Frontal polymerization synthesis and characterization of temperature- and pH-sensitive hydrogels

The temperature- and pH-sensitive hydrogels, poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AAc)), were synthesized via frontal polymerization (FP). The reaction components have been varied in order to find their influences on frontal parameters and copolymer features. The results showed that front velocity and front temperature were dependent on the initiator concentration, reactant dilution, and NIPMA/AAc molar ratio. In addition, the morphology and sensitive behavior of the FP hydrogels were mainly affected by monomers’ ratio. Namely, the pore size, swelling abilities, LCST, and response kinetics of copolymer hydrogels obviously increased with the increasing acrylic acid concentration; however, they slightly changed with varying of amounts of initiator and solvent. Finally, in comparison with the hydrogels prepared by conventional batch polymerization, the ones synthesized by frontal polymerization exhibited more homogeneous chain composition and improved microstructure and response ability.     

Adsorption of poly(N-isopropylacrylamide-co-4-vinylpyridine) onto core-shell poly(styrene-co-methylacrylic acid) microspheres

Adsorption of the thermoresponsive copolymer of poly(N-isopropylacrylamide-co-4-vinylpyridine) (PNIPAM-co-P4VP) onto the core-shell microspheres of poly(styrene-co-methylacrylic acid) (PS-co-PMAA) is studied. The core-shell PS-co-PMAA microspheres are synthesized by one-stage soap-free polymerization in water. The copolymer of PNIPAM-co-P4VP is synthesized by free radical polymerization of N-isopropylacrylamide and 4-vinylpyridine in the mixture of DMF and water using K₂S₂O₈ as initiator. Adsorption of PNIPAM-co-P4VP onto the core-shell PS-co-PMAA microspheres results in formation of the composite microspheres of PS/PMAA-P4VP/PNIPAM. The driven force to adsorb the copolymer of P4VP-co-PNIPAM onto the core-shell PS-co-PMAA microspheres is ascribed to hydrogen-bonding and electrostatic affinity between the P4VP and PMAA segments. The resultant composite microspheres of PS/PMAA-P4VP/PNIPAM with surface chains of PNIPAM are thermoresponsive in water and show a cloud-point temperature at about 33 °C.     

Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] thermoresponsive microspheres: An accurate method based on solute exclusion technique to determine the volume phase transition temperature

Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] [poly(NIPAAm-co-AAm-co-HEMA)] copolymer was synthesized as a new thermoresponsive material possessing a lower critical solution temperature (LCST) around 37 °C in phosphate buffer, pH 7.4, at a solution concentration of 1%, w/v. The influence of polymer concentration on LCST was determined by cloud point measurements and by microcalorimetric analysis. The copolymer was transformed in hydrogel microspheres by suspension reticulation of OH groups with glutaraldehyde. The volume phase transition temperature (VPTT) of microspheres was determined by a new approach, which involves measurement of the increase in concentration of a blue dextran (BD) solution at different temperatures in the presence of dry microspheres. The minimum BD concentration that gives reliable and reproducible results was determined to be 1 mg/ml. However, the higher is the concentration of BD in solution the smaller is the error. Contrary to solution of the linear polymer which displays a sharp phase transition temperature, the dependence of water regain of the hydrogel with temperature lasts from 4 °C to 50 °C.     

Preparation of thermo-responsive polymer brushes on hydrophilic polymeric beads by surface-initiated atom transfer radical polymerization for a highly resolutive separation of peptides

Poly(N-isopropylacrylamide-co-N-tert-butylacrylamide) [P(IPAAm-co-tBAAm)] brushes were prepared on poly(hydroxy methacrylate) (PHMA) [hydrolyzed poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate)] beads having large pores by surface-initiated atom transfer radical polymerization (ATRP) and applied to the stationary phases of thermo-responsive chromatography. Optimized amount of copolymer brushes grafted PHMA beads were able to separate peptides and proteins with narrow peaks and a high resolution. The beads were found to have a specific surface area of 43.0 m²/g by nitrogen gas adsorption method. Copolymer brush of P(IPAAm-co-tBAAm) grafted PHMA beads improved the stationary phase of thermo-responsive chromatography for the all-aqueous separation of peptides and proteins.     

