High solids content emulsion terpolymerization of vinyl acetate,methyl methacrylate and butyl acrylate. II. Open loop composition control

A method for the calculation of the optimal monomer addition policies for polymer composition control in emulsion terpolymerization is developed. The method is applied to reactors with and without limited heat removal capacity. A mathematical model that incorporates the main features of the vinyl acetate/methyl methacrylate/butyl acrylate high solids content emulsion terpolymerization system allows the calculation of the composition of the initial charge of the reactor and the time-dependent monomer addition rates required. © 1994 John Wiley & Sons, Inc.     

Preparation and properties of polymer and quantum dot composites

Quantum dots (QDs) were prepared in an organic system through a simple and low-cost wet chemistry method. Polymer beads with a diameter of 60–70 nm and specific functional groups were synthesized by a particular seeded emulsion polymerization technique. QDs were embedded in the polymer beads with the specific functional groups through dissolving and swelling method, which provided the condition for the conjunction of biomolecules and QDs as fluorescent probes. The prepared composites were characterized with UV-Vis, PL, TEM, FTIR, CLSM and conductance titration etc. The results show that QDs are successfully embedded in polymer beads, which breaks the limitation that the conjunction of biomolecules and QDs can be achieved only for those synthesized in aqueous system. __________ Translated from Journal of Shanghai Jiaotong University, 2005, 39(1) (in Chinese)     

乙烯基聚硅氧烷共聚反应竞聚率的测定及其对复合粒子形态的影响

用Ｆｉｍｅｍａｎ－Ｒｏｓｓ法处理数据，测定了乙烯基聚硅氧烷（ＳＶ）与苯乙烯（ＳＴ）、甲基丙烯酸甲酯（ＭＭＡ）和甲基丙烯酸正丁酯（ｎ－ＢＭＡ）的共聚反应的竞聚率，结果为ｒＳＴ＝１．４５和ｒＳＶ＝１．０８，ｒＭＭＡ＝０．７８和ｒＳＶ＝２．０１，ｒｎ－ＢＭＡ＝０．４６和ｒＳＶ＝３．４９．以含ＳＶ的乳液作为种子进行烯类单体的乳液聚合，单体和ＳＶ共聚反应对复合粒子的形态有很大影响。     

原油乳状液稳定性和破乳研究进展

本文从控制乳状液稳定性的一些因素－界面膜、界面张力、双电层、空间位阻、固体粒子、液晶、油相溶解度、连续相粘度等方面综述了有关乳状液稳定性的一些研究进展。对国内外有关原油乳状液的破乳研究也做了综述。同时，介绍了应用于乳状液稳定性研究的新的实验技术和仪器。     

聚(苯乙烯-丙烯酸)磁性高分子微球的制备和表征

利用双层表面活性剂改性的Fe3O4磁流体为种子,通过乳液聚合法考察了苯乙烯或苯乙烯-丙烯酸对Fe3O4磁流体的包覆情况,并考察了丙烯酸浓度及加入时间对磁性微球表面羧基含量的影响.结果表明,丙烯酸的加入可以明显改善包覆效果,在反应进行2h后加入0.4mL的丙烯酸可以得到包覆效果好且表面羧基含量大的磁性微球.     

Nondestructive Monitoring of Sucrose Diffusion in Oil-in-Water Emulsions by Ultrasonic Velocity Profiling

The diffusion of sucrose through an optically opaque oil-in-water emulsion was monitored nondestructively by measuring the ultrasonic velocity as a function of height. Initially, a corn oil-in-water emulsion (0, 5, 10, 15, or 20 wt% oil) stabilized by Tween 20 (1 wt%) and xanthan (1 wt%) was placed in a measurement cell at 30°C. A 20 wt% sucrose solution containing the same concentration of Tween 20 and xanthan as the aqueous phase in the emulsion was placed on top of the emulsion. The ultrasonic velocity of this two-layer system was measured as a function of sample height and time and then converted into sucrose and oil concentration–distance profiles using empirical calibration curves. The translational diffusion coefficient of the sucrose in the upper and lower layers was determined by fitting the experimental data to a Fickian diffusion model. The measured diffusion coefficients of the sucrose molecules decreased as the droplet concentration in the emulsion increased, indicating retardation of the sugar molecule movement. Ultrasonic profiling was also used to monitor the compression of the emulsion due to movement of water molecules into the upper layer.     

苯乙烯-丙烯酸酯微乳液的合成研究

目前国内外许多专家学者积极研发低污染、低能耗、高性能的胶粘剂,以代替传统的毒性大、成本高、稳定性差的溶剂型胶粘剂[1]。苯乙烯-丙烯酸酯微乳液(苯-丙微乳液)是重要的胶粘剂之一。与常规乳液胶粘剂相比,它具有以下几个特点[2]:(1)是热力学稳定体系,可以自发形成;(2)分子粒     

Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

单体极性对甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸钠无皂乳液共聚合的影响

研究了少量甲基丙烯酸钠（ＮａＭＡ）存在下单体极性对甲基丙烯酸甲酯（ＭＭＡ）／丙烯酸丁酯（ＢＡ）无皂乳液共聚合的影响．单体极性降低，使粒径减小、聚合速率提高、乳液表面张力和粘度降低、粒子表面电荷密度增大、聚合物分子量提高．ＭＭＡ／ＮａＭＡ无皂乳液聚合物只呈现一个玻璃化温度Ｔｇ，ＢＡ／ＮａＭＡ无皂乳液聚合物呈现两个Ｔｇ，ＭＭＡ／ＢＡ比为２∶１～１∶２的ＭＭＡ／ＢＡ／ＮａＭＡ无皂乳液聚合物呈现四个Ｔｇ，这是由于粒子外面相对富含ＯＳＯ－３和ＣＯＯ－基聚合物的亚层溶解了较多的水，使ＢＡ向粒子中心扩散，ＭＭＡ向外扩散，造成组成差异和相分离而引起的．     

配糖蛋白B肠溶微胶囊的研究

采用双乳液法研制配糖蛋白Ｂ的肠溶微胶囊，考察了微胶囊的形态、粒径及其分布，在摸拟肠液的缓冲液中进行溶解释放试验。配制了两种口服微胶囊混悬制剂，并考察了它的稳定性。