Multiwalled Carbon Nanotubes Modified with Silylated-salicylaldimine Co(II) and Pd(II) Complexes as Precatalysts in Ethylene Oligomerization

MWCNTs-Co(II) and Pd(II) were prepared through grafting silylated-salicylaldimine Pd(II) and Co(II) on multiwalled carbon nanotubes(MWCNTs) for ethylene oligomerization. The structures of the two MWCNTs-supported catalysts were characterized by means of scanning electron microscopy(SEM), X-ray diffraction(XRD), Fourier transform infrared(FTIR) spectroscopy, thermogravimetric analyses(TGA) and nitrogen adsorption and desorption. And the influence of the supported pattern on the catalytic properties for ethylene oligomerization was investigated. The results revealed that the silylated-salicylaldimine complexes were grafted on the inner and outer surfaces of the carbon nanotubes and the pore size and BET surface area of MWCNTs decreased. Compared with the homogeneous catalysts, the two MWCNTs-supported catalysts had higher selectivity for hexene and 1-hexene in the presence of diethylaluminum chloride(DEAC) with a small molecule size due to confinement effect. MWCNTs-Pd exhi-bited higher activity and higher selectivity for C₈⁺ olefin compared to MWCNTs-Co due to electronic factors. The catalytic activities of MWCNTs-Pd and MWCNTs-Co decreased from 24.18×10⁵g·(mol Pd·h)^–1 and 20.57×10⁵g·(mol Co·h)^–1 to 19.79×10⁵g·(mol Pd·h)^–1 and 13.14×10⁵g·(mol Co·h)^–1 after the third recycle reaction, respectively.     

Highly Active Electrocatalyst Derived from ZIF-8 Decorated with Iron(III) and Cobalt(III) Porphyrin Toward Efficient Oxygen Reduction in Both Alkaline and Acidic Media

Zeolite imidazole frameworks 8(ZIF-8) and modified ones after pyrolysis are highly promising toward oxygen reduction reaction(ORR). Especially, the compositional modification of ZIF-8 is crucial to the enhancement of ORR performance, yet limited to the substitution of skeletal Zn(II) with other cations or simple physical adsorption of cations. Herein, we report the decoration of ZIF-8 with ORR active hemin(FeP) and Co(III) protoporphyrin(CoP) via the coordination between the peripheral carboxylic group of FeP and CoP with skeletal Zn(II). This allows well control over the quantity of loaded FeP and CoP, critical to the synthesis of advanced electrocatalysts. Subsequent pyrolysis of FeP and CoP co-decorated ZIF-8 leads to highly active ORR electrocatalysts with a half-wave potential(E_1/2) of 0. 913 V(vs. RHE) in 0.1 mol/L KOH aq. and an E_1/2 of 0.803 V(vs. RHE) in 0.1 mol/L HClO₄ aq. Moreover, our electrocatalyst shows much more improved and comparable durability in alkaline and acidic media, respectively, during 3000 cycles of cyclic voltammetry(CV) scanning relative to commercial Pt/C.     

用Matlab比较双缝干涉和双缝衍射

运用Matlab软件,对双缝衍射和双缝干涉、单缝衍射的光强分布和谱线特征进行了数值模拟,绘出实验中难以观察到的光强分布图,比较出双缝衍射与双缝干涉及单缝衍射的联系与区别。     

Bi_2MoO_6/BiVO_4异质结的水热合成和可见光催化活性(英文)

采用一步水热法制备Bi2MoO6/BiVO4复合光催化剂.利用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等手段对其晶体结构和微观结构进行了表征.结果表明,Bi2MoO6纳米粒子沉积在BiVO4纳米片表面从而形成异质结结构.紫外-可见漫反射光谱(UV-Vis DRS)表明所制备的Bi2MoO6/BiVO4异质结较纯相Bi2MoO6和BiVO4对可见光吸收更强.由于形成异质结结构及其光吸收性能使Bi2MoO6/BiVO4光催化活性有较大提高.可见光下(λ420 nm)光催化降解罗丹明B(RhB)实验结果表明,Bi2MoO6/BiVO4光催化活性较纯相Bi2MoO6和BiVO4高.Bi2MoO6/BiVO4样品光催化性能提高的原因是Bi2MoO6和BiVO4形成异质结,从而有效抑制光生电子-空穴对的复合,增大了可见光吸收范围及比表面积.     