Preparation of biodegradable and thermoresponsive enzyme–polymer conjugates with controllable bioactivity via RAFT polymerization

The preparation of biodegradable and thermoresponsive enzyme–polymer bioconjugates with controllable enzymatic activity via reversible addition−fragmentation chain transfer (RAFT) polymerization and amidation conjugation reaction is presented. A new 2-mercaptothiazoline ester functionalized RAFT agent with intra-disulfide linkage was synthesized and used as chain transfer agent (CTA) to generate a biocompatible homopolymer, poly(ethyleneglycol) acrylate (polyPEG-A) and a thermoresponsive copolymer of poly(ethyleneglycol) acrylate with di(ethyleneglycol)ethyl ether acrylate [poly(PEG-A-co-DEG-A)]. These biodegradable and thermoresponsive polymers were then conjugated to the surface of glucose oxidase (GOx) under mild condition to afford the biodegradable and thermoresponsive enzyme–polymer conjugates. Cleavage of the polymer chains from the GOx surface obviously recovered the enzymatic activity. The thermoresponsive test of GOx-poly(PEG-A-co-DEG-A) revealed that the bioconjugate exhibited regular enzymatic activity fluctuation upon the temperature change below or above the lower critical solution temperature (LCST). The as-prepared enzyme–polymer conjugates were also characterized using ¹H NMR, UV–vis spectroscopy, polyacrylamide gel electrophoresis (PAGE) and biocatalytic activity tests. These smart enzyme–polymer conjugates would envision promising applications in biotechnology and biomedicine.     

A chemo-mechanical switchable valve on microfluidic chip based on a thermally responsive block copolymer

Microfluidic devices have become a powerful tool for chemical and biologic applications. To control different functional parts on the microchip, valve plays a key role in the device. In conventional methods,physio-mechanical valves are usually used on microfluidic chip. Herein, we reported a chemo-mechanical switchable valve on microfluidic chip by using a thermally responsive block copolymer. The wettability changes of capillary with copolymer modification on inner surface were investigated to ...     

Synthesis of poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)] with a reactive group at the poly(ethylene glycol) end and its thermosensitive self‐assembling character

Poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)]s with a reactive group at the poly(ethylene glycol) (PEG) end were synthesized by the radical copolymerization of N‐isopropylacrylamide with a PEG macromonomer having an acetal group at one end and a methacryloyl group at the other chain end. The temperature dependence of the aqueous solutions of the obtained graft copolymers was estimated by light scattering measurements. The intensity of the light scattering from aqueous polymer solutions increased with increasing temperature. In particular, at temperatures above 40°C, the intensity abruptly increased, indicating a phase separation of the graft copolymer due to the lower critical solution temperature (LCST) of the poly(N‐isopropylacrylamide) segment. No turbidity was observed even above the LCST, and this suggested a nanoscale self‐assembling structure of the graft copolymer. The dynamic light scattering measurements confirmed that the size of the aggregate was in the range of several tens of nanometers. The acetal group at the end of the PEG graft chain was easily converted to the aldehyde group by an acid treatment, which was analyzed by ¹H NMR. Such a temperature‐induced nanosphere possessing reactive PEG tethered chains on the surface is promising for new nanobased biomedical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1457–1469, 2006     

Temperature-responsive photoluminescence of quinoline-labeled poly(N-isopropylacrylamide) in aqueous solution

