基于QuEChERS净化/气相色谱法测定蔬菜及水果中16种有机氯农药残留

该文建立了蔬菜及水果中16种有机氯农药残留的QuEChERS净化/气相色谱快速检测方法。样品经1%冰乙酸乙腈处理,QuEChERS净化,气相色谱分离后,以色谱峰保留时间定性,外标法定量。结果表明:16种有机氯农药在2.0~100μg/L质量浓度范围内的线性关系良好,相关系数均大于0.99,检出限为0.16~2.90μg/L,在4种基质(油菜、黄瓜、橙子、苹果)中的加标回收率为70.1%~119%,相对标准偏差(RSD)为0.23%~5.2%。与其它前处理方法相比,该方法简便、快速、准确、高效,可用于蔬菜及水果样品中有机氯残留的高通量快速筛查。     

三功能策略设计制备具有优异低温抗积碳性能的Ni-CeO2@SiO2催化剂催化甲烷干重整反应

随着全球人为温室气体排放量(主要是甲烷和二氧化碳)的增加,全球变暖的趋势逐渐增加,因此,迫切需要通过各种技术来捕获和利用这些温室气体.甲烷干气重整反应(DRM)可以有效地将甲烷和二氧化碳这两种资源丰富、价格低廉的温室气体转化为高附加值化学品,减少它们向大气排放.尽管DRM工艺的应用具有许多优势,但是反应期间碳沉积和活性组分的烧结是阻碍其工业应用的两个主要原因.这些碳沉积物可能覆盖活性中心或阻塞催化剂的孔道,从而导致催化剂活性降低.镍基催化剂因其价格低廉、初始活性高和资源丰富而得到广泛的应用.但应用于DRM反应的Ni基催化剂在反应中容易烧结和积碳,导致催化剂迅速失活.为解决上述问题,本文从三功能策略角度出发,即SiO2壳层的限域作用和Ni-Ce之间的协同作用以及CeO2的消除积碳作用,采用原位一锅法设计合成了一种限域型Ni-CeO2核壳结构催化剂(Ni-CeO2@SiO2).通过X射线衍射、透射电子显微镜、能量色散X射线光谱、N2吸附/脱附、氢气程序升温还原和脱附、氧气程序升温脱附、拉曼光谱、热重分析和原位漫反射红外傅里叶变换光谱测试对催化剂进行了系统的表征,来揭示催化剂的理化性质和反应机理.催化剂应用于甲烷干气重整反应结果表明,在温度区间为550～800℃时,与传统浸渍法合成的催化剂相比,Ni-CeO2@SiO2催化剂具有更高的活性.高温800℃下的稳定性测试结果显示,传统浸渍法合成的催化剂在反应20 h后就出现了大量的积碳且活性下降明显;而Ni-CeO2@SiO2催化剂在800℃下反应100 h后未检测到积碳,并且催化剂中的Ni纳米颗粒的平均粒径从5.01 nm仅增长到5.77 nm,表现出很好的高温抗积碳和耐烧结性能.值得注意的是,Ni-CeO2@SiO2催化剂在低温600℃(形成碳沉积的最可能温度区域)下反应20h后也未检测到积碳的形成,表现出催化剂良好的低温稳定性和抗积碳性能.这可能归因于对Ni-CeO2@SiO2催化剂的三功能作用,即多孔二氧化硅壳层的限域作用、Ni与CeO2之间强的金属-金属氧化物相互作用以及具有丰富活性氧物种CeO2的消除积碳的作用.通过原位漫反射红外傅里叶变换光谱测试来探究反应机理.结果 表明,DRM反应在Ni-CeO2@SiO2催化剂上遵循L-H机理,添加CeO2可以消除碳沉积并促进CO2活化.该三功能策略为设计其他应用于DRM的高性能催化剂提供了指导,有望加快该工艺的工业化.     

