含苯并硒二唑聚咔唑/芴类共轭聚电解质及其前驱体的合成与性能研究

采用Suzuki偶合反应合成了一系列新型的咔唑、芴和2,1,3-苯并硒二唑的共聚物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-双(N,N-二甲基胺丙基)芴](PCzN-BSeD)及其相应的聚电解质衍生物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-(双(3′-(N,N-二甲基)-N-乙基铵)丙基)芴]二溴(PCzNBr-BSeD).在聚咔唑和芴中引入不同比例的2,1,3-苯并硒二唑(BSeD)单元,引起了由咔唑和芴链段向窄带隙苯并硒二唑(BSeD)单元有效的能量转移.通过对聚合物电致发光性能的研究,发现用聚(3,4-亚乙基二氧基噻吩)(PEDOT)或聚(3,4-亚乙基二氧基噻吩)/聚乙烯咔唑(PEDOT/PVK)作为空穴传输层时,器件的性能相差不大,表明咔唑的引入较明显的改善了聚合物的空穴注入性能.而且几乎所有的聚合物用高功函数铝作阴极的器件和用钡/铝作阴极的器件具有相近的发光性能,表明这类聚合物具有良好的电子注入性能.     

2-糠醛缩N-乙基-3,6-二氨基咔唑双席夫碱的合成及其性能

以咔唑为起始原料经N-取代、硝化和还原反应制备中间体N-乙基-3,6-二氨基咔唑,然后以其与2-糠醛发生缩合反应制得新型双席夫碱化合物N-乙基-3,6-二(2-亚糠基亚氨基)咔唑,产率为72.36%。通过元素分析、FTIR、UV-Vis、1H NMR、溶液及固体荧光光谱、循环伏安(CV)和TG-DTA分析研究了标题化合物的分子结构、光物理特性、电化学特性和热稳定性。结果表明,化合物的DMF稀溶液在200~400 nm波段有较宽较强的紫外吸收;在365nm波长激发下,溶液发射深蓝色荧光,λem为446nm,固体荧光为λem=467nm的蓝色荧光,与溶液荧光相比固体荧光红移了21nm。由循环伏安测试得到产物的Eg=2.19e V,IP=4.99e V以及EA=2.80e V,说明其具有良好的空穴和电子传输材料性能。TG-DTA测试显示目标产物具有良好的热稳定性。该化合物在有机荧光、空穴注入传输材料以及电子传输材料方面具有潜在应用前景。     

新型含咔唑环和芳环/芳稠杂环的N-酰腙衍生物的合成及蛋白酪氨酸磷酸酶1B(PTP1B)抑制活性评价

为寻找高效、低毒的新型蛋白酪氨酸磷酸酶1B(PTP1B)抑制剂,设计并合成出了一系列新型含咔唑环和芳环/芳稠杂环的N-酰腙衍生物6～8和11.利用IR、1H NMR、13C NMR和2D NMR(包括1H-1H COSY和NOESY)谱及元素分析确定了其结构和构型.评价了目标化合物对PTP1B的抑制活性.实验结果表明,目标化合物对PTP1B均有较强的抑制活性,除了化合物N'-[9-(2-氯噻唑-5-甲基)咔唑-3-亚甲基]-2-苯氨基乙酰肼(6a)、N'-[9-(2-氯噻唑-5-甲基)咔唑-3-亚甲基]-2-(4-甲基苯氨基)乙酰肼(6b)、N'-[9-(2-氯噻唑-5-甲基)咔唑-3-亚甲基]-2-(3-硝基苯氨基)乙酰肼(6g)和N'-[9-(2-氯噻唑-5-甲基)咔唑-3-亚甲基]-2-(4-硝基苯氨基)乙酰肼(6h)外,其它化合物的活性均高于阳性对照药物齐墩果酸,其中N,N'-[(9-丁基咔唑基)-3,6-二亚甲基]-2,2'-[二(4-硝基苯氨基)]双乙酰肼(11b)的活性最高,IC50=(0.89±0.06)μmol/L.利用分子对接分别研究了代表目标化合物N'-[9-(2-氯噻唑-5-甲基)咔唑-3-亚甲基]-2-(4-溴苯氨基)乙酰肼(6d)、N'-[9-(2-氯噻唑-5-甲基)咔唑-3-亚甲基]-2-((2-(1-萘氧基)甲基)苯并咪唑-1-基)乙酰肼(7f)和11b与PTP1B酶的结合模式.     

两种新型双咔唑基席夫碱衍生物的合成及其光学性质

以N-乙基-3-甲酰基咔唑为原料,合成了两种新型的双咔唑基席夫碱衍生物——N1,N2-双(9-乙基咔唑-3-亚甲基)-1,2-乙二胺(1)和N1,N3-双(9-乙基咔唑-3-亚甲基)-1,3-丙二胺(2),其结构经1HNMR,IR和MS表征。用UV和单光子荧光光谱研究了1和2的线性光学性质。结果表明:1和2有望成为具有应用价值的发光材料。     

两种新型咔唑衍生物的合成及其光电性能

以咔唑、三苯基氯硅烷及2-溴芴为原料,经甲基化、硼酸化、Ullmann偶联、Suzuki偶联等反应合成了两种新型咔唑衍生物--3,6-二(9,9-二甲基-9H-2-芴基)-9-苯基-9H-咔唑(1a)和3,6-二[(4-三苯硅基)苯基]-9-苯基-9H-咔唑(1b),其结构经1H NMR和元素分析表征.用UV-Vis,荧光光谱和循环伏安曲线研究了1a和1b的光电性能.     