The pH- and temperature-responsive optical properties of a quinoline-labeled poly(N-isopropylacrylamide) copolymer are explored in aqueous solution and compared to the respective behavior of a similar quinoline-labeled poly(N,N-dimethylacrylamide) copolymer. These copolymers, P(NIPAM-co-SDPQ) and P(DMAM-co-SDPQ), were prepared through free radical copolymerization of 2,4-diphenyl-6-(4-vinylphenyl)quinoline (SDPQ) with the thermosensitive N-isopropylacrylamide (NIPAM) and the hydrophilic N,N-dimethylacrylamide (DMAM), respectively. Both copolymers exhibit the well-known pH-controlled optical response of quinoline unit in aqueous solution and the emitted color changes from blue to green upon decreasing pH. Nevertheless, a ～20 nm emission shift is observed upon heating the aqueous P(NIPAM-co-SDPQ) solution, regardless of pH, due to the formation of hydrophobic microdomains (Nile Red probing), as a consequence of the Lower Critical Solution Temperature (LCST) behavior of this copolymer in water. Interestingly, this LCST behavior also imposes the partial deprotonation of the otherwise protonated SDPQ unit at pH = 2 and the emission of the basic form appears upon increasing temperature, suggesting that the acid/base equilibrium of the quinoline unit is significantly temperature-controlled, when introduced in the thermosensitive poly(N-isopropylacrylamide) chain.     

Poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) Modification via Organocatalyzed Atom Transfer Radical Polymerization

To address the challenge of metal contamination, a “graft from” approach via organocatalyzed atom transfer radical polymerization (O‐ATRP) is developed to synthesize poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) (P(VDF‐co‐CTFE)) graft copolymers. N‐phenylphenothiazine is utilized as a model organic photoredox catalyst for catalyzing the (co)polymerization of methyl methacrylate (MMA), methacrylate (MA), and n‐butyl acrylate (BA). By employing this technique, high temporal control of polymerization and graft content are achieved. A series of P(VDF‐co‐CTFE)‐g‐PMMA, P(VDF‐co‐CTFE)‐g‐PMA, and P(VDF‐co‐CTFE)‐g‐PBA is prepared under mild conditions. The resultant graft copolymer can be used as macroinitiator to re‐initiate O‐ATRP to synthesize P(VDF‐co‐CTFE)‐g‐(PMMA‐b‐PMA), which might exhibit the potential application as novel dielectric material.     

Thermosensitive and control release behavior of poly(N-isopropylacrylamide-co-acrylic acid)/nano-Fe3O4 magnetic composite latex particle that is synthesized by a novel method

In this study, a novel method was used to synthesize the poly(N-isopropylacrylamide-co-acrylic acid)/Fe₃O₄ (poly(NIPAAm-AA)/Fe₃O₄) magnetic composite latex. The crosslinked poly(NIPAAm-AA) polymer latex particles were first synthesized by the method of soapless emulsion polymerization, then Fe²⁺ and Fe³⁺ ions were introduced to bond with the -COOH groups of AA segments in poly(NIPAAm-AA) polymer latex particles. Further by a reaction with NH₄OH, Fe₃O₄ nanoparticles were generated in situ. The concentrations of acrylic acid (AA), crosslinking agent (N,N′-methylene bisacrylamide (MBA)), and Fe₃O₄ nanoparticles were important factors to influence the morphology and lower critical solution temperature (LCST) of poly(NIPAAm-AA)/Fe₃O₄ magnetic composite latex particles. The poly(NIPAAm-AA)/Fe₃O₄ latex particles were used as a thermosensitive drug carrier to load caffeine. The control release of caffeine was studies. Morphology-based schematic models were proposed to explain the control release behavior of the composite particles with different compositions. Moreover, the protein (albumin, acetylated from bovine serum (BSA)) was bound on the surface of poly(NIPAAm-AA)/Fe₃O₄ composite latex particles. The effects of AA, crosslinking agent and Fe₃O₄ contents on the amount of BSA binding were investigated at different temperatures and pH values. The composition-morphology-BSA conjugation relationship was established.     

The glucose‐responsive behavior of a block copolymer featuring boronic acid and glycine

