水溶性疏水缔合型聚(丙烯酰胺-丙烯酸十六酯)溶液性质的研究

采用沉淀聚合法制备水溶性的丙烯酰胺－丙烯酸十六疏水缔合型共聚物,研究了共聚物水溶液的性质及其影响因素。随着疏水基团含量增加,共聚物在纯水中及NaCl溶液中的特性粘数[η]均减小,疏水基团临界缔合浓度降低。共聚物溶液浓度高于监界缔合浓度时,溶液表现粘度急剧增加,表明溶液中分子间缔合大量形成。     

聚(丙烯酰胺-丙烯酸高级酯)的溶液性质研究

采用沉淀聚合法分别合成了丙烯酰胺与丙烯酸十四酯、丙烯酸十六酯、丙烯酸十八酯一系列疏水缔合型共聚物。对共聚物溶液性质及疏水基团浓度、电解质浓度、温度等因素对共聚物溶液性能的影响进行了研究,结果表明这类疏水缔合型聚合物表观出较好的耐温、耐盐等性能。     

改性聚丙烯酰胺水溶液的疏水缔合性质

合成了一种疏水缔合水溶性聚丙烯酰胺共聚物,使用荧光光谱法并结合紫外及流变性实验,对制备的疏水缔合水溶性聚丙烯酰胺共聚物在水溶液中形成疏水微区、超分子聚集体及空间网络结构进行了研究,并用扫描电子显微镜证实了溶液中网络结构的存在.     

新一族疏水缔合聚丙烯酰胺NaAMC14S/AM与Gemini表面活性剂之间的相互作用

在水溶液中进行了表面活性单体丙烯酰胺基十四烷基磺酸钠(NaAMC14S)与丙烯酰胺(AM)的均相共聚合, 制备了具有微嵌段结构的疏水缔合聚丙烯酰胺NaAMC14S/AM, 合成了阳离子型Gemini表面活性剂二溴化-N,N′-二(二甲基十二烷基)己二铵(C12C6C12Br2), 采用表观粘度法和荧光探针法研究了共聚物NaAMC14S/AM与Gemini表面活性剂C12C6C12Br2的相互作用. 研究结果表明, 疏水缔合聚丙烯酰胺NaAMC14S/AM与Gemini表面活性剂C12C6C12Br2之间存在着很强的相互作用, 既存在静电相互作用, 又存在强烈的疏水相互作用, 表现在以下几方面: C12C6C12Br2的加入, 使共聚物NaAMC14S/AM在浓度小于其临界缔合浓度(cac)时即发生分子间的缔合; C12C6C12Br2在低于其临界胶束浓度时, 就与共聚物NaAMC14S/AM形成混合胶束; 当共聚物的浓度为0.30%(w)时, 随着C12C6C12Br2加入量的增多, 共聚物水溶液的粘度会发生大幅度的增加, 在最大值处粘度竟提高了3个数量级. 研究还发现, 共聚物NaAMC14S/AM与C12C6C12Br2之间的相互作用还与共聚物分子链中的疏水微嵌段含量有关, 疏水微嵌段含量越多, NaAMC14S/AM与C12C6C12Br2之间的相互作用越强, 溶液粘度增加的程度越大.     

疏水基改性聚丙烯酰胺的合成及溶液性质

利用自由基胶束聚合法,由丙烯酰胺和甲基丙烯酸十八酯共聚合成了疏水缔合型水溶性聚合物.通过红外光谱表征了共聚物的结构,考察了共聚物浓度、盐浓度、剪切速率以及温度对共聚物溶液性能的影响.试验结果表明,聚合物质量分数大于临界缔合浓度(2%)时,溶液的粘度急剧增大;疏水缔合聚合物溶液的表观粘度随着溶液中NaCl质量分数的增加而增大.     

表面活性单体NaAMC_(14)S/丙烯酰胺共聚物的分子链微结构与疏水缔合性

在实施丙烯酰胺型阴离子表面活性单体2-丙烯酰胺基十四烷磺酸钠(NaAMC14S)与丙烯酰胺(AM)水溶液均相共聚合过程中,分别通过改变AM与NaAMC14S的投料比、改变外加电解质NaCl的加入量以及引发剂的用量,制备了分子链微结构系列变化的具有微嵌段结构的共聚物NaAMC14S/AM;采用荧光探针法与表观粘度法研究了共聚物分子链微结构与其疏水缔合性能之间关系,探索了共聚物分子链中疏水微嵌段含量、疏水微嵌段长度及共聚物分子量诸微结构因数对共聚物疏水缔合性的影响.结果表明,共聚物NaAMC14S/AM的疏水缔合性随着疏水微嵌段含量的增加而增强,随着疏水微嵌段长度的增长而增强,当疏水微嵌段含量和嵌段长度一定时,共聚物的疏水缔合性随分子量的增大而增强.     

