LaC_3~n(n=-1,0,+1)分子簇的理论研究(英文)

用密度泛函方法研究了ＬａＣ３ｎ（ｎ＝－１，０，＋１）分子簇的结构和稳定性，对这个四原子体系，提出了５种可能构型，其中３种具有Ｃ２ｖ对称性，２种为Ｃ∞ｖ对称性．在Ｃ２ｖ对称性结构中，其中１个为Ｌａ接在弯曲的Ｃ３链上，第２个是Ｌａ通过２个键与Ｃ３环相链，第３个是Ｌａ通过１个键与Ｃ３环相连；在Ｃ∞ｖ对称性中，第１个Ｌａ接在Ｃ３链的一端，而在第２个构型中，Ｌａ被插入在Ｃ３链中．结果表明，环状结构当Ｌａ接在弯曲的Ｃ３链上的是局域极小值并且最稳定     

脱铝八面沸石的研究(Ⅳ)——异丙苯催化裂化

以脉冲微型反应技术研究了脱铝八面沸石对异丙苯的催化裂化行为,并与反应条件下表面酸性进行了关联。样品裂化活性随骨架Si/Al比增加呈山峰形变化,Si/Al=5.38时最大;反应条件下酸中心数随脱铝深度增加却单调降低。动力学数据表明,样品裂化反应速度常数与强质子酸中心数随骨架Si/Al比增加具有平行的山峰形变化规律,Si/Al比为8.87附近的样品最高。     

亮氨酸与异亮氨酸在金/银核-壳复合纳米粒子上的吸附状态

The Raman spectra and Surface enhanced Raman spectra (SERS) of leucine and isoleucine adsorbed on core-shell Au/Ag nanoparticles were obtained and assigned, and the different Raman peaks resulting from different vibrational models of the isomers忆groups were analysed. In Raman spectra, the leucine’s (ω(CH3)) is at 962, 945, 924 cm-1, (δas(CH3)) at 1408, 1454 cm-1; corresponding values for isoleucine are, 922 cm-1 and 1448, 1420, 1394 cm-1, respectwely. The difference in the peak positions of corresponding groups between leucine and isoleucine is more apparent in the SERS at acidic and basic conditions. The relationship between leucine and isoleucine’s concentration and SERS was interpreted preliminarily and the adsorption model on the core-shell Au/Ag nanoparticle surface was speculated.     

Analysis by liquid chromatography‐tandem mass spectrometry of biophenolic compounds in virgin olive oil,Part II

In this study the qualitative and quantitative content of the biophenolics in virgin olive oils is evaluated by liquid chromatography‐tandem mass spectrometry. The extraction and purification method for these compounds from virgin oils was optimised. After liquid‐liquid and solid‐phase extraction the separation of 35 of these compounds was achieved on reversed phase in gradient mode. The detection was preliminarily by UV and fluorescence, but then the final choice was ion‐spray tandem mass spectrometry in multiple reaction monitoring mode in negative ionization, acquiring two diagnostic product ions from the chosen precursor [M—H]^–. Using this last approach we obtained the best sensitivity, selectivity, and specificity. The recovery of the method ranged from 70–90% and detection limits were less than 1 ng for all the analyzed compounds.     

LiCl对Fe_2O_3/SiO_2甲烷氧化偶联反应的助催化作用

使用穆斯堡尔谱，ESR和XRD等技术表征了未添加助剂和添加LiCl的Fe2O3／SiO2催化剂．XRD结果指出，添加LiCl的Fe2O／SiO2催化剂出现铁酸盐和α-方石英的衍射峰，这种结果的出现与该催化剂有较高的C2烃选择性密切相关。穆斯堡尔谱结果表明：添加LiCl的Fe2O3／SiO2催化剂有更高的结构对称性．这种结构对分子氧的活化起着重要的作用．氯的存在大大降低了氧的离解吸附的速率，减少了原子氧的吸附位的数目，并可除去吸附的原子氧，该氧种对COx的生成有利．     

高性能纳米碳材料改性Cu/ZnO/Al2O3甲醇水蒸汽重整制氢催化剂

由铜基催化剂催化甲醇水蒸汽重整制氢是有效解决车载燃料电池等制氢需求的潜在途径．但传统铜基催化剂对该反应的低温催化活性及制氢选择性均不理想．近年来碳纳米管及活性碳纤维等因具有独特的纳米孔结构、高比表面积和优异的吸附性能作为潜在的新型催化材料而备受关注．     

