一种改进的计算探测器校正因子的相关抽样方法

对于小尺寸探测器处于大块介质的情形, 在探测器的校正因子的Monte Carlo模拟中, 存在两个难题: 一是由于探测器尺寸很小粒子难以到达探测器并发生碰撞; 二是两个随机变量比值难以达到要求精度. 本文使用经过改进的粒子碰撞自动重要抽样方法, 再结合相关抽样方法, 解决了这两个难题, 并在MCNP-4C程序平台上加以实现. 除了粒子碰撞自动重要抽样以外, 还选用了其他3种方法: 直接模拟、区域分裂、强迫碰撞+Dxtran球分别与相关抽样方法结合, 对一个简化的探测器校正因子计算模型进行了计算. 实际计算结果表明, 相关抽样方法无论与哪种方法结合, 都起到了提高相关量计算效率的作用; 而它与粒子碰撞自动重要抽样结合, 比其他方法具有明显的优越性.     

Structural and magnetic properties of RF sputtered FePt/Fe multilayers

Series of [FePt(4min)/Fe(t_Fe)]₁₀ multilayers have been prepared by RF magnetron sputtering and post-annealing in order to optimize their magnetic properties by structural designs. The structure, surface morphology, composition and magnetic properties of the deposited films have been characterized by X-ray diffractometer (XRD), Rutherford backscattering (RBS), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX) and vibrating sample magnetometer (VSM). It is found that after annealing at temperatures above 500 °C, FePt phase undergoes a phase transition from disordered FCC to ordered FCT structure, and becomes a hard magnetic phase. X-ray diffraction studies on the series of [FePt/Fe]_n multilayer with varying Fe layer thickness annealed at 500 and 600 °C show that lattice constants change with Fe layer thickness and annealing temperature. Both lattice constants a and c are smaller than those of standard ones, and lattice constant a decreases as Fe layer deposition time increases. Only a slight increase in grain size was observed as Fe layer decreased in samples annealed at 500 °C. However, the increase in grain size is large in samples annealed at 600 °C. The coercivities of [FePt/Fe]_n multilayers decrease with Fe layer deposition time, and the energy product (BH)_max reaches a maximum in the samples with Fe layer deposition time of 3 min. Comparison of magnetic properties with structure showed an almost linear relationship between the lattice constant a and the coercivities of the FePt phase.     

A complete global solution to the pressure gradient equation

We study the domain of existence of a solution to a Riemann problem for the pressure gradient equation in two space dimensions. The Riemann problem is the expansion of a quadrant of gas of constant state into the other three vacuum quadrants. The global existence of a smooth solution was established in Dai and Zhang [Z. Dai, T. Zhang, Existence of a global smooth solution for a degenerate Goursat problem of gas dynamics, Arch. Ration. Mech. Anal. 155 (2000) 277-298] up to the free boundary of vacuum. We prove that the vacuum boundary is the coordinate axes.     

基于VAGUE集多准则决策的模糊TOPSIS方法

给出了V AGUE集之间距离的新定义,在此基础上,提出一个基于V AGUE集多准则决策的模糊TOP-S IS方法,它为决策系统提供了一个有用的工具,并通过例子阐明本文方法的有效性.     

19F+27Al耗散反应中双核系统的转动与形变

测量了¹⁹F+²⁷Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110.25MeV到118.75MeV, 能量步长为250keV. 从产物的 能量自关联函数中提取了反应中所形成的中间双核系统的转动惯量, 与相粘模型计算的刚体转动惯量相比较, 结果表明形成的双核系统有大的形变.     

线性常微分方程的保线性变换及其应用

研究了线性常微分方程的保线性变换，得到任意两个二阶线性常微分方程等价的条件，并用于求解一类二阶线性变系数齐次常微分方程．对数学物理方法教学中怎样通过适当的变换把给定的二阶线性变系数齐次常微分方程化为可解的方程给出了合理解释。     

Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

LD泵浦固体激光器基模振荡光的场分布噪音

通过调整泵浦光直径,使得LD端面泵浦固体激光器的振荡光工作于基模.在排除高阶横模的条件下,测量了由于热透镜的不稳定引起的光场场分布的噪音.实验发现,基模振荡光的高斯半径、光束指向角都在波动,而且光斑存在畸变波动.对一个未采取抑制措施的2W连续LD端面泵浦Nd:YAG固体激光器进行了测量.结果表明,在总功率不变的情况下,激光束峰值点附近的光强波动达到6.3%;激光的高斯半径波动达到5.8%;激光的指向角波动达到0.3mrad.     

FORWARD-BACKWARD STOCHASTIC DIFFERENTIAL EQUATIONS WITH STOPPING TIME

The existence and uniqueness results of fully coupled forward-backward stochastic differential equations with stopping time (unbounded) is obtained. One kind of comparison theorem for this kind of equations is also proved.