含孪尾型丙烯酰胺的HAPAM在新胶束聚合体系中的制备及其疏水缔合性

以表面活性单体2-丙烯酰胺基十二烷磺酸钠(NaAMC12S)为表面活性剂构建了新的胶束共聚合体系,实施了丙烯酰胺(AM)与N,N-二正十二烷基丙烯酰胺(DiC12AM)的胶束共聚合,制备了含孪尾型丙烯酰胺的疏水缔合聚丙烯酰胺(HAPAM),该聚合物为三元共聚物DiC12AM/NaAMC12S/AM.通过控制共聚合条件,制得了微结构系列变化的共聚物;采用红外光谱法表征了三元共聚物的化学结构,用荧光探针法与表观粘度法重点研究了共聚物DiC12AM/NaAMC12S/AM的大分子链微结构与其疏水缔合性的关系.结果表明:新胶束共聚合体系大大简化了胶束的共聚合操作,而且由于表面活性单体进入共聚物主链,使三元共聚物DiC12AM/NaAMC12S/AM具有更强的疏水缔合性.与由单尾型丙烯酰胺N-正十二烷基丙烯酰胺(C12AM)为疏水单体制备的HAPAM相比,由DiC12AM制得的HAPAM疏水缔合性更为显著.     

丙烯酰胺型阴离子表面活性单体与丙烯酰胺共聚物水溶液的流变特性

以丙烯酰胺型阴离子表面活性单体2-丙烯酰胺基十四烷基磺酸钠(NaAMC14S)为共单体,与丙烯酰胺(AM)的水溶液均相共聚合,使NaAMC14S的浓度分别处于临界胶束浓度上下,分别制备了具有无规结构与微嵌段结构的两类共聚物;用红外光谱法对共聚物的结构进行了表征,使用乌氏粘度法测定了特性粘数,相对表示出了共聚物的分子量;采用荧光探针法与表观粘度法重点研究了两类共聚物的疏水缔合性与水溶液的流变特性.研究结果表明,具有微嵌段结构的共聚物具有很强的疏水缔合性,当其水溶液的浓度达0.2wt%后,表观粘度迅速提高;其水溶液的切力变稀行为具有明显的可逆性,表现出强的抗剪切性能.本研究中特别发现,具有微嵌段结构的共聚物其盐水溶液的表观粘度远高于纯水溶液的表观粘度,当共聚物浓度为0.3wt%、CaCl2浓度为2wt%时,溶液的表观粘度竟然提高了3个数量级,表现出独特的正性盐敏性(即遇盐变稠).     

丙烯酰胺-苯乙烯双亲嵌段共聚物的微结构及水溶液行为

通过改变丙烯酰胺(AM)与苯乙烯(St)的投料比、苯乙烯与表面活性剂的加入量之比及引发剂加入量,在微乳液中制备了分子链微结构系列变化的丙烯酰胺-苯乙烯双亲嵌段共聚物(PAM-b-PSt),用荧光探针法与表面活性测定法详细地研究了共聚物中PSt嵌段长度、含量及分子量等微结构因素对共聚物在水溶液中的疏水缔合性与表面活性的影响.结果表明,当共聚物水溶液的浓度高于临界缔合浓度时,PAM-b-PSt的疏水缔合作用以分子间的缔合为主.若共聚物中PSt嵌段含量及分子链长一定时,随着PSt疏水嵌段长度增长,PAM-b-PSt的疏水缔合性增强,而对共聚物的表面活性影响很小.若共聚物中PSt疏水嵌段长度及分子链长一定时,PAM-b-PSt的疏水缔合性随着PSt嵌段含量的变化而变化,当PSt嵌段含量一定时,使大分子链之间产生最强的疏水缔合作用;而其表面活性则随着PSt嵌段含量的增大而增强.若共聚物中PSt疏水嵌段长度及含量一定时,分子量对其表面活性有较大的影响,分子量越高,表面活性越差;同时,在较稀的溶液浓度范围内,分子量对PAM-b-PSt的疏水缔合性的影响则很小.     