PHOTOCATALYTIC HYDROGEN EVOLUTION FROM WATER SPLITTING UNDER VISIBLE LIGHT IRRADIATION ON NOVEL PHOTOCATALYST FULLENES-PVP-ZN0.999NI0.001S

Fullerenes (C60/C70) linked up to Ni-doped ZnS through the medium of an amphalic polymer polyvinyl pyrrolidone (PVP) to form a new kind of photocatalyst for hydrogen evolution from aqueous Na2S/Na2SO3 solution under visible light irradiation, the photocatalytic activities of this novel photocatalyst C60/C70-PVP-Zn0.999Ni0.001S are 3-5 fold higher compared with that of precurse catalyst Zn0.999Ni0.001S. This result could be attributed to Schottky barrier layer built between C60/C70 and Zn0.999Ni0.001S due to the electro-negativity of C60 and characteristic of being used as a multiple electron acceptor. C60 or C60/C70, its moiety, with its low energy first excited singlet state, is a good energy acceptor and in addition readily accepts multiple electrons, making it a potential electron accumulate as we know, which could protect the separation between electrons and holes against combination. This is an important reason for the marked increase of amount of H2 evolution during the photocatalytic process for the composite system C60/C70-PVP-Zn0.999Ni0.001S.     

还原对Ag/SiO2催化剂高效合成吲哚的影响

以Ag／SiO2作为苯胺和乙二醇一步合成吲哚的催化剂，首次研究了还原对催化剂活性和选择性的影响．结果表明，催化剂前体在150℃以下用氢气含量不超过50%(mol)的氢-氮混合气原位还原其活性和选择性较高．     

制备方法对MoO_3／ZrO_2结构的影响及MoO_3／ZrO_2固体超强酸的结构特征 Ⅰ．ZrO_2的形态与样品比表面的研究

ＸＲＤ，ＤＴＡ，比表面测定等结果表明，制备方法对ＭｏＯ３／ＺｒＯ２结构有决定性影响．仲钼酸铵浸渍仅经干燥的Ｚｒ（ＯＨ）４再经高温焙烧所得团体超强酸ＭｏＯ３／ＺｒＯ２（Ⅰ）与浸渍晶态ＺｒＯ２所得部分氧化催化剂ＭｏＯ３／ＺｒＯ２（Ⅱ）的载体形态有明显不同．（１）ＭｏＯ３／ＺｒＯ２（Ⅰ）的比表面数倍于ＭｏＯ３／ＺｒＯ２（Ⅱ）；（２）ＭｏＯ３含量增加时，ＭｏＯ３／ＺｒＯ２（Ⅰ）的比表面逐步增大至一极大值再缓缓下降，而ＭｏＯ３／ＺｒＯ２（Ⅱ）的比表面随ＭｏＯ３含量增加而单调下降；（３）在ＭｏＯ３／ＺｒＯ２（Ⅰ）中，ＺｒＯ２以介稳四方相存在，而在ＭｏＯ３／ＺｒＯ２（Ⅱ）中则是稳定的单斜相．在此基础上研究了事先引入的活性组分在载体织构形成过程中的作用，包括延迟ＺｒＯ２晶化，阻碍晶粒长大及与之相关的相变等，并讨论了ＭｏＯ３／ＺｒＯ２（Ⅰ）中ＭｏＯ３最佳含量的科学含义．     

CoMo／Al_2O_3和CoMo／TiO_2－Al_2O_3加氢脱硫催化剂的研

研究了ＣｏＭｏ／Ａｌ２Ｏ３和ＣｏＭｏ／ＴｉＯ２－Ａｌ２Ｏ３催化剂的加氢脱硫性能，并用ＬＲＳ，ＸＲＤ和ＴＰＳ等方法表征其表面相结构和硫化行为．结果表明，以ＴｉＯ２－Ａｌ２Ｏ３为担体的Ｍｏ和ＣｏＭｏ催化剂的活性均比相应的Ａｌ２Ｏ３为担体的高；少量Ｃｏ，Ｎｉ助剂的引入可显著提高ＭｏＯ３在担体上的分散度和改进催化剂的活性；Ｃｏ助剂还有降低Ｍｏ物种硫化温度的作用．