

气候政策的经济环境效应分析与比较—基于碳税、许可交易和总量控制的动态微分博弈

基于产品差别化假设,建立双寡头动态微分博弈模型,比较碳税和许可交易以及总量控制3种气候政策的经济环境效应.研究发现,不同气候政策对两国的经济效应不同.进一步研究还发现,在企业产品差别化竞争时,从碳排放流量来看,碳税政策和许可交易政策与总量控制政策之间没有严格的优劣之分;碳排放存量对碳税政策最敏感.从碳存量对政策的边际影响来看,许可交易政策与总量控制政策是相同的,而碳税政策与之相反.当两国生产的产品完全同质时,从均衡碳排放流量和碳排放存量来看,许可交易政策最优,总量控制政策次之,碳税政策最差.若政府单纯以控制碳排放量为目的,许可交易政策是最佳选择.     

Introducing nonlinear,multivariate ‘Predictor Surfaces’ for quantitative modeling of chemical systems with higher-order,coupled predictor variables

Innovations in chemometrics are required for studies of chemical systems which are governed by nonlinear responses to chemical parameters and/or interdependencies (coupling) among these parameters. Conventional and linear multivariate models have limited use for quantitative and qualitative investigations of such systems because they are based on the assumption that the measured data are simple superpositions of several input parameters. ‘Predictor Surfaces’ were developed for studies of more chemically complex systems such as biological materials in order to ensure accurate quantitative analyses and proper chemical modeling for in-depth studies of such systems. Predictor Surfaces are based on approximating nonlinear multivariate model functions by multivariate Taylor expansions which inherently introduce the required coupled and higher-order predictor variables.     

Vanadium Chloroperoxidases: The Missing Link in the Formation of Chlorinated Compounds and Chloroform in the Terrestrial Environment?

It is well established that the majority of chlorinated organic substances found in the terrestrial environment are produced naturally. The presence of these compounds in soils is not limited to a single ecosystem. Natural chlorination is also a widespread phenomenon in grasslands and agricultural soils typical for unforested areas. These chlorinated compounds are formed from chlorination of natural organic matter consisting of very complex chemical structures, such as lignin. Chlorination of several lignin model compounds results in the intermediate formation of trichloroacetyl‐containing compounds, which are also found in soils. These decay, in general, through a haloform‐type reaction mechanism to CHCl₃. Upon release into the atmosphere, CHCl₃ will produce chlorine radicals through photolysis, which will, in turn, lead to natural depletion of ozone. There is evidence that fungal chloroperoxidases able to produce HOCl are involved in the chlorination of natural organic matter. The objective of this review is to clarify the role and source of the various chloroperoxidases involved in the natural formation of CHCl₃.     

Ordered long‐helical conformation of isotactic polypropylene obtained in constrained environment of nanoclay

Special crystallization event of isotactic polypropylene (iPP) in a constrained environment, a layered clay network, was followed by in situ Fourier transform infrared (FTIR) spectroscopy during the cooling process. Before occurrence of nucleation/crystallization, a conformationally ordered phase, which consists of significant amounts of long 3₁ helices with 14 monomeric units, has been identified for the first time. More importantly, it was found that the long‐ordering helices could play a more important role than short ones for the confined crystallization. It could be tentatively explained as due to the existence of constrained regions in the proximity of the nanoclay platelets or tactoids and the heterogeneous nucleation capability of the surface of nanoclay. Copyright © 2011 John Wiley & Sons, Ltd.     

The 1/f noise in multiwalled carbon nanotubes

The $1/f$ noise in multiwalled carbon nanotubes bundles has been investigated between the frequency range of 0.1 to 30 Hz. At room temperature the noise spectrum is standard 1/f, and its level is proportional to the square of the bias voltage. With decreasing temperature the noise level also decreases. At 4.2 K the noise level follows a non-monotonic dependence against the bias voltage, showing a peak at a certain bias voltage, meanwhile its frequency dependence also deviates from the 1/f trend. This anomalous behaviour is discussed within the picture of environmental quantum fluctuation of charge transport in the samples.     

Nanoparticulate materials and regulatory policy in Europe: An analysis of stakeholder perspectives

The novel properties of nanoparticulate materials (NPM) and the rapid development of NPM based products have raised many unanswered questions and concerns by different stakeholders over its consequences for the environment and human health. These concerns have led to an increasing discussion in both the US and Europe about possible regulatory policies for NPM. In this article a comparative study of stakeholders’ perceptions on regulatory policy issues with NPM in Europe is presented. It was found that industry wants to regulate this area if the scientific evidence demonstrates that NPM are harmful, but also that the regulatory bodies do not find it necessary at this point of time to regulate until scientific evidence demonstrates that NPM are harmful. This research therefore shows that there will most likely not be any regulatory interventions until there is an established and convincing scientific knowledge base demonstrating that NPM can be hazardous. It is furthermore discussed in this article the different roles and responsibilities of the stakeholders in financing the research required to establish the necessary level of fundamental scientific evidence. It was also found that the activity of the regulatory bodies on this issue differ between the European countries.     

International Atomic Energy Agency's contributions to advances in nutritional and environmental metrology

For more than three decades the International Atomic Energy Agency (IAEA) has supported projects on food, nutrition and environment for strengthening the analytical capabilities in developing countries (DCs). Over time, such efforts have led to the development of proper study designs, harmonization of sampling protocols, adequate contamination control and evaluation of the suitability of competing analytical techniques for the determination of specific analytes. Collectively, these consistent IAEA initiatives have promoted harmonization of chemical measurements thus facilitating comparability of results of filed investigations. Importantly, the Agency's efforts have infused a measure of metrological awareness in measurements carried out in field studies, including physiological measurements. Nuclear and isotopic techniques have played an important role in reaching these goals by establishing reliable measurement processes for application in health care studies.     

On the use of nickel foil strain gages at varying temperatures

When a strain gage made of nickel foil attached on the surface of a specimen is subjected to repeated loads, the elastic stress is measured by observing slip-bands in the foil resulting from repeated strain. Calibration studies with rotating-bending tests at various temperatures between room temperature and 350°C are performed on round steel bars with nickel foil. The relation between the threshold stress for the first appearance of slip-bands and the number of stress cycles is examined at varying temperatures, which provides the calibration values of the nickel foil tested at varying temperatures. Assuming that the first appearance of slip-bands is based on the linear cumulative damage law, the calibration values at varying temperatures are calculated from those established by the calibration tests at several constant temperatures. It is found that the calculated calibration values agree well with the results obtained by the calibration tests at varying temperatures and that the calculation applying the linear cumulative damage law is a useful method to presume the calibration values at varying temperatures without performing the experiment.     

PALEOMONSOONS OF CHINA OVER THE LAST 130,000 YEARS——PALEOMONSOON VARIATION

Based upon the effect of land-sea interaction on the paleomonsoon variation and the time series of climatic proxy-indicators, the historical Asian monsoon variation over the last 130,000 and 18,000 years has been reconstructed with an emphasis on the basic characteristics of summer monsoon circulation. The monsoon-climatic cycles and associated model of environmental development over the central and eastern China are proposed and the mechanism of paleomonsoon variation of China preliminarily discussed. The variation of East Asian monsoon circulation should be regarded as a regional result of both solar-radiation changes and the global glacial-interglacial cycles. The episodic uplifting of the Qinghai-Xizang Plateau since the late Miocene has to a large extent controlled the forming and evolution of the paleomonsoon circulation of China.