La0.8Ca0.2MnO3纳米线的制备及表征

利用Sol-gel法结合氧化铝模板技术制备了La0.8Ca0.2MnO3纳米线, 并研究了两种热处理方法对 La0.8Ca0.2MnO3纳米线结构和形貌的影响. 快速升温到800 ℃得到的La0.8Ca0.2MnO3纳米线较粗, 其直径大于氧化铝模板的孔径, 而经过缓慢升温到400 ℃预处理再升温到800 ℃得到的La0.8Ca0.2MnO3纳米线, 其直径和氧化铝模板的孔径相当, 都约为35 nm. X射线衍射和透射电镜分析结果表明, 两种方法得到的 La0.8Ca0.2MnO3纳米线都是具有钙钛矿结构的属于单斜晶系的多晶材料.     

Rh/Al2O3上CO和NO的吸附性能及相互作用

利用ＴＰ－ＩＲ动态方法研究了ＣＯ和ＮＯ在Ｒｈ／Ａｌ２Ｏ３上吸附性能和相互作用的动态行为，结果表明，Ｒｈ／Ａｌ２Ｏ３的孪生中心对ＣＯ的吸附强于对ＮＯ的吸会，线式和桥式中心则对ＮＯ的吸附强于对ＣＯ的吸附，ＣＯ和ＮＯ共吸附－ＴＰ（ＣＯ和ＮＯ中）－ＩＲ动态过程结果揭示出２２２４ｃｍ＾－１谱带的出现和强度的增加与孪生ＣＯ谱带以及吸附的ＮＯ谱带的强度减弱同时发生，表明是由吸附的ＮＯ和孪生ＣＯ形成Ｒｈ－ＮＣＯ。     

Fe-Co-Ni合金纳米线有序阵列的模板合成与磁性

以二次阳极氧化的氧化铝膜为模板，用电化学沉积的方法成功地合成了Fe-Co-Ni三组份有序纳米线阵列.扫描电子显微镜（SEM）和透射电子显微镜(TEM)观察表明纳米线表面光滑、有序、高长径比；磁性测量表明,其矫顽力较同组份的膜材料有较大的提高.将样品在惰性气体氛围中不同温度下退火，随着退火温度增加，其纵向矫顽力有一个极值，而对应的横向矫顽力没有类似的变化，关于这一现象的机理,本文进行了初步的讨论. 图5参15     

Role of the solvent in thin-layer chromatography of steroids on alumina

The effects of different binary solvents on the retention behaviour of some steroids in thin-layer chromatography on alumina were studied. The slope of the linear relationship between the retention constant of the steroid and the logarithm of the volume fraction fo the polar component in the binary solvent mixture depends predominantly on the diluent. Linear relationships between the axis intercepts and slopes of particular steroids exists for all chromatographic systems examined. The slope of this relationships is a function of the retention constant of the steroid hydroxyl group.     

Renewable sol-gel carbon ceramic electrodes modified with a Ru-complex for the amperometric detection of l-cysteine and glutathione

A renewable three-dimensional chemically modified carbon ceramic electrode containing Ru [(tpy)(bpy)Cl] PF₆ was constructed by sol-gel technique. It exhibits an excellent electro-catalytic activity for oxidation of l-cysteine and glutathione at pH range 2-8. Cyclic voltammetry was employed to characterize the electrochemical behavior of the chemically modified electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for l-cysteine and glutathione by hydrodynamic amperometry. Optimum pH value for detection is 2 for both l-cysteine and glutathione. The catalytic rate constants for l-cysteine and glutathione were determined, which were about 2.1×10³ and 2.5×10³ M⁻¹ s⁻¹, respectively. Under the optimized condition the calibration curves are linear in the concentration range 5-685 and 5-700 μM for l-cysteine and glutathione determination, respectively. The detection limit (S/N=3) and sensitivity is 1 μM, 5 nA/μM for l-cysteine and 1 μM, 7.8 nA/μM for glutathione. The relative standard deviation (RSD) for the amperogram's currents with five injections of l-cysteine or glutathione at concentration range of linear calibration is <1.5%. The advantages of this amperometric detector are: high sensitivity, good catalytic effect, short response time (t<3 s), remarkable long-term stability, simplicity of preparation and reproducibility of surface fouling (RSD for six successive polishing is 3.31%). This sensor can be used as a chromatographic detector for analysis of l-cysteine and glutathione.     