一种水溶性疏水缔合聚合物二临界缔合行为研究

对三元共聚疏水缔合聚合物（丙烯酰胺／十八烷基二甲基烯丙基氯化铵／苯乙烯）的临界缔合浓度进行研究,发现其具有二临界缔合现象以及其在二临界缔合浓度附近不同的耐温抗盐的流变行为。研究结果表明,该疏水缔合聚合物的第一临界缔合浓度（C1^＊）为500mg／L,第二临界缔合浓度（C2^＊）为2400mg／L;C2^＊附近聚合物溶液的耐温性能较差;抗盐性能表现出三种不同的情况：随着盐质量浓度的增加,C〈C1^＊时,溶液粘度下降;C1^＊〈C〈C2^＊时,溶液粘度先增加后下降;C〉C2^＊时,溶液粘度先快速增加,后缓慢增加,最后下降。     

水溶性疏水缔合聚合物在高岭土/水界面的吸附

表面活性剂;水溶性疏水缔合聚合物在高岭土/水界面的吸附     

兼具有强阴离子性与疏水缔合性的丙烯酰胺三元共聚物

在微乳液介质中实施了丙烯酰胺 (AM)、苯乙烯 (St)、2 丙烯酰胺基 2 甲基丙磺酸钠 (NaAMPS)的共聚合 ,制备了既含有强阴离子性基团 (—SO3Na)又含有疏水基团 (St)的丙烯酰胺三元共聚物AM NaAMPS St;通过红外光谱法、紫外分光光度法及元素分析法对共聚物的结构及组成进行了表征 ;稀释外推粘度法测定了共聚物的特性粘数 ;测定了共聚物纯水溶液及盐水溶液的表观粘度 ;荧光探针法考察了三元共聚物的疏水缔合性以及离子基团对疏水缔合性的影响规律 .实验结果表明 ,在聚丙烯酰胺 (PAM )分子主链上同时引入强阴离子性基团与疏水基团后 ,阴离子的电粘效应与疏水基团的疏水缔合作用相互协同 ,会使共聚物水溶液的黏度显著提高 ;盐溶液对疏水缔合作用的增强效应与强阴离子基团对盐的较大容忍度相互结合 ,会使共聚物水溶液的抗盐性能明显得以提高 ;大分子链上的强阴离子基团磺酸根的存在 ,在一定程度上会削弱疏水基团之间的疏水缔合作用 ,即对疏水基团的疏水缔合行为会产生一定的负性影响 .     

丙烯酰胺-苯乙烯双亲嵌段共聚物水溶液的粘度性能

通过改变丙烯酰胺 (AM)与苯乙烯 (St)两单体的投料比 ,在微乳液介质中制备了分子组成系列变化的丙烯酰胺 苯乙烯双亲嵌段共聚物 (PAM b PSt) ,使用旋转粘度计测定了共聚物水溶液的表观粘度 ,详细考察了共聚物浓度、共聚物链结构、剪切速率、盐度及温度等因素对共聚物水溶液表观粘度的影响规律 .研究结果表明 ,由于PAM b PSt分子链中的PSt疏水嵌段链段之间具有强的疏水缔合作用 ,导致其具有独特的流变性能 .当共聚物水溶液的浓度高于某一临界值后 ,疏水缔合作用以分子间的缔合为主 ,大分子链之间会形成动态物理交联网络 ,增大了流体力学体积 ,使PAM b PSt水溶液可产生良好的增稠性能 ;疏水缔合作用是一吸热过程 ,升高温度有利于分子间的缔合 ,因此PAM b PSt水溶液具有良好的耐温性 ;聚合物水溶液中盐类物质的存在 ,会增强溶剂的极性 ,有利于分子间的缔合 ,使PAM b PSt水溶液具有良好的耐盐性 .     

