固相微萃取-气相色谱联用技术分析混合气体中微量氢

制备钯-5A分子筛萃取头,使用固相微萃取-气相色谱联用技术,建立了对混合气体中微量氢气的分析方法.实验结果表明,含氢浓度在0.0011~0.1250 mL/L范围内,具有良好线性关系,检出限为9×10-4mL/L.此方法和气相色谱法比较,有更高的灵敏度和更少的干扰,2种方法的标准偏差为8.7%.     

铜铝合金中γ_2相沉淀的分析电镜研究

Cu-12.7(wt)%Al合金从900℃高温淬至365℃～500℃温度范围等温不同时间(30秒至15分钟)的试样中形成了大量树枝状的γ_2相沉淀粒子。应用配有X线能谱仪(XEDS)和电子能量损失谱仪(EELS)的分析电子显微镜(JEOL JEM-2000FX型)对上还试样研究,结果表明:这些γ_2相粒子具有富铝的“核心”,长大到粒子线度大于约800nm后以不稳定方式生长成“花朵”状。生长过程中伴随着溶质元素Al由基体向γ_2相内的富集。而且在γ_2相粒子内部呈现出Spinodal分解组织的形貌特征,表明γ_2粒子内形成了化学成分调幅。EELS分析表明试样含氧。     

Mg-Nd-Zr-Zn合金的制备及钕对合金组织性能的影响

在RJ-2溶剂和Be的联合保护下制备了Mg-Nd-Zr-Zn系合金. 通过对合金组织的分析, 以及Nd对组织性能影响的研究, 试制出了Nd添加量合理的Mg-Nd-Zr-Zn合金. 经过测试, 认为Nd添加量的增加提高了合金的250 ℃高温抗拉强度, 当Nd添加量超过2.8%时, 合金的高温强化作用不十分显著. Mg-Nd-Zr-Zn合金在250 ℃时的拉伸断裂方式主要是韧性断裂.     

{Cu[H_2NC(CH_2OH)_3]_2}{Pic}_2·H_2O的合成与晶体结构

三羟甲基氨基甲烷与苦味酸(Pic)铜在乙醇水混合液中反应,制得少见的不对称氢键连接的超分子化合物{Cu[H2NC(CH2OH)3]2}{Pic}2?H2O。晶体属三斜晶系,空间群为P ,晶胞参数为a = 6.894(1),b = 8.219(1),c = 13.543(3) ? ?= 79.290(1),?= 8 3.36(2), ?= 84.590(1)埃轿狢20H30CuN8O22,V = 746.9(2) 3,Z = 1,Dc = 1.774 g/cm3,F(000) = 411,?= 0.844 mm-1,R = 0.0334,Rw = 0.0863。在配合物的结构单元中, Cu2+位于对称中心,分别与2个四齿配体(三羟甲基氨基甲烷)中的2个OH,1个NH2,三齿配位,呈笼状螯合。而另一个OH,因配体和中心离子构型的限制,不参与配位。     

流动注入吸附溶出—催化极谱氢波分析痕量铂

本文叙述一种流动注入吸附溶出一催化极谱测定痕量铂的新技术,它集中了溶出法、催化波和流动注入的优点,达到非常高的灵敏度和分析速度。实验给出了最佳载液组成、流速、注入体积、吸附富集电位和吸附时间等因素。本方法成功地进行了多种铂络合物、矿样和生物样品分析。     

A supported gold catalyst for the elimination of hydrogen from CO2 feed gas in the production of urea

Supported gold catalyst for eliminating hydrogen from CO₂ feed gas in the production of urea is found to be superior to other industrial catalysts (e.g. Pt/Al₂O₃ and PdPt/Al₂O₃) in catalytic activity and resistance to sulfur poisoning.     

(TiNi)_x(x=2~4)团簇结构和电子结构

从团簇角度对TiNi形状记忆合金进行了量子化学从头算研究。设计并优化了等原子比(TiNi)x(x=2~4)簇的多种可能几何结构,并对较稳定构型进行电子结构的分析。结果表明,等原子比的(TiNi)n团簇以TiNi成键为主要分子骨架,小团簇有较多能量接近的异构体,TiTi成键对能量降低有较大贡献。     

非晶态合金催化剂用于二甲基紫脲酸加氢反应

二甲基紫脲酸加氢反应;nicob/白炭黑催化剂;非晶态合金催化剂     

铝钛合金溴化物对直链烷烃异构化反应的催化作用

首次研究了铝铁合金溴化物的合成及其对直链烷烃异构化反应的催化作用,讨论了正戊烷的异构化反应,得到其动力学方程为1nC/C_0=-0.50t,表观活化能为26.3 kJ/moJ,测定了正己烷、正庚烷、正辛烷在不同溶剂中、不同温度下催化异构化反应的动力学曲线,为铝铁合金溴化物的工业应用提供了理论依据。     

Synthesis, X-ray crystal structures, and gas sorption properties of pillared square grid nets based on paddle-wheel motifs: implications for hydrogen storage in porous materials

A systematic modulation of organic ligands connecting dinuclear paddle-wheel motifs leads to a series of isomorphous metal-organic porous materials that have a three-dimensional connectivity and interconnected pores. Aromatic dicarboxylates such as 1,4-benzenedicarboxylate (1,4-bdc), tetramethylterephthalate (tmbdc), 1,4-naphthalenedicarboxylate (1,4-ndc), tetrafluoroterephthalate (tfbdc), or 2,6-naphthalenedicarboxylate (2,6-ndc) are linear linkers that form two-dimensional layers, and diamine ligands, 4-diazabicyclo[2.2.2]octane (dabco) or 4,4'-dipyridyl (bpy), coordinate at both sides of Zn(2) paddle-wheel units to bridge the layers vertically. The resulting open frameworks [Zn(2)(1,4-bdc)(2)(dabco)] (1), [Zn(2)(1,4-bdc)(tmbdc)(dabco)] (2), [Zn(2)(tmbdc)(2)(dabco)] (3), [Zn(2)(1,4-ndc)(2)(dabco)] (4), [Zn(2)(tfbdc)(2)(dabco)] (5), and [Zn(2)(tmbdc)(2)(bpy)] (8) possess varying size of pores and free apertures originating from the side groups of the 1,4-bdc derivatives. [Zn(2)(1,4-bdc)(2)(bpy)] (6) and [Zn(2)(2,6-ndc)(2)(bpy)] (7) have two- and threefold interpenetrating structures, respectively. The non-interpenetrating frameworks (1-5 and 8) possess surface areas in the range of 1450-2090 m(2)g(-1) and hydrogen sorption capacities of 1.7-2.1 wt % at 78 K and 1 atm. A detailed analysis of the sorption data in conjunction with structural similarities and differences concludes that porous materials with straight channels and large openings do not perform better than those with wavy channels and small openings in terms of hydrogen storage through physisorption.