N,N’-二苯基-N,N’-二(9,9-二甲基芴-2-基)-9-己基-(4,4’-二胺基苯基)咔唑的合成方法及表征

以2,7-二溴咔唑为原料经过N-烷基化、Suzuki偶联反应、Buchwald-Hartwig偶联反应合成了有机发光二极管(OLED)空穴传输材料N,N’-二苯基-N,N’-二(9,9-二甲基芴-2-基)-9-己基-(4,4’-二胺基苯基)咔唑,利用NMR、IR和熔点等分析方法对产物结构进行了表征,并通过TG、UV-Vis及荧光光谱研究了物质的热稳定性和光学性能。     

V形咔唑衍生物的合成及荧光性质

以N-烷基咔唑作为电子给体和共轭桥中心, 二米基硼作为端基电子受体, 合成了两个V形A-π-D-π-A型新化合物: 3,6-二{[(E)-2-(5-二米基硼)噻吩]乙烯基}-N-丁基-咔唑 {N-butyl-3,6-bis{(E)-2-[5-(dimesitylboryl)thiophen-2-yl]-vinyl}-carbazole, BBTC}和3,6-二[(E)-(4-二米基硼)苯乙烯基]-N-己基-咔唑, {N-hexyl-3,6-bis[(E)-4-(dimesitylboryl)-styryl]-carbazole, BBSC}. 这两个化合物在蓝绿光波段都有较强的荧光发射. 光谱数据表明, 扩大共轭体系并在端基引入含硼基团导致吸收谱和发射谱显著红移, 并增大分子内电荷转移.     

噻吩-咔唑-苯衍生物的设计、合成及电致变色性质

以苯和二联苯单元为核,分别在其1,4位和4,4'(对位)引入噻吩-咔唑单元,设计合成了9,9'-(1,4-亚苯基)双[3,6-双(2-噻吩)]-9-氢-咔唑(BTCPh)和9,9'-[1,1'-联苯基]-4,4'-二取代基双[3,6-双(2-噻吩)]-9-氢-咔唑(BTCBPh)2种化合物;再通过电化学聚合得到相应的交联结构聚合物,分别为聚9,9'-(1,4-亚苯基)双[3,6-双(2-噻吩)]-9-氢-咔唑(p BTCPh)和聚9,9'-[1,1'-联苯基]-4,4'-二取代基双[3,6-双(2-噻吩)]-9-氢-咔唑(p BTCBPh)薄膜.利用循环伏安法(CV)、多电位阶跃、紫外-可见-近红外(UV-Vis-NIR)吸收光谱和扫描电子显微镜(SEM)等手段对其进行了表征与电化学性能测试.结果表明,2种聚合物均表现出良好的电化学性质、相似的颜色变化、较高的光学对比度及电化学循环稳定性等优异的电致变色性质.p BTCPh聚合物薄膜比p BTCBPh表现出更快的响应速度,这可能是由于前者具有更加均匀规整的堆积结构,有利于变色过程中的离子嵌入与脱出所致.     

N,N’-二苯基-N,N’-二(9,9-二甲基芴-2-基)-9-己基-(4,4’-二氨基苯基)咔唑的合成

以2,7-二溴咔唑为原料经过N-烷基化、Suzuki偶联反应、Buchwald-Hartwig偶联反应合成了N,N’-二苯基-N,N’-二(9,9-二甲基芴-2-基)-9-己基-(4,4’-二氨基苯基)咔唑。利用NMR、IR和熔点等分析方法对产物结构进行了表征,并通过TG、UV-Vis及荧光光谱研究了化合物的热稳定性和光学性能。该化合物可用作有机发光二极管(OLED)的空穴传输材料。     

侧链含金属铱配合物的电磷光白光聚合物

设计了一系列新型芴-咔唑电磷光共轭聚合物.通过共价键将双(2-(9,9-二乙基-9H-芴-2-基)吡啶-N,C2’)合铱(III)(Ir Fpy)接枝到3,6-二溴咔唑的N-烷基侧链,采用Suzuki缩聚反应合成了铱配合物(Ir Fpy)含量分别为0.25 mol%,0.5 mol%和1 mol%的聚合物PF-Ir Fpy.当引入的配合物Ir Fpy含量为1 mol%时,得到的共轭聚合物发射色坐标为(0.44,0.56)的黄光.随着接枝的铱配合物Ir Fpy在共轭聚合物中含量降低,作为主体的聚(9,9-二辛基芴)蓝光发射不能被完全淬灭,得到共聚物同时发射主体蓝光及客体铱配合物黄光的单分子白光共轭聚合物.共聚物发光器件结构为ITO/PEDOT:PSS(50 nm)/polymer+PBD(30 wt%)(80nm)/Ba(4 nm)/Al(150 nm)[氧化铟锡/苯磺酸掺杂聚乙烯基二氧噻吩/聚合物+(2,4-二苯-5-4-叔丁基苯-1,3,4-噁二唑)(w=30%)/钡/铝],基于共聚物PF-Ir Fpy025的器件流明效率为3.97 cd/A,色坐标为(0.34,0.34),非常接近于标准白光发射的色坐标(0.33,0.33).为了研究采用共聚物PF-Ir Fpy025和PF-Ir Fpy05制备的白光器件的光谱稳定性,测试了外加电压在8~13 V范围内的EL光谱,当外加电压从8 V升高到13 V时,两个EL器件都表现出了良好的EL光谱稳定性.研究结果表明,在共轭聚合物侧链上引入螯合金属铱配合物单元是实现高效、稳定的白光电致磷光器件的有效方法之一.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.