Radiation induced polymerization of vinyl monomers and their application for preparation of wood-polymer composites

Polymerizing effects of high energy radiation has been found suitable for preparation of wood-polymer composites. In the present work after evaluating polymer products that have been obtained by irradiation method, wood-polymer composites have been prepared by in situ polymerization of vinyl acetate, acrylic acid and acrylic acid/styrene mixture using two samples of Iranian hardwoods, Beech and Hornbeam. These woods and their composites have been tested for their physical and mechanical properties. The results have shown that chemical bonding between polymer and the cell wall component lead to better strength properties in the composites.     

Solid-State polymerization of the binary mixture of methacrylate and liquid-crystalline compound by electron beam

Solid-state polymerization of a binary mixture of nonliquid-crystalline monomer and liquidcrystalline compound was carried out using electron beam. The monomers were benzoic acid containing 4-[ω-(meth)acryloyloxyalkyloxy] benzoic acids, in which the alkylene spacer was ethylene, hexamethylene, or undecamethylene. The conversion yield of monomer to polymer to a large extent increased with increasing content of a liquid-crystalline compound with a terminal carboxylic group, such as 4-n-alkyloxybenzoic acid, while the addition of a liquid-crystalline compound without terminal carboxylic group did not affect polymerization of the monomer. Phase diagrams of the mixture of monomer and liquid-crystalline compound were examined using cross-polarizing microscopy and differential scanning calorimetry (DSC). All mixtures of monomer and 4-n-alkyloxybenzoic acid or liquid-crystalline compound without terminal carboxylic group showed liquid-crystallinity in a broad composition range. It was concluded that liquid-crystalline compounds with terminal carboxylic acid may form hydrogen bondings with methacrylate or acrylate monomer having terminal carboxylic acid which enhance polymerizability of the mixture. The stereoregularity of polymers determined by NMR depended on increasing irradiation dose and temperature rather than the content of the added liquid-crystalline 4-n-decanoxybenzoic acid.     

Preparation of Micron-size Functional Fluorescent Microspheres

As a kind of special functional microspheres, fluorescent polymer microspheres could be used in cell label and separation, blood flow assay, flow cytometer marking, chemical reaction assay,and in analyst of the transform and diffusion of particles in soil 1. However, one of the most important applications of fluorescent microspheres is in the high-throughput screening of drugs (HTS) 2. Through affinity interaction, radioactive ligands (latent drugs) are bound to fluorescent microspheres covered by receptor, and luminescence is produced by radioactivity, so ligands can be assayed and screened.In this study, we developed a technique for preparing micron-size fluorescent microspheres with different functional groups. The methods included the synthesis of micron-size polystyrene microspheres through the dispersion polymerization of styrene in different media such as ethanol,ethanol-water, and isopropanol; the functional polystyrene microspheres were prepared by introduction of functional monomers into the reaction system of styrene; the functional fluorescent microspheres were obtained by the way of dying functional microspheres in the fluorescent material's ethanol solvent.The average diameter of microspheres was in the range of 1～10 μm, and the distribution was normal distribution. The functional groups included -OH, -CHO, -COOH, -CONH2, and SO3H. The absorbing spectrum and exciting spectrum were tested, the results showed that the maximal absorbance of fluorescent microsphere was near 306.5 nm, and its maximal excitation was near 362 nm. The excitation spectrum of fluorescent material (DPO) and fluorescent microspheres were shown in figure 1, and it indicated that the developed fluorescent microspheres showed the same excitation behavior like DPO, which related to the fluorescent microspheres had stable luminescence property.     

负载咖啡因-活性炭新吸附材料对钼(VI)的吸附行为的研究

以生物碱（咖啡因）为衍生化试剂，用浸渍法使其负载于活性炭（ＡＣ）上，制成一种新的金属阴离子吸附材料———负载咖啡因－活性炭（ＣＡＣ）。用ＩＣＰ－ＡＥＳ研究了该吸附材料对金属阴离子［Ｍｏ７Ｏ２４］６－的吸附性能；考察了其化学稳定性；还研究了不同浓度硫酸和氨水对待测物吸附率和解脱率的影响及共存离子的干扰影响。     

