超临界CO2固相接枝法制备马来酸酐改性聚丙烯的分级与表征

采用不同溶剂的连续萃取法,对超临界CO2固相接枝法制备的马来酸酐改性聚丙烯(PP-g-MAH)进行分级并获得了等规度不同的级份。对所得级份用傅立叶变换红外光谱仪(FT-IR)、差示扫描量热仪(DSC)和偏光显微镜(POM)表征,结果表明:接枝率不同的级份所对应的材料性能存在明显差异,接枝反应更易发生在非晶区或结晶不完善的区域,但接枝率越高的PP-g-MAH接枝越均匀。     

金属盐对O2/CO2煤粉混燃钙基脱硫反应的影响

利用添加剂调制改性的方法，考察了以碳酸钠为代表的金属盐对石灰石微观结构的影响，得出调制改性优化了石灰石的物理结构，并在离子比γ为15∶1的加入量效果最佳。在此基础上，借助定硫仪比较了O2-CO2气氛下调制前后石灰石对燃煤SO2释放的影响，并对燃烧产物进行灰熔点分析及灰成分的XRD测试。实验结果表明，在不影响煤粉燃烧结渣特性的前提下，改性后的石灰石可以更有效地抑制SO2的排放，固硫效果在1 000 ℃时达到最佳。     

富勒醇清除OH自由基的ESR研究

富勒醇清除·ＯＨ自由基的ＥＳＲ研究祝严师，孙大勇，刘桂珍，刘子阳，詹瑞云，刘淑莹（中国科学院长春应用化学研究所应用谱学开放实验室，长春，１３００２２）关键词Ｃ_（６０），富勒醇，ＯＨ自由基，自旋捕捉，ＥＳＲ生物体内的许多现象均涉及到自由基反应，现已发?..     

Cr/CeO2体系及其对乙烷脱氢反应催化性能的研究

The dehydrogenation reaction of ethane over Cr/CeO₂ catalysts in presence of CO₂ was studied with fixed-bed micro-reactor. The Cr/CeO₂ catalysts of different Cr loading have been synthesized using impregnation techniques. The Cr/CeO₂ system has already been found to be active and selective in the reaction at around 740 ℃. The function of carbon dioxide is to remove coke and hydrogen to accelerate dehydrogenation of ethane. The results of catalysts characterizations indicated that Cr³⁺ and Cr⁶⁺ occurred on the surface of the catalysts. The 1.2 mmol Cr/100m₂ CeO₂ catalyst sample with a monolayer dispersion of Cr on CeO₂ support showed a stronger surface acidity and a maximum yield of ethylene of about 35.5% at 36.6% conversion of ethane.     

微量吸附量热技术在NH2-SBA-15合成中的应用

采用共价接枝法, 以氨丙基-三乙氧基硅烷为氨源, 制备了一系列的NH2-SBA-15催化剂, 通过微量吸附量热技术定量地分析了该催化剂表面碱性中心的强度、数量和分布状态. 实验结果表明, SBA-15在 550 ℃焙烧6 h, 氨基硅源与SBA-15质量比为1.5, 是合成NH2-SBA-15催化剂最适宜的条件. 运用微量吸附量热技术实现了对NH2-SBA-15催化剂合成条件的优化.     

水中悬浮气泡法研究水合物生长动力学

提出了利用测定温度、压力与水中悬浮气泡表面上水合物生长速度的关系, 以获得普遍适用的水合物生成动力学数据的新实验方法. 采用Gibbs自由能差作为反应推动力对所测的甲烷、二氧化碳气泡水合物生长动力学数据进行了关联, 取得了较好的效果. 对实验中发现的新现象进行了描述和解释.     

Oxidation of Styrene with Molecular Oxygen in Supercritical CO2

The oxidation of styrene with molecular oxygen catalyzed by PdCl2 CuCl2 has been investigated in supercritical CO2 with a batch reactor. The oxidative system of styrene contains four components at the beginning and seven components during the reaction. The critical temperature, critical pressure, and critical density at different conversions are determined by using a high-pressure view cell. The effect of phase behavior on the conversion and selectivity were studied. Experimental results showed that the critical parameters of the reaction mixture at fixed initial molar ratio changed with the conversion of reactant. The conversion of styrene reached maximum near the critical density of the reaction mixture. Product selectivity also varied with density of reaction mixture and could be tuned to some degree.     

Application of Short-wave Near-infrared Reflectance Spectroscopy in Controlling Extract of Fructus Cnidii Using Supercritical Carbon Dioxide

Fructus cnidii （Chinese name shechuangzi） is the fruit produced by Cnidium monnieri （L.） Cusson （Umbelliferae）. It is a perennial herb that is used to treat skin-related diseases and gynecopathyell. Recent pharmacological studies have revealed crude extracts or components isolated from fructus cnidii possess antiallergic, antipruritic, antidermatophytic, antibacterial, antifungal, and antiosteoporotic activities. Osthole and imperatorin are the major compounds present in shechuangzi. They are often used as standards for the evaluation of the quality of shechuangzi products.     

Mo、W金属氧化物对CH4/CO2重整Ni基催化剂性能的影响

用XRD、XPS、元素分析、TEM和活性评价等方法研究过渡金属氧化物MoO3和WO3对SiO2负载的Ni基催化剂物理化学性质和CH4/CO2重整制合成气催化性能的影响.结果表明,在负载型的镍催化剂中,MoO3和WO3的添加一方面提高了Ni的核外电子密度,减弱了对CH4深度裂解积炭;另一方面使催化剂表面镍的相对浓度降低,结构上起到了隔离、分散金属颗粒的作用,氧的相对浓度升高,有效提高了催化剂的抗烧结和抗积炭能力,显示出较好的催化稳定性.     

复合半导体负载金属材料光催化性能研究

CO₂和烃类光催化直接合成烃类氧化物在合成化学、碳资源利用和环境保护等方面均有重大意义。用溶胶-凝胶和浸渍-还原相结合的方法制得M/V₂O₅-TiO₂(M=Pd、Cu、Ni和Ag)光催化剂。利用XRD、TPR、IR、TPD、UV-Vis DRS和光反应器等技术研究了负载金属复合半导体的物相结构、吸附性能、光吸收性能和光催化反应性能。结果表明：金属负载在复合半导体上延迟了TiO₂由锐钛矿向金红石相的转化,增强了V与载体TiO₂的相互作用,使TiO₂光吸收限发生蓝移,对可见光部分的吸收明显增加,拓宽了催化剂的光响应范围;材料吸光性能强弱顺序Pd/V₂O₅-TiO₂ >Cu/V₂O₅-TiO₂ >Ag/V₂O₅-TiO₂>Ni/V₂O₅-TiO₂;材料的吸附性能及反应物的吸附态是反应发生的关键,CO₂在Ag/V₂O₅-TiO₂表面无法形成卧式吸附态,没有目的产物甲基丙烯酸(MAA)生成,光量子效率低;光吸收性能较好的Pd/V₂O₅-TiO₂对CO₂吸附能力过强,卧式吸附态脱附温度高,光催化效率不高;Cu/V₂O₅-TiO₂对CO₂吸附能力适中,CO₂与C₃H₆脱附温度较接近,实现了“光-表面-热”的协同作用,光量子效率最高,达15.1%。