几个金属卤素簇的合成与性能研究

The hydrothermal reaction of CuBr2 and CuBr with phen·H2O （phen= 1,10-phenanthroline） in a molar ratio of 1：1：1.5 gave birth to the first copper-halo cationic cluster [Cu2^Ⅱ Cu2^Br4 （phen）4 ] ^2＋（1） with tetranuclear anionic cluster [Cu4Br6]^2-. Changing the precursors or their molar ratios, two mononuclear complexes [Cu（phen）2Br]Br·H2O （2） and [Ni（phen）3][CuCl2]2 （3） as well as two unusual copper-halo chains found in polymers [Cu2Br2（phen）]∞ （4） and [Cu^ⅡCu3^ⅠBr2Ⅰ3 （phen）2 ]∞ （5） were obtained. The （Cu2Br2）∞ chain of 4 looks like a linearar ray of hexagons based on fused Cu3Br3 units, and the linear （Cu3Ⅰ3Br^-）∞ chain of 5 is an alternate combination of the rhombic Cu2I2 cores and the Cu4I4Br2^2- units. In addition, the hydrothermal reaction of CuBr2 with NA（NA=nicotinic acid） or INA （INA =isonicotinic acid） resulted in the syntheses of two compounds [CuBr（NA）] （6） and [CuBr（INA）]∞（7） containing staircase chain. Among them the third-order non-linear optical properties of 2, 5, 6 and 7 were investigated and all exhibit the reverse saturable absorption （α2〉0） and self-defocusing performance （n2〈0）.     

蒂巴茵衍生物的合成研究

The reaction of 7α-acetyl-6,14-endoethano-6,7,8,14-tetrahydrothebaine with 2-（thien-2-yl）ethylmagnesium bromide was investigated. The tertiary alcohol derivative 7α-[R-l-hydroxyl-l-methyl-3-（thien-2-yl）propyl]）-6,14- endoethano-6,7,8,14-tetrahydrothebaine （3） and a by-product 4 were isolated. The structure of 4 was elucidated by X-ray analysis. The Grignard reaction shows high degree of stereoselectivity according with Cram rule. The crystal structure of 4 indicates that dihydrofuran ring was opened to form a phenolic hydroxyl group and a three-membered ring structure. It maintains the main rigid structure of morphine and contains a C（6）-C（14） enthano bridge. The 1-hydroxyl-1-methyl-3-（thien-2-yl）propyl group at C（7） position adopted S-configuration.     

水杨醛-L-甲硫氨酸希夫碱钴(Ⅱ)配合物的热分解动力学

本文合成了一种新的希夫碱配合物，水杨醛－Ｌ－甲硫氨酸－水合钴（Ⅱ），Ｃｏ（ｓａｌｍｅｔ）．Ｈ２Ｏ并用非等温热重法研究了它的热分解反应动力学。     

Imidazole Coordinated Sandwich-type Antimony Polyoxotungstates Na9[ {Na（H=O2}3{M（C3H4N2）}3（ Sb W9O33）2]·xH=O（M=Ni^Ⅱ, Co^Ⅱ, Zn^Ⅱ, Mn^Ⅱ）

The imidazole covalently coordinated sandwich-type heteropolymngstates Na9[ {Na（H=O2}3{M（C3H4N2）}3（ Sb W9O33）2]·xH=O（M=Ni^Ⅱ, Co^Ⅱ, Zn^Ⅱ, Mn^Ⅱ） were obtained by the reaction of Na2WO4·2H2O, SbCl3·6H2O, NiCl2·6H2O [MnSO4·H2O, Co（NO3）2·6H2O, ZnSO4·7H2O] and imidazole at pH≈7.5. The structure of Na9[{Na（H2O）2}3{Ni（C3H4N2）}3（SbW9O33）2]·32H2O was determined by single crystal X-ray diffraction. Polyanion [{Na（H2O）2}3{Ni（C3H4N2）}3（SbW9O33）2}3]^9- has approximate C3v symmetry, imidazole coordinated six-nuclear duster [{Na（H2O）2}3{Ni（C3H4N2）}3]^9＋ is encapsulated between two （α-SbW9O33）^9-, the three rings of imidazole in the polyanion are perpendicular to the horizontal plane formed by six metals （Na-Ni-Na-Ni-Na-Ni） in the central belt, and x-stacking interactions exist between imidazoles of neighboring polyanions with dihedral angel of 60%. The compounds were also characterized by IR, UV-Vis spectra, TG and DSC, and the thermal decomposition mechanism of the four compounds was suggested by TG curves.     