Glucose responsive block copolymer featuring boronic acid as a glucose responsive moiety and glycine are reported. The first block is polymerized through reversible addition–fragmentation chain transfer (RAFT) polymerization and the resulting poly(N‐acryloylmorpholine)₁₁₃ (PAcM) is employed as a macro‐chain transfer agent for chain extension with pentafluorophenyl acrylate (PFPA) yielding a well‐defined PAcM₁₁₃‐block‐poly(pentafluorophenyl acrylate)₈₄ (PPFPA). The PPFPA block is then reacted with functional (3‐aminomethyl) phenyl boronic acid and glycine via post‐polymerization modification and the structure of the block copolymer is confirmed by proton nuclear magnetic resonance (NMR), ¹⁹F NMR, Fourier transform infrared, and gel permeation chromatography. By copolymerizing glycine into the polymer backbone, the relative pK_a of the block copolymer is significantly lowered. The block copolymer can self‐assemble into core–shell micelles in aqueous solution and disassemble in response to glucose at the physiological pH. Furthermore, the encapsulation and release of Nile red (NR) as a hydrophobic model drug is studied under the physiological pH. The influence of the glucose concentration on the NR release from the polymeric micelles is demonstrated. These results suggested that the glucose‐responsive poly[(AcM)₁₁₃‐b‐(3‐(aminomethyl)phenylboronic acid hydrochloride(‐co‐Gly)₈₄] block copolymer has potential applications as a glucose‐responsive polymer for insulin delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 422–431     

Synthesis of Thermo‐Responsive Polymers With Both Tunable UCST and LCST

New water‐soluble block copolymers of 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA), oligo(ethylene glycol) methacrylate (OEGMA), and N‐(3‐(dimethylamino) propyl) methacrylamide (DMAPMA) (poly(OEGMA‐co‐MEO₂MA)‐b‐poly(DMAPMA)) were prepared via sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization. Selective quaternization of poly(DMAPMA) block gives poly(OEGMA‐co‐MEO₂MA)‐b‐poly((3‐[N‐(3‐methacrylamidopropyl)‐N,N‐dimethyl]ammoniopropane sulfonate)‐co‐N‐(3‐(dimethylamino) propyl) methacrylamide), such block copolymer exhibits double thermo‐responsive behavior in water, poly(MEO₂MA‐co‐OEGMA) block shows a lower critical solution temperature (LCST), and poly((3‐[N‐(3‐methacrylamidopropyl)‐N,N‐dimethyl]ammoniopropane sulfonate)‐co‐N‐(3‐(dimethylamino) propyl) methacrylamide) block shows a upper critical solution temperature (UCST). Both of LCST and UCST can be controlled: LCST could be tuned by the fraction of OEGMA units in poly(OEGMA‐co‐MEO₂MA), and UCST was found to be dependent on the degree of quaternization (DQ).

     

Thermo‐ and pH‐responsive gradient and block copolymers based on 2‐(2‐methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces

A series of gradient and block copolymers, based on 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and tert‐butyl acrylate (^tBA), were synthesized by atom transfer radical polymerization (ATRP) in a first step. The MEO₂MA monomer leads to the production of thermosensitive polymers, exhibiting lower critical solution temperature (LCST) at around room temperature, which could be adjusted by changing the proportion of ^tBA in the copolymer. In a second step, the tert‐butyl groups of ^tBA were hydrolyzed with trifluoroacetic acid to form the corresponding block and gradient copolymers of MEO₂MA and acrylic acid (AA), which exhibited both temperature and pH‐responsive behavior. These copolymers showed LCST values strongly dependent on the pH. At acid pH, a slightly decrease of LCST with an increase of AA in the copolymer was observed. However, at neutral or basic conditions, ionization of acid groups increases the hydrophilic balance considerably raising the LCST values, which even become not observable over the temperature range under study. In the last step, these carboxylic functionalized copolymers were covalently bound to biocompatible and biodegradable films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(HB‐co‐HHx)] obtained by casting and, previously treated with ethylenediamine (ED) to render their surfaces with amino groups. Thereby, thermosensitive surfaces of modified P(HB‐co‐HHx) could be obtained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Optically active core/shell nanoparticles prepared using self‐assembled polymer micelle as reactive nanoreactor

