Facile Fabrication of Platinum Nanoparticles Supported on Nitrogen-doped Carbon Nanotubes and Their Catalytic Activity

A facile impregnation method under mild condition is designed for synthesis of highly dispersed Pt nanoparticles with a narrow size of 4-7 nm on nitrogen-doped carbon nanotubes （CNx）. CNx do not need any pre-surface modification due to the inherent chemical activity. The structure and nature of Pt/CNx were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and energy dispersive spectroscopy spectrum. All the experimental results revealed that the large amount of doped nitrogen atoms in CNx was virtually effective for capturing the Pt（IV） ions. The improved surface nitrogen functionalities and hydrophilicity contributed to the good dispersion and immobi- lization of Pt nanoparticles on the CNx surface. The Pt/CNx served as active and reusable catalysts in the hydrogenation of allyl alcohol. This could be attributed to high dispersion of Pt nanoparticles and stronger interaction between Pt and the supports, which prevented the Pt nanoparticles from aggregating into less active Pt black and from leaching as well.     

Effect of annealing on structural and optical properties of lead tungstate microcrystals

Shuttle-like lead tungstate (PbWO₄) microcrystals are synthesized at room temperature using the precipitation method with the cetyltrimethyl ammonium bromide. Results from both the X-ray diffraction and the scanning electron microscopy show that the lattice distortions of the PbWO₄ microcrystals are reduced significantly when the annealing temperature is increased to 873 K. The result from the ultraviolet-visible diffuse reflectance spectroscopy shows that the exciton absorption appears in the sample annealed at 673 K. The self-trapped exciton luminescence due to the Jahn-Teller effect is also observed in the blue band. The interstitial oxygen ions in the WO₄^2- groups are mainly resposible for the enhancement effect of the green luminescence of the annealed samples. The above results are supported by the spectrum analysis of the as-grown and the post-annealed samples using the X-ray photoelectron spectroscopy.     

深紫外激光光发射与热发射电子显微镜在热扩散阴极研究中的应用

对热扩散阴极表面微区发射状态进行原位观察和分析一直是热阴极研究的重要课题.本文着重介绍深紫外激光光发射电子/热发射电子显微镜的基本原理及其在热扩散阴极研究中的典型实例.系统配备了高温激活所用的加热装置,样品可被加热至1400℃.系统具有光发射电子、阴极热发射电子、光发射电子和阴极热发射电子联合三种电子成像模式.应用表明,对于热扩散阴极而言,深紫外激光光发射电子像适于呈现阴极表面的微观结构形貌;热发射电子像适于反映阴极表面的本征热电子发射及均匀性;光电子和热电子联合成像适于对阴极表面的有效发射点做出精确定位.     

P2型钠离子电池正极材料Na0.66Mn0.675Ni0.1625Co0.1625O2的表面重构及其演变的电子显微表征

采用球差校正扫描透射电子显微镜(STEM)、X射线能谱(EDS)等分析手段表征了高温固相法合成的Na_0.66Mn_0.675Ni_0.1625Co_0.1625O₂钠离子过渡金属氧化物正极材料。X射线衍射(XRD)结果表明该材料为结晶性良好的P2型钠离子层状氧化物(P6₃/mmc)。原子尺度的结构与成分分析显示材料表面存在宽度约为1-2 nm的表面重构层,重构区域内存在大量晶格畸变与反位缺陷,并伴有一定程度的成分偏析——表面富钴(Co)、缺镍(Ni)。进一步研究表明这些表面重构区域在时效过程中会发生明显的“退化”,即初始表面重构层宽度会进一步扩展至5-10 nm,部分区域钠离子耗尽,由层状结构转变为尖晶石(Spinel,Fd3m)与岩盐相(rocksalt,Fm3m)共存的结构。     

硼硅酸盐玻璃的电子辐照效应

在高放废物长期地质处置过程中,作为第一层工程屏障的固化体玻璃会受到持续的电子辐照,研究其电子辐照效应对高放废物的长期安全处置具有重要的意义。在透射电子显微镜(TEM)上对硼硅酸盐玻璃样品进行原位电子辐照实验。在电子束的作用下,两种硼硅酸盐玻璃均很快发生相分离现象,这主要是由于电离作用导致Na的迁移或逃逸引起网络体结构重组的结果。引入简单的结构模型解释了两种不同组分硼硅酸盐玻璃相分离的不同,结果表明,相分离的不同与玻璃组分中Na成分的多少密切相关。     

Microstructure and its influence on CH4 adsorption behavior of deep coal

In this paper we investigate the influence of microstructure on the CH4 adsorption behavior of deep coal. The coal microstructure is characterized by N2 adsorption at 77 K, scanning electron microscopy （SEM）, Raman spectroscopy, and Fourier transform infrared spectroscopy （FT-IR）. The CH4 adsorptions are measured at 298 K at pressures up to 5.0 MPa by the the volumetric method and fitted by the Langmuir model. The results show that the Langmuir model fits well with the experimental data, and there is a positive correlation with surface area, pore volume, ID/IG, and CH4 adsorption capacity. The burial depth also affects the methane adsorption capacity of the samples.     