Effects of SDS on the thermo- and pH-sensitive structural changes of the poly(acrylic acid)-based copolymer containing both poly(N-isopropylacrylamide) and monomethoxy poly(ethylene glycol) grafts in water

The effects of SDS on the structural changes of the thermally induced polymeric micelles from a graft copolymer comprising poly(acrylic acid) (PAAc) as the backbone and poly(N-isopropylacrylamide) (PNIPAAm) and monomethoxy poly(ethylene glycol) (mPEG) as the grafts in aqueous solution are studied. At low temperature, SDS micelles form via the hydrophobic association of SDS molecules with the PNIPAAm grafts at a critical aggregation concentration of SDS (cac(SDS)) much lower than its critical micelle concentration. Consequently, the critical aggregation temperature of the graft copolymer is elevated. The corresponding structure of the thermally induced polymeric micelles is characterized by an abrupt reduction in the particle size and an increased tendency toward formation of the monocore structure with a more compact and hydrophobic PNIPAAm microdomain being developed. On the other hand, upon the polymeric micelle formation at high temperature, the copolymer-bound SDS micelle structure is disrupted and the dissociated SDS molecules migrate to the core-shell interface with their alkyl chains residing in the liquidlike region of the hydrophobic PNIPAAm microdomain. The correlation between the polymeric particles and copolymer-bound micelles is further substantiated by showing the change of the colloidal particle size in response to changes in cac(SDS) via adjusting the pH of the aqueous copolymer/SDS solutions.     

Formation of unimer nanoparticles by controlling the self-association of hydrophobically modified poly(amino acid)s

Amphiphilic block or graft copolymers have been demonstrated to form a variety of self-assembled nano/microstructures in selective solvents. In this study, the self-association behavior of biodegradable graft copolymers composed of poly(γ-glutamic acid) (γ-PGA) as the hydrophilic segment and L-phenylalanine (Phe) as the hydrophobic segment in aqueous solution was investigated. The association behavior and unimer nanoparticle formation of these γ-PGA-graft-Phe (γ-PGA-Phe) copolymers in aqueous solution were characterized with a focus on the effect of the Phe grafting degree on the intra- and interpolymer association of γ-PGA-Phe. The particle size and number of polymer aggregates (N(agg)) in one particle of the γ-PGA-Phe depended on the Phe grafting degree. The size of γ-PGA-Phe with 12, 27, 35, or 42% Phe grafting (γ-PGA-Phe-12, -27, -35, or -42) was about 8-14 nm and the N(agg) was about 1, supporting the presence of a unimolecular graft copolymer in PBS. The pyrene fluorescence data indicated that γ-PGA-Phe-35 and -42 have hydrophobic domains formed by the intrapolymer association of Phe attached to γ-PGA. These results suggest that the Phe grafting degree is critical to the association behavior of γ-PGA-Phe and that γ-PGA-Phe-35 and -42 could form unimer nanoparticles. Moreover, when γ-PGA-Phe-42 dissolved in DMSO was added to various concentrations of NaCl solution, the particle size and N(agg) could be easily controlled by changing the NaCl concentration during the formation of the particles. These results suggest that biodegradable γ-PGA-Phe is useful for the fabrication of very small nanoparticles. It is expected that γ-PGA-Phe nanoparticles, including unimer particles, will have great potential as multifunctional carriers for pharmaceutical and biomedical applications, such as drug and vaccine delivery systems.     

核磁共振谱研究PAA-F108-PAA 嵌段共聚物的胶束化行为

采用原子转移自由基聚合伴随水解的方法合成了聚丙烯酸-聚醚嵌段共聚物(PAA-F108-PAA), 并通过氢核磁共振波谱和二维核Overhauser效应谱(2D NOE)研究了温度、 羧酸基团中和度(α)及盐浓度对PAA-F108-PAA嵌段共聚物在水溶液中胶束化行为的影响. 结果表明, PAA-F108-PAA分子的临界胶束化温度受α影响较小, 受盐的种类和浓度影响较大. 当α=0.14(0.01 mol/L KCl)时, 在6 ℃条件下, PAA-F108-PAA分子处于塌缩状态, 而在60 ℃条件下, 聚氧化丙烯(PPO)链段发生疏水聚集形成胶束的核, PAA链段与PEO链段相互作用形成胶束的壳; 当α=0.80(0.01 mol/L KCl)时, 在6 ℃条件下, PAA-F108-PAA分子处于相对伸展状态, 而在60 ℃条件下, PPO链段仍发生疏水聚集形成胶束的核, PEO与PAA彼此分离形成胶束的壳. 增加KCl的浓度至1 mol/L, PAA-F108-PAA分子的临界胶束化温度显著降低, KCl对PPO和PEO链段都表现出脱水作用. 但KI的浓度增加至1 mol/L时, PAA-F108-PAA分子的临界胶束化温度仅略微增加, KI对PPO链段表现出脱水作用, 而对PEO链段表现出增溶作用.     