This article reports on optically active core/shell nanoparticles constituted by chiral helical polymers and prepared by a novel approach: using self‐assembled polymer micelles as reactive nanoreactors. Such core/shell nanoparticles were composed of optically active helical‐substituted polyacetylene as the core and thermosensitive poly(N‐isopropylacrylamide) as the shell. The synthetic procedure is divided into three major steps: (1) synthesis of amphiphilic diblock copolymer bearing polymerizable C[tbond]C bonds via atom transfer radical polymerization, followed by (2) self‐assembly of the diblock copolymer to form polymer micelles; and (3) catalytic emulsion polymerization of substituted acetylene monomer conducted using the polymer micelles as reactive nanoreactors leading to the core/shell nanoparticles. The core/shell nanoparticles simultaneously exhibited remarkable optical activity and thermosensitivity. The facile, versatile synthesis methodology opens new approach toward preparing novel multifunctional core/shell nanoparticles.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Latent solid‐phase extraction with thermoresponsive soluble polymers

The use of soluble thermoresponsive polymers to sequester or scavenge hydrophobic guest molecules from dilute aqueous solutions on heating is described. In these studies, a homopolymer of N‐isopropylacrylamide was shown to sequester 46–83% of a soluble monochlorotriazine from 0.1–10 ppm aqueous solutions when heating above this polymer's lower critical solution temperature (LCST). Substitution of the reactive piperidine‐containing 20:1 copolymer poly(N‐isopropylacrylamide)‐c‐poly[N‐4‐(acrylamidomethyl)piperidine] for this unreactive polymer led to >98% scavenging of these same triazines when heating above this reactive polymer's LCST. The monochlorotriazine guests studied included the herbicide atrazine and two dye‐labeled analogues of this herbicide. In one case, an atrazine analogue was designed so as to contain a dansyl group for fluorescence analysis. In the second case, an atrazine analogue was labeled with a methyl red group to facilitate visual and spectrophotometric analysis. Atrazine concentrations were measured with liquid chromatography–mass spectrometry. The enhanced efficiency of the reactive piperidine‐containing copolymer scavenger in removing triazines from solution is attributed to covalent bond formation by nucleophilic aromatic substitution of the chlorine of the monochlorotriazines by the piperidine nucleophile on the copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6309–6317, 2004     

Revisiting the thermosensitivity of poly(acrylamide-co-diacetone acrylamide)

The lower critical solution temperature （LCST） behavior of poly（acrylamide-co-diacetone acrylamide） （poly（AM-co-DAM）） copolymer in aqueous solutions was studied. The results demonstrate the LCST linearly decreases as the molar fraction of DAM （fDAM） increases. In the range of fDAM 〈 0.36, the transmittance increases as fDAM decreases because the more hydrophilic copolymer chains can form looser aggregates with a lower refractive index. The transmittance exhibits a minimum when fDAM is less than 0.28 as the chains form micelle-like structure with a size smaller than the wavelength. The LCST decreases with the initial polymer concentration, but it levels off when the polymer concentration is high enough. Moreover, no hysteresis can be observed in the change of transmittance during the heating-cooling process because no additional hydrogen bonds are formed in the collapsed state due to the steric hindrance of the large side groups in DAM units.     

Nonlinear depression of the lower critical solution temperatures in aqueous solutions of thermo-sensitive random copolymers

We develop a theoretical model of cooperative hydration to clarify the molecular origin of the observed nonlinear depression of the lower critical solution temperature (LCST) in the aqueous solutions of thermosensitive random copolymers and find the monomer composition at which LCST shows a minimum. Phase diagrams of poly(N-isopropylacrylamide-co-N,N-diethylacrylamide) copolymer solutions are theoretically derived on the basis of the theory of cooperative hydration by introducing the microscopic structure parameter η which characterizes the distribution of the monomer sequences along the chains. We compared them with the experimental data of LCST of random copolymers with various monomer compositions and also of the diblock copolymers with equimolar monomer composition. The transition temperature shifts to lower than those of homopolymer counterparts when the monomer sequence of the chains has an alternative tendency. On the contrary, for the blocky polymers such as diblock copolymers, the transition temperature remains almost the same as those of the homopolymers. Thus, the nonlinear effect in phase separation appears when the average block length of the copolymers is shorter than the average sequence length of the cooperative hydration. The degree of hydration is calculated as a function of the temperature and polymer concentration for varied distribution of the copolymer compositions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1112–1123     