不对称Salen-Mn(Ⅲ)配合物催化PNPP水解的动力学研究

用分光光度法研究了两种不对称Salen-Mn(Ⅲ)配合物催化α-吡啶甲酸对硝基苯酚酯(PNPP)的水解动力学.提出了相应的PNPP催化水解机理,讨论了底物浓度、体系的酸碱度、温度以及配合物结构对PNPP催化水解反应的影响.结果表明:此两种Schiff碱锰(Ⅲ)配合物在催化PNPP水解中均表现出较好的催化活性,PNPP水解速率随着底物浓度、体系pH值的增大而增大;在15～55℃温度范围内,未观察到催化剂失活现象;其中,带有苯并氮杂-15-冠-5侧基的不对称Salen-Mn(Ⅲ)配合物比带有吗啉基的另一配合物拥有更高的催化活性,这可能主要由这两种模拟水解酶之间较大的疏水微环境差异所引起.     

全反式维甲酸合钇(Ⅲ)配合物对DNA的切割和键合作用(英)

以紫外光谱、荧光光谱、粘度法和凝胶电泳方法研究了全反式维甲酸合钇(Ⅲ)配合物与DNA的作用。结果表明，该配合物能在生理条件下比配体和金属离子更有效地切割质粒DNA，体系离子强度和pH值的变化对配合物的切割活性有较大影响，自由基捕捉剂的加入不影响配合物的切割活性。该配合物对DNA的切割可能通过水解机理进行。该配合物可使DNA的粘度增加，使EB-DNA体系的荧光强度和DNA溶液的紫外吸收强度降低。据此推断，该配合物主要以嵌入方式与DNA作用。     

Phenylsulfonic Acid Functionalized Mesoporous Silica Catalyzed Transetherification of Alcohols with Dimethoxymethane

Phenylsulfonic acid functionalized mesoporous silica was synthesized by condensation of tetraethylorthosilicate with phenyltrimethoxysilane, and then sulfonation using 30% fuming sulfuric acid. The material was characterized using FT‐IR, DSC, XPS, TEM and N2 adsorption/desorption measurements. DSC revealed that sulfonic acid group of the catalyst was decomposed at 354.8°C, indicating that the catalyst exhibited high thermal stability. XPS showed that there existed three kinds of different silicon species on surface of the catalyst. The catalytic performance of the catalyst was evaluated using transetherification of alcohols with dimethoxymethane. It was found that among primary alcohols, the selectivities of the two long‐chain alcohols for n‐dedocanol and n‐tetradecyl alcohol were higher than 97.0% at the conversions of 43.6% and 65.3%, respectively, while the selectivities of the short‐chain alcohols except for n‐hexanol were less than 90.0% at the conversions of over 80.0%. Due to steric barrier, the secondary alcohols such as iso‐butanol and cyclohexanol afforded conversions of 79.4% and 60.5%, and the selectivities of the two alcohols were more than 90.0%. The sequence in conversion of the substituted phenols is as follows: p‐nitrophenol>p‐fluorophenol≥p‐bromophenol>p‐cresol>m‐cresol.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

铂锡双金属催化剂上丙烷脱氢反应研究

对比研究了Ｓｎ／Ｐｔ比为１；１，２，：１和５：１的原子簇担载于γ－Ａｌ２Ｏ３上制成的Ｐｔ＝Ｓｎ原子簇催化剂，和用ＳｎＣｌ２和Ｈ２ＰｔＣｌ６浸渍制备的相应Ｓｎ／Ｐｔ比的催化剂对丙烷脱氢生成丙烯的催化性能。     

硫酸颜色反应用于荧光法测定利血平研究

提出了硫酸颜色反应用于利血平的荧光分析新方法。利用血平与浓硫酸反应，生成强荧光物质，所得产物的荧光强度与利血平的浓度在０－０．６μｇ／ｍＬ范围内有良好的线性关系。检测限为０．２ｎｇ／ｍＬ。本法可直接用于尿液中利血平的定量分析，回收率为８２．５％－８４．２％。