Microstructure and association property of hydrophobically modified polyacrylamide of a new family

A new family of hydrophobically modified polyacrylamides was synthesized via copolymerization of acrylamide (AM) and anionic surface-active monomer of acrylamide-type, sodium 2-acrylamido-tetradecane sulfonate (NaAMC₁₄S), in aqueous solution. In the copolymerization, by varying various factors, such as the feed ratio of NaAMC₁₄S to AM and the amount of added electrolyte NaCl and initiator, we prepared copolymers NaAMC₁₄S/AM with different block structures. The relationship between structures and hydrophobic association properties of copolymer chains was studied by using fluorescence probe and viscosimetry. Effects of the content and length of the hydrophobic blocks and the total molecular weight on hydrophobic association of the copolymers in pure water and in brine solution were examined, respectively. The results show that in pure water, hydrophobic association of the copolymers was enhanced as the content and length of the hydrophobic block increase. On the other hands, for a given content and length of the hydrophobic block, the hydrophobic association of the copolymers was enhanced as the total molecular weight increases. For all the copolymers studied, the apparent viscosity of their solutions in pure water has a limited value, but the apparent viscosities of the copolymer brine solutions are much higher than that of their corresponding water solutions, and show strong positive salinity sensitivity. Similarly, the hydrophobic association of the copolymer in brine solutions was enhanced as the content and length of the hydrophobic block increase.     

Interaction of amphiphilic block copolymer micelles with surfactants

An out line and summary of literature studies on interactions between different types of amphiphilic copolymer micelles with surfactants has been given. This field of research is still emerging and it is difficult presently to make generalisations on the effects of surfactants on the copolymer association. The effects are found to be varied depending upon the nature and type of hydrophobic (hp) core and molecular architecture of the copolymers and the hydrocarbon chain length and head group of surfactants. The information available on limited studies shows that both anionic and cationic surfactants (in micellar or molecular form) equally interact strongly with the associated and unassociated forms of copolymers. The beginning of the interaction is typically displayed as critical aggregation concentration (CAC), which lies always below the critical micelle concentration of the respective surfactant. The surfactants first bind to the hydrophobic core of the copolymer micelles followed by their interaction with the hydrophilic (hl) corona parts. The extent of binding highly depends upon the nature, hydropobicity of the copolymer molecules, length of the hydrocarbon tail and nature of the head group of the surfactant. The micellization of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO)–poly(ethylene oxide) was found to be suppressed by the added surfactants and at higher surfactant concentrations, the block copolymer micelles get completely demicellized. This effect was manifested itself in the melting of liquid crystalline phases in the high copolymer concentrations. However, no such destabilization was found for the micelles of polystyrene (PS)–poly(ethylene oxide) copolymers in water. On the contrary, the presence of micellar bound surfactant associates resulted in to large super micellar aggregates through induced intra micellar interactions. But with the change in the hydrophobic part from polystyrene to poly(butadiene) (PB) in the copolymer, the added surfactants not only reduced the micellar size but also transformed cylindrical micelles to spherical ones. The mixtures in general exhibited synergistic effects. So varied association responses were noted in the mixed solutions of surfactants and copolymers.     

树枝状聚(醚-酰胺)基胶束的制备及其形貌研究

采用ε-己内酯(CL)开环聚合的方法首先合成树枝状聚(醚-酰胺)基(DPEA)星形聚合物star-PCL,再与异氰酸基封端的PEG(PEG-NCO)偶合制备了两亲性树枝状聚(醚-酰胺)基星形嵌段聚合物star-PCL-b-PEG.利用FT-IR、1H-NMR和GPC分析测试手段对star-PCL-b-PEG的结构进行了表征.通过滴加选择性溶剂的方法,制备了star-PCL-b-PEG以水为介质的类似"平头"聚集体胶束溶液.采用荧光光谱法测得star-PCL-b-PEG水溶液的临界胶束浓度(CMC)为1.623mg/L;采用激光光散射仪测得其在浓度0.15mg/mL和0.5mg/mL的流体力学半径分别为86.2nm和224.6nm,其多分散指数分别为0.115和0.197.透射电镜(TEM)观察发现胶束的形貌受共溶剂的特性,初始聚合物浓度,水含量等因素的影响.