Spectroscopic properties and mechanism of Tm^3＋/Er^3＋/Yb^3＋ co-doped oxyfluorogermanate glass ceramics containing BaF2 nanocrystals

Transparent Tm^3＋/Er^3＋/yb^3＋ co-doped oxyfluorogermanate glass ceramics containing BaF2 nanocrystals are prepared. Under excitation of a 980-nm laser diode （LD）, compared with the glass before heat treatment, the Tm^3＋/Er^3＋/yb^3＋ co-doped oxyfluorogermanate glass ceramics can emit intense blue, green and red up-conversion luminescence and Stark- split peaks; X-ray diffraction （XRD） and transmission electron microscope （TEM） results show that BaF2 nanocrystals with an average diameter of 20 nm are precipitated from the glass matrix. Stark splitting of the up-conversion luminescence peaks in the glass ceramics indicates that Tm^3＋, Er^3＋ and （or） Yb^3＋ ions are incorporated into the BaF2 nanocrystals. The up-conversion luminescence intensities of Tm^3＋, Er^3＋ and the splitting degree of luminescence peaks in the glass ceramics increase significantly with the increase of heat treat temperature and heat treat time extension. In addition, the possible energy transfer process between rare earth ions and the up-conversion luminescence mechanism are also proposed.     

A study of transition from n-to p-type based on hexagonal WO3 nanorods sensor

Hexagonal WO3 nanorods are fabricated by a facile hydrothermal process at 180 ℃ using sodium tungstate and sodium chloride as starting materials. The morphology, structure, and composition of the prepared nanorods are studied by scanning electron microscopy, X-ray diffraction spectroscopy, and energy dispersive spectroscopy. It is found that the agglomeration of the nanorods is strongly dependent on the PH value of the reaction solution. Uniform and isolated WO3 nanorods with diameters ranging from 100 nm-150 nm and lengths up to several micrometers are obtained at PH = 2.5 and the nanorods are identified as being hexagonal in phase structure. The sensing characteristics of the WO3 nanorod sensor are obtained by measuring the dynamic response to NO2 with concentrations in the range 0.5 ppm-5 ppm and at working temperatures in the range 25 ℃-250 ℃. The obtained WO3 nanorods sensors are found to exhibit opposite sensing behaviors, depending on the working temperature. When being exposed to oxidizing NO2 gas, the WO3 nanorod sensor behaves as an n-type semiconductor as expected when the working temperature is higher than 50 ℃, whereas, it behaves as a p-type semiconductor below 50 ℃. The origin of the n- to p-type transition is correlated with the formation of an inversion layer at the surface of the WO3 nanorod at room temperature. This finding is useful for making new room temperature NO2 sensors based on hexagonal WO3 nanorods.     

Large coercivity and unconventional exchange coupling in manganese-oxide-coated manganese gallium nanoparticles

The microstructures and magnetic properties of nanoparticles, each composed of an antiferromagnetic （AFM） manganese-oxide shell and a ferromagnetic-like core of manganese-gallium （MnGa） compounds, are studied. The coreshell structure is confirmed by transmission electron microscope （TEM）. The ferromagnetic-like core contains three kinds of MnGa binary compounds, i.e., ferrimagnetic （FI） DO22-type MnaGa, ferromagnetic （FM） Mn8Gas, and AFM DO19-type Mn3Ga, of which the first two correspond respectively to a hard magnetic phase and to a soft one. Decoupling effect between these two phases is found at low temperature, which weakens gradually with increasing temperature and disappears above 200 K. The exchange bias （EB） effect is observed simultaneously, which is caused by the exchange coupling between the AFM shell and FM-like core. A large coercivity of 6.96 kOe （1Oe = 79.5775 A·m^-1） and a maximum EB value of 0.45 kOe are achieved at 300 K and 200 K respectively.     

K_2S-activated carbons developed from coal and their methane adsorption behaviors

The main purpose of this work is to prepare various activated carbons by K2S activation of coal with size fractions of 60-80 meshes, and investigate the microporosity development and corresponding methane storage capacities. Raw coal is mixed with K2S powder, and then heated at 750 ℃-900 ℃ for 30 min-150 min in N2 atmosphere to produce the adsorbents. The texture and surface morphology are characterized by a N2 adsorption/desorption isotherm at 77 K and scanning electron microscopy （SEM）. The chemical properties of carbons are confirmed by ultimate analysis. The crystal structure and degree of graphitization are tested by X-ray diffraction and Raman spectra. The relationship between sulfur content and the specific surface area of the adsorbents is also determined. K2S activation is helps to bring about better development of pore texture. These adsorbents are microporous materials with textural parameters increasing in a range of specific surface area 72.27 m2/g-657.7 m2/g and micropore volume 0.035 cm3/g-0.334 cm3/g. The ability of activated carbons to adsorb methane is measured at 298 K and at pressures up to 5.0 MPa by a volumetric method. The Langmuir model fits the experimental data well. It is concluded that the high specific surface area and micropore volume of activated carbons do determine methane adsorption capacity. The adsorbents obtained at 800 ℃ for 90 min with K2S/raw coal mass ratios of 1.0 and 1.2 show the highest methane adsorption capacities amounting to 106.98 mg/g and 106.17 mg/g, respectively.