催化裂化汽油中含硫化合物的分离氧化脱硫研究

以负载氧化铜的氧化铝层析柱对催化裂化(FCC)汽油全馏分进行分离,使其中的烷烃、烯烃与芳烃、含硫化合物分离成极性不同的两组,含硫化合物在芳烃组分中得以分离富集。分离后对芳烃组分中的含硫化合物进行氧化,脱硫率达72%。氧化后的芳烃组分与分离出来的烷烃、烯烃组分混兑,可使FCC汽油的总脱硫率达71·3%。     

First‐principles study of metal/nitride polar interfaces: Ti/TiN

We have examined the optimal interface structure, ideal work of adhesion and bonding character of polar Ti(110)/TiN(111) interfaces by first‐principles density‐functional plane‐wave pseudopotential calculations. Both Ti‐ and N‐terminated interfaces, including six different interface structures, were calculated. The interface structure for each termination, continuing the TiN crystal structure across the interface, has the largest work of adhesion. Although both terminations yield substantial adhesion energies in the range 3–7 J m^?2, the N‐terminated interface is ～4 J m^?2 stronger than the Ti‐terminated interface. Analysis of the interfacial electronic structure shows that the Ti‐terminated interface is a mixed strong, metallic and weak covalent character, whereas the N‐terminated interface is a polar covalent bond similar to the Ti/TiC interface. Further study of the separation of the optimal interface shows that the cleavages will never fracture at the interface due to the strong bonding, which is consistent with the experimental results. Copyright © 2003 John Wiley & Sons, Ltd.     

低温反应制备高纯度纳米BN包覆Al2O3和ZrO2粉体

硼酸和尿素在氮气中于650℃反应,生成t-BN-Al2O3和t-BN-ZrO2纳米包覆粉.IR分析表明,反应产物中含CH2和CN基团的杂质属尿素缩聚的复杂产物,经450℃煅烧即可除去.硼酸和尿素完全反应,得到纯净的纳米复合粉体.BN产率大于99%,在复合粉中的含量与计算值吻合.     

The thermal conductivity of alumina nanoparticles dispersed in ethylene glycol

The thermal conductivities of several nanofluids (dispersions of alumina nanoparticles in ethylene glycol) were measured at temperatures ranging from 298 to 411 K using a liquid metal transient hot wire apparatus. Our measurements span the widest range of temperatures that have been investigated to date for any nanofluid. A maximum in the thermal conductivity versus temperature behavior was observed at all mass fractions of nanoparticles, closely following the behavior of the base fluid (ethylene glycol). Our results confirm that additional temperature contributions inherent in Brownian motion models are not necessary to describe the temperature dependence of the thermal conductivity of nanofluids. Our results also show that the effect of mass or volume fraction of nanoparticles on the thermal conductivity of nanofluids can be correlated using the Hamilton and Crosser or Yu and Choi models with one adjustable parameter (the shape factor in the Hamilton and Crosser model, or the ordered liquid layer thickness in the Yu and Choi model).     

CePO_4/Ce-ZrO_2可加工陶瓷性能与断裂机制研究

以Ce ZrO2为基体,通过复合不同加入量的第二相CePO4颗粒,研究了陶瓷材料力学性能的变化,并借助加载能谱仪(EDS)的扫描电子显微镜(SEM)对材料弯曲断口及压痕裂纹扩展方式进行分析。当CePO4加入量为25%时,虽然材料力学性能有一定下降,但已经能用WC刀具进行加工。材料的弯曲断口显示,CePO4在两相体系中的断裂呈层片状形式;加入CePO4后,由于两相之间弱结合界面的存在,压痕裂纹扩展形式发生明显变化,由连续扩展机制过渡为不连续扩展。由这两种机制形成的材料断裂过程是阶段性的,在实际中可以用作材料最终破坏前的预报。