气相色谱-质谱法同时测定水果中9种保鲜剂的残留量

建立了采用气相色谱-质谱(GC-MS)同时测定水果中9种保鲜剂残留量的分析方法。水果样品用正己烷/乙酸乙酯(1/1,v/v)混合提取剂超声提取,经Florisil层析柱净化后用正己烷/乙酸乙酯(1/3,v/v)混合洗脱剂洗脱,以磷酸三苯脂(TPP)为内标物,采用GC-MS的全扫描方式(SCAN)和选择离子监测方式(SIM)对9种保鲜剂进行定性与定量分析。实验结果表明,9种保鲜剂的检出限(LOD)为0.10~2.16μg/kg,在50、100、200μg/kg添加水平下的回收率为75.3%~128%,相对标准偏差为1.57%~11.6%。本分析方法样品前处理简便,净化效果明显,在SIM谱图中分析目标物响应值大、灵敏度高,定量准确可靠,能够满足保鲜剂痕量残留的检测要求。     

CH4 reforming with CO2 for syngas production over La2O3 promoted Ni catalysts supported on mesoporous nanostructured γ-A12O3

Nanostructured -y-A12O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2 adsorption-desorption, TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2.g-1 and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and Oxide to drv reformin feed increased the methane conversion and led to carbon free ooeration in combined orocesses.     

Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming

The paper reports the development of cement clinker-supported nickel （with metal loadings of 5 wt%, 10 wt%, 15 wt% and 20 wt%） catalysts for glycerol dry （CO2） reforming reaction. XRF results showed that CaO constituted 62.0% of cement clinker. The physicochemical characterization of the catalysts revealed 32-folds increment of BET surface area （SBET） with the addition of nickel metal into the cement clinker, which was also corroborated by FESEM images. Significantly, XRD results suggested different types of Ni oxides formation with Ni loading, whilst Ca3SiO5 and Ca2Al0.67Mn0.33FeO5 were the main crystallite species for pure cement clinker. Temperature-programmed reduction analysis yielded three domains of H2 reduction peaks, viz. centered at approximately 750 K referred to as type-Ⅰ peaks, another peaks at 820 K denoted as type-Ⅱ peaks and the highest reduction peaks, type-Ⅲ recorded at above 1000 K. 20 wt% Ni was found to be the best loading with the highest XG and H2 yield, whilst the lowest methanation activity. Syngas with lower H2/CO ratios （0.6 to 1.5） were readily produced from glycerol dry reforming at CO2-to-Glycerol feed ratio （CGR） of unity. Nonetheless, carbon deposit comprised of whisker type （Cv） and graphitic-like type （Cc） species were found to be in majority on 20 wt%Ni/CC catalysts.     

Photoassisted Selective Steam and Dry Reforming of Methane to Syngas Catalyzed by Rhodium–Vanadium Bimetallic Oxide Cluster Anions at Room Temperature

Photoassisted steam reforming and dry (CO₂) reforming of methane (SRM and DRM) at room temperature with high syngas selectivity have been achieved in the gas-phase catalysis for the first time. The catalysts used are bimetallic rhodium–vanadium oxide cluster anions of Rh₂VO_1–3⁻. Both the oxidation of methane and reduction of H₂O/CO₂ can take place efficiently in the dark while the pivotal step to govern syngas selectivity is photo-excitation of the reaction intermediates Rh₂VO_2,3CH₂⁻ to specific electronically excited states that can selectively produce CO and H₂. Electronic excitation over Rh₂VO_2,3CH₂⁻ to control the syngas selectivity is further confirmed from the comparison with the thermal excitation of Rh₂VO_2,3CH₂⁻, which leads to diversity of products. The atomic-level mechanism obtained from the well-controlled cluster reactions provides insight into the process of selective syngas production from the photocatalytic SRM and DRM reactions over supported metal oxide catalysts.     

