MICRO-PHASE SAEPARATION IN EPOXY RESIN WATERBORNE PARTICLES DURING CURING PROCESS

Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature （Tg） and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.     

水中痕量钼(Ⅵ)的4-(2-吡啶偶氮)-间苯二酚螯合活性炭吸附富集分光光度法测定

提出了一种简单快速预富集水中痕量钼（Ⅵ）的新方法，方法的机理在于4－（2－吡啶偶氮）－间苯二酚（PAR）与钼（Ⅵ）螯合后被活性炭中附，然后用NaOH解吸下来，再用水杨基荧光酮与钼（Ⅵ）显色，分光光度法测定钼（Ⅵ）的含量；详细研究了影响Mo-PAR螯合物定量吸附于活性炭上的各种参数，找出了最佳吸附－解吸条件，包括吸附酸度、PAR用量、吸附时间、解吸酸度等；该法的主要优点是操作简单、快速，干扰小，避免了常规方法中用浓硝酸消化活性炭费时和污染大的解吸方法，该法已用于测定水中痕量钼（Ⅵ），加标回收率达到94％－97％。     

聚氧硫杂蒽树脂固化特性及其动力学的研究

以DSC、TG等技术手段研究了聚氧硫杂蒽树脂 (POSPF)的固化特性及其动力学 .结果表明 ,用六次甲基四胺 间二氯苄作固化剂 ,加热至 10 5～ 2 2 5℃能使POSPF树脂固化 ,在固化过程树脂中的活性羟甲基和固化剂参与反应生成亚甲基桥从而形成网状体型结构 ;动态DSC曲线上出现宽的固化放热峰 ,用T β外推法确定其凝胶温度Ti=10 0 0℃、固化温度Tp=181 5℃、后固化温度Tf=2 2 5 7℃ .固化后树脂具有优良的耐热性 ,失重 5 %时热分解温度高达 4 0 3℃ .     

甲醛-苯氧乙酸树脂对金属离子的交换性能研究

研究了甲醛-苯氧乙酸树脂对重金属离子铅、镉、汞的交换性能,并考察了温度、pH值、浓度等因素对交换性能的影响。结果表明,树脂对3种重金属离子的等温交换过程均符合Langmuir交换等温式,交换受液膜扩散控制;其交换容量可分别达1.85mmol/g、1.73mmol/g、1.13mmol/g。     

聚苯乙烯二乙醇胺树脂催化合成丙酸苄酯的研究

应用聚苯乙烯二乙醇胺树脂（PSDEA）催化苄氯与丙酸的酯化反应，合成了丙 酸苄酯。研究结果表明，聚苯乙烯二乙醇胺树脂具有较高的催化活性。考察了丙酸 ／苄氯摩尔比、催化剂用量和反应时间对酯产率的影响，在典型反应条件（丙酸： 苄氯摩尔比＝1．25：1，16．7gPSDEA／摩尔苄氯，80℃浴温，反应4．0h）下，所 得丙酸苄酯的产率为95．5％，该催化剂易于回收且可重复使用、具有良好的活性 稳定性。     

KINETIC MODELING OF ESTERIFICATION OF EPOXY RESIN IN THE PRESENCE OF TRIPHENYLPHOSPHINE FOR PRODUCING VINYL ESTER RESIN: MECHANISTIC RATE EQUATION

Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present study, bis-phenol A based epoxy resin and methacrylic acid was used to produce vinyl ester resin. The reaction was conducted under both stoichiometric and non-stoichiometric conditions in the presence of triphenylphosphine as catalyst. The stoichiometric and non-stoichiometric experiments were conducted at 95, 100, 105 and 110℃and at 90 and 95℃, respectively. The first order rate equation and mechanism based rate equation were examined. Parameters are evaluated by least square method. A comparison of mechanism based rate equation and experimental data show an excellent agreement. Finally, Arrhenius equation and activation energy were presented.     

丙烯酸Fe3+型树脂在非水介质中对鞣酸的配位吸附及洗脱性能

将Fe3 载于丙烯酸树脂上,制备了在非水介质中对鞣酸具有良好吸附性能的配位吸附树脂.在甲醇中,树脂对鞣酸的吸附符合Langmuir单分子层吸附模型,静态饱和吸附量为34mg/g,吸附为粒扩散控制过程.动态吸附中,树脂对鞣酸的泄漏吸附量为25mg/g,饱和吸附量32mg/g.采用5%的甲胺乙醇溶液作洗脱剂,洗脱率95%.树脂在吸附及洗脱过程中未见Fe3 脱落.     

大孔树脂对红霉素的吸附动力学研究

利用大孔吸附树脂Amberlite XAD16及HZ816对红霉素的吸附动力学实验,研究了温度、初始浓度、溶液pH值及搅拌速度等因素对吸附过程的影响.结果表明,Amberlite XAD16及HZ816对红霉素的吸附速率符合一级吸附动力学方程及颗粒内扩散方程,过程受液膜扩散阻力及颗粒内扩散阻力共同影响.同时,表观吸附速率常数与颗粒内扩散速率常数均随着温度的升高而增大,随着初始浓度的增大而增大,随着溶液pH值增大而增大,随着搅拌速度加快而增大.     

蒙旦树脂化学组成的研究

采用阴离子交换色谱和硅胶－氧化铝柱色谱对云南寻甸蒙旦树脂（ＸＤＳＺ）、潦浒蒙旦树脂（ＬＨＳＺ）、昭通蒙旦树脂（ＺＴＳＺ）和吉林舒兰蒙旦树脂（ＳＬＳＺ）进行了族组分的分离。树脂游离酸，树脂结合酸，树脂烃和树脂醇在各树脂中的百分含量分别为ＸＤＳＺ１１．８６，８．７６，１２．３０，４５．９９；ＬＨＳＺ１５．８９，１３．９１，４．９０，４５．９９；ＳＬＳＺ２５．４６，８．０７，１７．４０，３６．２２；ＺＴ     

Preparation and properties of sclerotium rolfsii invertase immobilized on indion 48-R

Crude extracellular invertase fromSclerotium rolfsii, when coupled to glutaraldehyde activated Indion 48-R, retained 70–80% activity of the soluble enzyme. Immobilization resulted in a decrease in the pH and temperature optima but it increased the temperature stability. K_m and V_max also increased as a result of immobilization. Both soluble and immobilized invertase showed inhibition at high substrate concentrations. The bound enzyme showed excellent stability to repeated use and retained approx 90% of its initial activity after 8 cycles of use.