烯烃氢甲酰化催化剂活性物种的原位~1H NMR研究

有机磷配位铐或钴联基配合物是生产难或醇的工业催化剂，一般公认金属氢化物是反应的催化活性物种．通常反应活性物种仅存在干反应状态下，其结构表征非常困难，在许多研究中只能关联催化剂母体与其活性的关系［‘1；而未能揭示出催化的本质，给催化剂设计造成很大困难，因而对催化剂活性物种的直接表征受到普遍关注．B。wn问、Morrista］及本文作者研究组＊均采用加压原位红外光谱方法，在烯烃氢甲酸化反应条件下捕捉到HCO（CO）3L存在的信息·但用相同方法在反应条件下，在RhH键特征吸收谱带195O－2200Cm‘内未观测到错氢化物的Rh－…     

Synthesis and cationic photopolymerization of electroactive monomers containing functional groups

The synthesis and cationic photopolymerization of different cationically polymerizable monomers containing electroactive groups are reviewed with 98 references. The preparation of various compounds containing electron‐donor or electron‐acceptor moieties and photopolymerizable functional groups is described. After a short discussion of basic principles of cationic polymerization, photoinduced cationic polymerizations of various cationically polymerizable monomers containing both electron‐donor or electron‐acceptor chromophores and the functional groups such as epoxy, vinyl, thiiranyl, oxetanyl and others are reviewed. Copyright © 2005 John Wiley & Sons, Ltd.     

Perfluorinated polymer surfaces comprising SF5-terminated long-chain perfluoroacrylate

A new perfluorinated acrylate monomer containing the SF₅(CF₂)₆-perfluorinated side chain was synthesized and polymerized into films. Bulk monomer characterization is consistent with the molecular structure based on FTIR, mass spectrometry and NMR analyses. The surface properties of polymer coatings were studied with aqueous wetting (contact angle) and X-ray photoelectron spectroscopy (XPS) methods. The surface composition is shown to be highly enriched in the terminal side chain SF₅-chemistry and exhibits properties consistent with a highly apolar, non-wetting perfluorinated polymer surface. Depth-dependent XPS studies using angular-resolved methods (ADXPS) confirmed a non-stoichiometric enrichment of sulfur and fluorine at the film ambient interface, consistent with a surface presence of the terminal SF₅-group and possibly film structural anisotropy in the surface zone. Time-of-flight (TOF) secondary ion mass spectrometry (SIMS) analysis supplements the XPS data by showing the presence of all expected SF₅-acrylate chemistry components in the outer 15 Å of the film surface.     

PABA疏水缔合水溶性共聚物溶液的合成与性能研究

本文根据高分子的分子设计原理，合成了带苯基的疏水单体N－苯基对正丁基丙烯酰胺（BBAM）。采用自由基胶束共聚的方法制备了水溶性丙烯胺／N－苯基对正丁基丙烯酰胺（BBAM）疏水缔合型共聚物（PABA）。研究了共聚物溶液的性能及影响因素。结果表明，随共聚物溶液浓度的增加，在临界缔合浓度以上，分子间缔合大量形成，水溶液表现粘度迅速增加，表现出明显的疏水缔合行为，与HPAM相比有优异的抗盐性。     

Synthesis and polymerization of N-[N′-(α-methylbenzyl)aminocarbonyl-n-alkyl]maleimide

Two types of optically active N-[N′-(α-methylbenzyl)amino/carbonyl-n-alkyl]maleimides (MBAC) were synthesized from maleic anhydride, 6-amino-n-caproic acid (or 12-amino-n-dodecanoic acid), and (R)-(+)-α-methylbenzylamine. Radical homopolymerizations of MBAC were performed in several solvents at 60 and 110°C for 24 h to give optically active polymers. Radical copolymerizations of MBAC were performed with styrene (ST) and methyl methacrylate (MMA) in dioxane at 60°C. The monomer reactivity ratios and the Alfrey-Price Q-e values were determined. Chiroptical properties of the polymers and copolymers were investigated. © 1995 John Wiley & Sons, Inc.     

Controlled synthesis of poly(acetone oxime acrylate) as a new reactive polymer: Stimuli-responsive reactive copolymers

Acetone oxime acrylate has been synthesized as a new active ester monomer. Free radical polymerization yielded a reactive polymer soluble in various organic solvents, such as chloroform, dioxane, DMSO, acetone, methanol, dichloromethane, DMF, and ethanol. Controlled radical polymerization of acetone oxime acrylate was successfully conducted using the RAFT, NMP and Iniferter method. Partly polymer analogous reaction with N-isopropylamine resulted in the reactive copolymer poly(N-isopropylacrylamide-co-acetone oxime acrylate), which featured a lower critical solution temperature (LCST) of 61 °C in water. Further, the reactivity of the copolymer was exemplary proven by complete reaction with ammonia yielding poly(N-isopropylacrylamide-co-acrylamide), which does not possess a LCST.