Carbohydrate Hydrolase-Inhibitory Activity of Juice-Based Phenolic Extracts in Correlation to Their Anthocyanin/Copigment Profile

Red fruits and their juices are rich sources of polyphenols, especially anthocyanins. Some studies have shown that such polyphenols can inhibit enzymes of the carbohydrate metabolism, such as α-amylase and α-glucosidase, that indirectly regulate blood sugar levels. The presented study examined the in vitro inhibitory activity against α-amylase and α-glucosidase of various phenolic extracts prepared from direct juices, concentrates, and purees of nine different berries which differ in their anthocyanin and copigment profile. Generally, the extracts with the highest phenolic content—aronia (67.7 ± 3.2 g GAE/100 g; cyanidin 3-galactoside; chlorogenic acid), pomegranate (65.7 ± 7.9 g GAE/100 g; cyanidin 3,5-diglucoside; punicalin), and red grape (59.6 ± 2.5 g GAE/100 g; malvidin 3-glucoside; quercetin 3-glucuronide)—showed also one of the highest inhibitory activities against α-amylase (326.9 ± 75.8 μg/mL; 789.7 ± 220.9 μg/mL; 646.1 ± 81.8 μg/mL) and α-glucosidase (115.6 ± 32.5 μg/mL; 127.8 ± 20.1 μg/mL; 160.6 ± 68.4 μg/mL) and, partially, were even more potent inhibitors than acarbose (441 ± 30 μg/mL; 1439 ± 85 μg/mL). Additionally, the investigation of single anthocyanins and glycosylated flavonoids demonstrated a structure- and size-dependent inhibitory activity. In the future in vivo studies are envisaged.     

Substructure of Titanium Dioxide Agglomerates from Dry Ball-milling Experiments

The calciner discharge of TiO₂ white pigments from the sulphate process is ground batchwise in a planetary ball mill, varying the energy of comminution between 0 and 5.1 times the earth's gravitational constant. Particle sizes and specific surfaces of the ground products reveal that the calciner discharge consists of aggregates of 430nm diameter built from 160–210nm TiO₂ crystals. The contact area of a primary particle in an aggregate is about 15% of its surface. The success in comminution of aggregates as a function of grinding energy follows Kick's law. The theory by Rose and Weichert is used to quantify the mechanical strength of the aggregates. Ca. 20% of the aggregates are further agglomerated to granules of ca. 35µm. At all energy levels above a certain threshold, agglomerates break directly into aggregates.     

Moisture Removal from a Two-Layer Porous Media: A Conceptual Model and Experimental Results

Moisture removal from a two-layer porous media in which air is circulated through one layer and moisture is removed from the second has not been well studied due to the emphasis given to single-layer systems. This two-layer configuration is common in natural and engineered systems and can be used as a means to create a barrier to downward migrating fluids and to remove liquids and gases that may be present in the finer layer. However, there is little data on moisture removal from a two-layer porous media in which air is circulated through one layer parallel to the interface and moisture is removed from the finer second layer by evaporation. A conceptual model of the moisture removal from a two-layer porous media system was developed and compared to experimental moisture removal rates from laboratory scale dry barriers. The limited experimental data agrees well with the results predicted by the conceptual model, providing an initial validation.     

Heavy tailed durations of regional rainfall

Durations of rain events and drought events over a given region provide important information about the water resources of the region. Of particular interest is the shape of upper tails of the probability distributions of such durations. Recent research suggests that the underlying probability distributions of such durations have heavy tails of hyperbolic type, across a wide range of spatial scales from 2 km to 120 km. These findings are based on radar measurements of spatially averaged rain rate (SARR) over a tropical oceanic region. The present work performs a nonparametric inference on the Pareto tail-index of wet and dry durations at each of those spatial scales, based on the same data, and compares it with conclusions based on the classical Hill estimator. The results are compared and discussed. The authors express sincere thanks to the Mathematisches Forschungsinstitut Oberwolfach (MFO) for facilitating their collaboration under a “Research in Pairs” project hosted at MFO during March 5–25, 2006. The research of the second and third authors was supported by the project LC06024.