Influence of crosslinker and ionic comonomer concentration on glass transition and demixing/mixing transition of copolymers poly(N-isopropylacrylamide) and poly(sodium acrylate) hydrogels

Hydrogels based on N-isopropylacrylamide and sodium acrylate as ionic comonomer were synthesized by free radical polymerization in water using N,N′-methylenebisacrylamide as crosslinker and ammonium persulfate as initiator. The glass transition of dried copolymers poly(N-isopropylacrylamide) (PNIPA) and poly(sodium acrylate) (SA) gels and demixing/mixing transition of PNIPA-SA hydrogels swollen with increasing amounts of water were studied using conventional differential scanning calorimetry. In the crosslinked polymers, the glass transition linearly increases, and the transition range becomes broader, with increasing crosslinker content. Increasing content of ionic comonomer also produces an increase of glass transition temperature, which moves to higher temperatures with higher sodium acrylate fraction. The influence of chemical structure of PNIPA-SA hydrogels on the lower critical solution temperature (LCST) of PNIPA-SA/water mixtures during heating and cooling was quantified as function of the content of the crosslinker and the ionic comonomer, as well as water content of the hydrogel in the range from 95 to 70 wt%. At parity of water content, the LCST occurs at higher temperatures for gels containing higher amounts of sodium acrylate. Similarly, the introduction of N,N′-methylenebisacrylamide causes an increase of the LCST, which grows with increasing of crosslinking degree of the hydrogel.     

Preparation and characterization of a thermoresponsive gigaporous medium for high-speed protein chromatography

A high-speed thermoresponsive medium was developed by grafting poly(N-isopropylacrylamide-co-butyl methacrylate) (P(NIPAM-co-BMA)) brushes onto gigaporous polystyrene (PS) microspheres via surface-initiated atom transfer radical polymerization (ATRP) technique, which has strong mechanical strength, good chemical stability and high mass transfer rate for biomacromolecules. The gigaporous structure, surface chemical composition, static protein adsorption, and thermoresponsive chromatographic properties of prepared medium (PS–P(NIPAM-co-BMA)) were characterized in detail. Results showed that the PS microspheres were successfully grafted with P(NIPAM-co-BMA) brushes and that the gigaporous structure was robustly maintained. After grafting, the nonspecific adsorption of proteins on PS microspheres was greatly reduced. A column packed with PS–P(NIPAM-co-BMA) exhibited low backpressure and significant thermo-responsibility. By simply changing the column temperature, it was able to separate three model proteins at the mobile phase velocity up to 2167 cm h⁻¹. In conclusion, the thermoresponsive polymer brushes grafted gigaporous PS microspheres prepared by ATRP are very promising in ‘green’ high-speed preparative protein chromatography.     

Facile synthesis of triple‐stimuli (photo/pH/thermo) responsive copolymers of 2‐diazo‐1,2‐naphthoquinone‐mediated poly(N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide)

A series of poly(N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide) P(NIPAM‐co‐NHMA) copolymers were firstly synthesized via free radical polymerization. Then, the hydrophobic, photosensitive 2‐diazo‐1,2‐naphthoquinone (DNQ) molecules were partially and randomly grafted onto P(NIPAM‐co‐NHMA) backbone through esterification to obtain a triple‐stimuli (photo/pH/thermo) responsive copolymers of P(NIPAM‐co‐NHMA‐co‐DNQMA). UV‐vis spectra showed that the lower critical solution temperature (LCST) of P(NIPAM‐co‐NHMA) ascended with increasing hydrophilic comonomer NHMA molar fraction and can be tailored by pH variation as well. The LCST of the P(NIPAM‐co‐NHMA) went down firstly after DNQ modification and subsequently shifted to higher value after UV irradiation. Meanwhile, the phase transition profile of P(NIPAM‐co‐NHMA‐co‐DNQMA) could be triggered by pH and UV light as expected. Thus, a triple‐stimuli responsive copolymer whose solution properties could be, respectively, modulated by temperature, light, and pH, has been achieved. These stimuli‐responsive properties should be very important for controlled release delivery system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2763–2773, 2009