High-throughput screening of fuel cell electrocatalysts

The drawbacks of our earlier report of preparing fuel cell catalyst arrays by borohydride reduction of inkjet prepared arrays of metal salts are discussed along with the need for inclusion of state-of-the-art metrics in all array screening. An alternative method for screening of hydrogen/air cathode catalysts, direct methanol fuel cell (DMFC) anode catalysts, and catalyst loading studies is provided. State-of-the-art Johnson Matthey catalysts were used in control experiments to demonstrate the utility of the array fuel cell for high throughput screening of fuel cell catalysts in the 3-4 mg/cm² range. This report lays out hard learned rules for high throughput screening and demonstrates that the array fuel cell can be used for very precise screening of libraries of membrane electrode assembly (MEA) components without the pitfalls discussed in the introduction.     

Comparison of growth stress measurements with modelling in thin iron oxide films

High temperature oxidation of metals leads to residual stresses both in the metal and in the growing oxide. In this work, the evolution of this residual stresses is theoretically predicted in the growing oxide layers. The origin of these stresses is based on a microstructural model. Using experimental results providing from the oxidation kinetics, and an analysis proposed to describe the growth strain occurring in the thin layers, a set of equations is established allowing determining the stresses evolution with oxidation time. Then, the model is compared with experimental results obtained on both α-Fe and phosphated α-Fe, oxidised at different temperatures. Numerical data are extracted from experiments either with an asymptotic formulation or with an inverse method. These two methods give good agreement with experiments and allow extracting the model parameters.     

Development of a Simulation Model for Solid Objects Suspended in a Fluctuating Fluid

We introduce a new scheme for the future application of Real-coded Lattice Gas (RLG) to the numerical simulation of suspended solid objects in a fluctuating fluid environment. The reproduction of Brownian motion for a single solid object is verified through the Gaussian distribution of its displacements. The effectiveness of the solid–solid interaction model is also confirmed in an N-body simulation.     

一种高信噪比的双光束激光光声光谱仪原理及应用

作为一种新兴的检测手段 ,激光光声光谱技术与其他检测技术相比具有很多优点。本文设计的光声光谱仪用激光做光源 ,有两个光声池 ,分别用来放置参考样品和待测样品 ,输出结果为二者光声信号的比值。利用这一比值 ,可以由参考样品的性能参数方便地求出待测样品的相关性能参数。该光声光谱仪有效地减小了本底吸收噪声的影响 ,提高了信噪比 ,扩大了固体光声理论的应用范围。本文还阐述了该光声光谱仪在定性定量分析中的一些应用     

Measurement of elastin hydrolysis by reverse-phase HPLC with on-line post-colum derivatization

Summary Excessive breakdown of elastin, a structural protein, may be related to aortic disease and emphysema. Since L-valyl-L-proline occurs in high concentrations in elastin, a rapid and sensitive method using HPLC with post-column on-line derivatization was used to measure the dipeptide from swine aortic tissue, and the amount of elastin present was determined. Elastin was extracted by alkaline hydrolysis. After neutralization and filtration, the sample was injected onto a ODS-2 gel column, and the dipeptide was eluted by a linear gradient of 0 to 10% of 1-propanol in 50 mM heptafluorobutyrate, pH 3, at a flow rate of 1 ml/min. The eluent was reacted with fluorescamine at pH 8.6, and fluorescence was detected at an excitation wavelength of 395 nm and a 455 nm cutoff emission filter.Presented at the 17th International Symposium on Chromatography, September 25–30, 1988, Vienna, Austria.     

高频聚焦换能器声场的激光测量法

本文描述了一种使用激光测振技术测量高频聚焦换能器声场布的方法，并给出了使用该方法对一种高频聚换能器进行测量的结果，通过理论计算对结果的正确性进行了验证。     

Characterization of a 4-miktoarm star copolymer of the (PS-b-PI)3 PS type by temperature gradient interaction chromatography

Temperature gradient interaction chromatography (TGIC) was applied for the separation of a complex miktoarm star copolymer which has one polystyrene (PS) arm and three polystyrene-b-polyisoprene (PS-b-PI) diblock copolymer arms. Such miktoarm star polymers are much more difficult to characterize than branched homopolymers since the byproduct, typically polymers with missing arm(s) or coupled products, have not only different molecular weights but also different compositions. TGIC was able to fully separate the byproducts, and the composition of the molecular species corresponding to the different separated elution peaks was determined by two methods, fractionation/NMR and multiple detection (UV and RI). A reasonable agreement between the results of the two methods was obtained. By using the composition found, the corresponding molecular weights were determined by multi-angle light scattering detection. Based on the composition and the molecular weight we were able to identify the structure of the different molecular species.     

毛细管气相色谱法测定中药中有机氯农药残留量

建立了江西省两种中药中有机氯农药残留量的气相色谱分析方法。样品以丙酮提取,在NaCl存在下,以正已烷进行液—液分配,提取液用H2SO4净化,采用DB—1701毛细管柱,GC—ECD检测有机氯农药残留量。最低检测限为1.0×10-3-5.0×10-3mg/kg,添加回收率为85.7%-115.2%,应用于实际样品中有机氯农药残留量的检测,获得了较为满意结果。     

热致型胆甾酯液晶的相变研究

使用偏光显微镜观察胆甾烯壬酸酯液晶的相变，发现在不同的温度变化条件下液晶相变过程是不同的．本文讨论了其变化规律．