Sr(NO_3)_2·DCH18C6配合物晶体结构与辐射稳定性

二环己基-18-冠-6(DCH18C6)可以有效地从高放废液中分离90Sr,对于减小放射性废物的危害和实现高放废物的减容有重要意义.由于在实际应用中DCH18C6处于射线照射下,其结构可能会被破坏并引起络合能力的变化,因此有必要对该配合物的辐射稳定性进行研究.本文合成了Sr(NO3)2?DCH18C6配合物晶体,并通过单晶X射线衍射(XRD)与扩展X射线吸收精细结构谱(EXAFS)等方法进行了表征,确定Sr2+与周围氧原子的配位数为10,Sr―O平均键长约为0.268 nm/0.266 nm(XRD/EXAFS).配位原子来自DCH18C6的六个氧原子以及两个作为双齿配体的硝酸根的四个氧原子.对该配合物晶体在空气中进行γ辐照,EXAFS结果表明吸收剂量为400 kGy时,Sr―O键长及配位数没有发生变化,配位结构没有被破坏,具有很好的耐辐照稳定性.显微红外光谱(Micro-FTIR)结果进一步证明辐照后冠醚环的部分C―H键氧化为羟基或羰基,但并不影响DCH18C6与Sr2+的配位结构.     

微芯片毛细管电泳法快速测定盐酸二甲双胍

提出用带有非接触电导检测的微芯片毛细管电泳法快速测定片剂中盐酸二甲双胍的含量。取盐酸二甲双胍片20片,剥除糖衣后混匀研细,称取0.100 0g,用水超声溶解、过滤,滤液定容至100mL供毛细管电泳分析。十字通道芯片使用前按规定进行清洗。试验中采用含5%(体积分数)乙醇和0.1mmol·L-1十二烷基磺酸钠的2.0mmol·L-1柠檬酸缓冲溶液作为分离介质,进时间为10.0s,分离电压为1.3kV,可在1min内实现分离和测定。盐酸二甲双胍的质量浓度在10.0~110.0mg·L-1范围内与相应峰高呈线性关系,检出限(3S/N)为1.0mg·L-1。应用此方法分析了3个片剂样品,并用标准加入法做回收试验,测得回收率在94.5%~103%之间,测定值的相对标准偏差(n=6)在0.63%~1.1%之间。     

尼龙6纳米纤维膜的制备及其对己烷雌酚的吸附性能研究

采用静电纺丝设备制备尼龙6纳米纤维膜。用静、动态吸附方法,研究了尼龙6纳米纤维膜对己烷雌酚的吸附性能,考察了吸附时间、初始浓度及介质p H值对尼龙6纳米纤维膜吸附己烷雌酚的影响。结果表明,初始浓度为2mg/L时,尼龙6纳米纤维膜吸附己烷雌酚的过程符合准一级动力学模型;当初始浓度在5~20mg/L范围内,吸附过程符合准二级动力学模型。尼龙6纳米纤维膜吸附己烷雌酚的过程符合Freundlich等温吸附模型。     

具有聚集诱导发光特性的咔唑衍生物的合成及其理化性质研究

以咔唑、亚芴基肼等为原料,通过suzuki反应合成了2个新型咔唑衍生物:N-乙基-3,6-双(亚芴基肼基-5-亚甲基-2-噻吩)咔唑(S1)和N-(亚芴基肼基-4-亚甲基苯基)-3,6-双(亚芴基肼基-5-亚甲基-2-噻吩)咔唑(S2)。用FTIR、1HNMR、元素分析对S1和S2的结构进行表征,并考察其紫外吸收光谱、荧光光谱、电化学行为和热稳定性。结果表明:S1和S2薄膜的最大发射波长分别在637和649nm处,均发射红色荧光,且S1和S2均具有良好的聚集诱导发光(AIE)特性;S1和S2的HOMO能级分别是-5.26和-5.29e V,与正电极(ITO)的功函数(-4.8 e V)相匹配,可有效降低空穴注入能垒,有利于空穴的传输;S1和S2的热分解温度分别是351和360℃,均具有良好的热稳定性。     

共振散射法测定安乃近含量

在pH=5.0的B-R缓冲溶液中,Fe(Ⅲ)与邻菲啰啉反应生成无色配合物,从而使得体系在374nm波长处产生1个较强的共振散射峰。加入安乃近(或4-甲氨基安替比林)后,其将Fe(Ⅲ)还原成Fe(Ⅱ),而生成一种橙红色配合物,使得体系在374nm(或373nm)波长处的共振散射信号减弱。在最佳实验条件下,当安乃近浓度在0.634~15.2μg/mL范围内,体系的共振散射信号△I与安乃近的浓度之间有较好的线性关系,检出限为5.75ng/mL。该方法可直接用于测定安乃近含量,回收率为100.4%~103.4%。     

化学气相沉积法制备InSe纳米片及其近红外光探测性能

采用化学气相沉积法在云母衬底上制备了二维InSe纳米片, 研究了生长温度对二维InSe纳米片晶相、 形貌、 尺寸及厚度的影响. 构筑了基于二维InSe纳米片的光探测器并研究了其光探测性能, 结果表明, 在808 nm的近红外光辐照下, 其光响应度为1.5 A/W, 外量子效率为230%, 可探测度为3.1×10 ⁸ Jones(1 Jones=1 cm·Hz ^1/2·W ^-1), 上升和衰减时间分别为0.5 和0.8 s.